• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.10
• /
• pp.832-836
• /
• 2009

A piezoelectric ultrasonic scaler, usually used to remove the tartar out of teeth and to amputate the pubis, is a recently popular instrument for dental treatment due to its several merits such as small size, low-electric power, precision and low-cost. It has typically two parts of a tip and vibration system, which is also composed of head, piezoelectric elements and tail-mass. The scaler concentrates its displacement on tip and has commonly a resonance frequency at 25~30 kHz, and in order to improve the performance of the scaler, it is important to standardize the size of the vibration system without tip for high performance because scaler in quality differs according to several tips. In this study, a Finite Element Analysis (FEA) was utilized to optimize the structure of ultrasonic scaler in the vibration system. Consequently, this study revealed that influence of several tips on property were minimized and scaler showed good property at the resonance frequency of 28 kHz.

• Journal of Bio-Environment Control
• /
• v.17 no.4
• /
• pp.297-305
• /
• 2008

A series of experiments were conducted to suggest efficient in vitro germination conditions to improve germination rate and aseptic seedling production in chicory and garland chrysanthemum. For this purpose, various levels of NaOCl concentration and soaking treatment time combinations were tasted. Fifteen minutes of soaking treatment with 5% NaOCl solution significantly improved germination and seedling formation percentages and prevented contamination in both chicory 'Precole' and 'Chiavari' and garland chrysanthemum 'Okiku 3'. There was no significant difference in germination response between MS and 1/2 MS medium compositions, but germination and seedling formation were delayed as sucrose concentration increased. Although petri-dish among various culture containers gave rise to improved germination responses in chicory 'Precole', there was no significant difference in germination responses among culture container types in chicory 'Chiavari' and garland chrysanthemum 'Okiku 3'. The ultrasonic treatment stimulated germination and seedling formation in both chicory cultivars but there was no effect in garland chrysanthemum 'Okiku 3'. The results suggested 15 minutes with 5% NaOCl for seed sterilization, 1/2 MS medium with no sucrose and petri-dish as proper medium composition and culture container, and 120 minutes with 5% NaOCl solution of ultrasonic treatment as promoting method for in vitro germination in chicory and garland chrysanthemum.

• Korean Journal of Plant Resources
• /
• v.22 no.5
• /
• pp.381-388
• /
• 2009

Antioxidant substances were extracted from flowers of Aster scaber, Aster maackii, Coreopsis lanceolata and Coreopsis tinctoria using 2 types of extraction methods- ultrasonic wave and reflux, and antioxidant effects were compared. Higher yield of extract was obtained by ultrasonic wave method in all 4 species. Extraction time was different depending on species, but in all 4 species DPPH and ABTS free radical scavenging and ferrous ion chelating activity were higher or similar by ultrasonic wave than reflux method. Content of total polyphenol and flavonoid was mainly higher by ultrasonic wave than reflux method. Longer the treatment, the more the antioxidant activity and bioactive substances. Anti-lipid peroxidation of ultrasonic and reflux extracts obtained from flowers of Aster scaber and Coreopsis lanceolata were compared. Flower extract of Aster scaber obtained by reflux method showed the highest inhibition effect against peroxidation of linoleic acid, but extract of Coreopsis lanceolata obtained by 15-minute ultrasonic extract showed the highest effect. Ultrasonic wave extraction was more economical and efficient method than reflux extraction.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.1
• /
• pp.98-103
• /
• 2017

In this study, contributes to improving the state of this problem using cavitation by ultrasonic energy to reduce fuel costs, which take up a considerable part of ship operation costs, by making the use of on-board blended fuel oil more stable. An experiment simulating on-board blending methods was completed. Fuel (M.G.O & MF-180) was mixed at a volume ratio of 0.25:0.75 and, 0.75:0.25, and the effect of ultrasonic energy on blended fuel oil was examined after applying ultrasonic energy to blended fuel oil using an ultrasonic treatment unit. With the results, we confirmed the blending problem reported by vessels and residual carbon was reduced by up to 28.4%. In addition, based on the results for reduction of residual carbon content and dispersion stability, it was confirmed that the collapse pressure of the cavity due to the ultrasonic energy was effective to atomization of fuel particle and the temporary availability of mixed fuel containing a heavy fuel increased.

• Resources Recycling
• /
• v.31 no.4
• /
• pp.34-39
• /
• 2022

In this study, effects of ultrasonic energy on the cementation reaction and copper recovery rate were investigated for different types of iron samples, such as plate, chip, and powder, for recovering copper from waste etchant, which contained ~3.5% copper. The cementation reaction using the ultrasonic energy was more effective than the simple stirring reaction, with the former exhibiting a high copper recovery rate than the latter for the same time interval. When cementation was performed for 25 min with ultrasonic treatment, rather than simple stirring, the copper recovery rate of the plate, chip, and powder improved from 7.0% to 12.0%, 14.0% to 46.1%, and 41.9% to 77.2%, respectively. Therefore, the use of ultrasonic energy could detach the copper recovered by the cementation reaction from the surface of the iron samples, thereby increasing the copper recovery rate. Owing to the use of ultrasonic energy, the copper recovery rate increased by 2-6 times, and the recovered copper exhibited a decreased particle size compared to that obtained via simple stirring.

• Journal of Powder Materials
• /
• v.24 no.3
• /
• pp.216-222
• /
• 2017

Synthesized monocrystalline nanodiamond (nD) particles are heat-treated at various temperatures to produce highly structured diamond crystals. The heat-treated nDs show different weight loss ratios during thermogravimetric analysis. The crystallinities of the heat-treated nDs are analyzed using Raman spectroscopy. The average particle sizes of the heat-treated nDs are measured by a dynamic light scattering (DLS) system and direct imaging observation methods. Moreover, individual dispersion behaviors of the heat-treated nD particles are investigated based on ultrasonic dispersion methods. The average particle sizes of the dispersed nDs according to the two different measurement methods show very similar size distributions. Thus, it is possible to produce highly crystallized nD powder particles by a heat-treatment process, and the nD particles are relatively easy to disperse individually without any dispersant. The heat-treated nDs can lead to potential applications such as in nanocomposites, quantum dots, and biomedical materials.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.29-32
• /
• 1998

A new treatment of LiV$_3$O$_{8}$ has beer proposed for improving its electrochemical behavior as a cathode material secondary lithium batteries. Early in its development, the preparation method of LiV$_3$O$_{8}$ strongly influenced its electrochemical properties, such as discharge capacity, rate capability and cycling efficiency. In the present experiment, a new synthesis route has been applied to obtain LiV$_3$O$_{8}$ . Instead of the conventional high temperature technique leading to the crystalline form, a solution technique producing the amorphous form has been used. This material, after dehydration, shows an electrochemical performance exceeding that of the crystalline one. These measurements showed that the ultrasonic treatment process of crystalline LiV$_3$O$_{8}$ causes a decrease in crystallinity and considerable increases in specific surface area and interlayer spacing. So the ultrasonic method provides a convenient means for improving the electrochemical behavior of LiV$_3$O$_{8}$ as a cathode material for secondary lithium batteries.batteries.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.215-219
• /
• 2001

Impurities removal from waste carbon black was carried out to produce high-grade carbon black. A lot of hydrophilic carbon black is produced as a byproduct of the hydrogen production process by flame decomposition of water. Due to its impurity content such as sulphur, iron, ash and etc., it can only be used as low-grade carbon or burnt out. High-grade hydrophilic carbon black is 3-5 times more expensive than oil-based carbon black because of its process difficulties and requires pollutant treatment. Hydrophilic carbon is normally used far conductive materials for batteries, pigment for plastics, electric wire covering, additives for rubber, etc.. In these applications, hydrophilic carbon must maintain its high purity. In this study magnetic separation, froth flotation and ultrasonic treatment were employed to remove impurities from the low-grade hydrophilic carbon black. As results, the ash, iron and sulphur content of product decreased to less than 0.01wt.%, 0.0lwt.% and 0.3wt.% respectively, and the surface area of product was about 930 $m^2$/g.

• Korean Journal of Pharmacognosy
• /
• v.44 no.1
• /
• pp.47-52
• /
• 2013

We invesitagat the effects of antioxidant and suppression of MMP-1 in UV-irradiated human dermal fibroblasts (HDF) by schizandrin isolated from Schisandra chinensis. Ultrasonic technique was used to extract schizandrin from S. chinensis. The higher contents of schizandrin (6.34 mg/ml) in 70% EtOH extract obtained by ultrasonic treatment at 20 MHz for 2 h during 10 days. Schizandrin had antioxidant activities. Schizandrin (1-10 ${\mu}g/ml$) induced a significant dose-dependent decrease in the expression fo MMP-1 protein. These results suggest that schizandrin is a potential candidate for the prevention and treatment of skin aging.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.151-154
• /
• 1998

The layered trivanadate, LiV$_3$O$_{8}$ has been investigated as a cathode material for secondary lithium batteries. Early in its development the preparation method of LiV$_3$O$_{8}$ strongly influenced its electrochemical properties, such as discharge capacity, rate capability and cycling efficiency. In the present experiment, a new synthesis route has been applied to obtain LiV$_3$O$_{8}$ . Instead of the conventional high temperature technique leading to the crystalline form, a solution technique producing the amorphous form has been used. This material, after dehydration, shows an electrochemical performance exeeding that of the crystalline one. The rationale for this behavior mainly lies in microscopic factors, i.e., in the possibility for the unit cell of amorphous LiV$_3$O$_{8}$ to insert up to 9 Li$^{+}$, instead of six for crystalline LiV$_3$O$_{8}$ . The ultrasonically treated products in water were characterized by XRD, TGA, DSC, and SEM. These measurements showed that the ultrasonic treatment process of crystalline LiV$_3$O$_{8}$ causes a decrease in crystallinity and considerable increases in specific surface area and interlayer spacing.g.