• 제어로봇시스템학회논문지
• /
• 제9권12호
• /
• pp.1009-1018
• /
• 2003

In a park or street, we can see many people Jogging or walking with their dogs chasing their masters. In the previous study, an entertainment robot, CARTRI that imitates the dog's behavior was created. The robot's task was chasing a moving goal that was recognized as the master. The physical structure of the CARTRI robot was three-wheel type locomotion system. The sensor system which could detect the position of the master in the outdoor space, was consists of a signal transmitter which was held by the master and five ultrasonic receivers which were mounted on the robot. In the experiment, the robot could chase a human walking in outdoor space like a park. But it could not avoid obstacles and its behavior was only goal-chasing behavior because of the limit of the sensor system. In this study, an improved RF-ultrasonic sensor system which can detect both goal and obstacle is developed in order to enable the CARTRI robot to carry out various behavior. The sensor system has increased angle resolution by using eight ultrasonic receivers instead of five in the previous study. And it can detect obstacle by using reflective type ultrasonic sensors. The sensor system is designed so that detection of goal and obstacle could be conducted in one sampling period. The Performance of the developed sensor system is evaluated through experiments.

• 전기학회논문지P
• /
• 제51권4호
• /
• pp.193-197
• /
• 2002

In this paper, the ultrasonic sensor for gas flowmeter was simulated, fabricated and measured according to the assembly step and the piezoelectric vibrator layers. The simulated resonant frequency and the measured resonant frequency were similar except two layer sensor. The simulated resonant frequency of three layer sensor was 48 kHz and the measured resonant frequency of three layer sensor was 45.2 kHz. From the results, the ultrasonic sensor for gas flowmeter could be designed and expected without fabrication.

• 융합신호처리학회논문지
• /
• 제10권3호
• /
• pp.198-206
• /
• 2009

본 논문에서는 빔 폭이 중첩된 초음파 센서 링을 이용하여 초음파 센서의 위치 불확실성을 감소시키고 이를 토대로 이동로봇이 효율적으로 장애물을 탐지하도록 하는 방안에 대해 기술하도록 한다. 기본적으로, 원형 이동로봇 측면에 상대적으로 적은 개수의 중저가의 저지향성 초음파 센서들이 일정 간격으로 상호 빔 폭이 중첩되도록 배치되어 있다고 가정한다. 첫째, 단일 및 이중 장애물에 대해 빔 폭 중첩 상태를 이용하여 초음파 센서 고유의 위치 불확실성을 감소시킬 수 있음을 보이고 또한 그 향상 정도를 정량적으로 제시한다. 둘째, 2개 또는 1개의 초음파 센서로부터 장애물 측정 거리 데이터가 주어질 때, 이동로봇의 중심을 기준으로 하여 장애물의 위치를 산정하는 기하학적 방법을 고안한다. 셋째, 정규 분포, 포물선 분포, 균일 분포, 임펄스 등 기존의 단일 초음파 센서 모델을 비교 검토한 후, 위치 불확실성 및 소요 연산량 측면에서 장애물 탐지에 적합한 중첩 초음파 센서 모델을 수립한다. 마지막으로, 자체 제작된 초음파 센서 링을 이용한 단일 장애물 및 복수 장애물 탐지 실험을 통해 제안된 중첩 초음파 센서의 효용성을 입증한다.

• 산업기술연구
• /
• 제26권B호
• /
• pp.249-255
• /
• 2006

In this paper, we study the river level/velocimetry measuring system using the ultrasonic sensor to acquire the more precise data from the river circumstance in rainy season. We design the two ultrasonic sensor system to calculate the water level and surface current speed of the river using the dedicated hardware and software. We investigate the validity and effectiveness of the proposed system which applied to the real river environment monitoring system that will be extended to the GIS.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.169-174
• /
• 2006

The outstanding mechanical property of optical fiber and the merits of acoustic emission sensing technique are unified for novel sensor system. The generated ultrasonic wave from piezoelectric generator are propagated along the optical fiber and also sensed. The propagated wave can be influence by external pressure on the optical fiber or environmental circumstance. The optical fiber sensor using ultrasonic wave has advantages compare with existing sensor system. In this study, the sensitivity of the optical fiber sensor is experimentally investigated. As the applications of the optical fiber sensor system using piezoelectric ultrasonic waves, the point load on the optical fiber is measured and the monitoring system for the void fraction of two phase flows is developed. The experimental results show the linear relationship between sensed voltage and void fraction.

• Smart Structures and Systems
• /
• 제1권1호
• /
• pp.47-61
• /
• 2005

A ring-shaped lead zirconate titanate (PZT) piezoceramic sensor has been integrated with the Langevin-type piezoceramic driver of an ultrasonic wire-bonding transducer to form a smart transducer for in-situ measurement of three essential bonding parameters: namely, impact force, ultrasonic amplitude and bond time. This sensor has an inner diameter, an outer diameter and a thickness of 12.7 mm, 5.1 mm and 0.6 mm, respectively. It has a specifically designed electrode pattern on the two major surfaces perpendicular to its thickness along which polarization is induced. The process-test results have indicated that the sensor not only is sensitive to excessive impact forces exerted on the devices to be bonded but also can track changes in the ultrasonic amplitude proficiently during bonding. Good correlation between the sensor outputs and the bond quality has been established. This smart transducer has good potential to be used in automatic process-control systems for ultrasonic wire bonding.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 학술대회 논문집 전문대학교육위원
• /
• pp.131-134
• /
• 2002

In this paper, the ultrasonic sensor for gas flowmeter was simulated, fabricated and measured with assembly step and piezoelectric vibrator layers. The simulated resonant frequency and the measured resonant frequency were similar except sensor 2. The simulated resonant frequency of sensor 3 was 48 kHz and the measured resonant frequency of sensor 3 was 45.2 kHz. From the results, the ultrasonic sensor for flowmeter could be designed and expected without fabrication.

• 센서학회지
• /
• 제22권4호
• /
• pp.292-296
• /
• 2013

The ultrasonic wind sensor that pass through the air, beating the delivery of ultrasonic wind speed increases or decreases by the physical characteristics of the wind speed and the direction of the sensor, the transmission and reception of ultrasonic time difference measured by a two-axis vector wind and wind speed measured by calculating a device that converts the digital signal is Anemometer and wind direction meteorological facilities management, management of the ship sail used for various purposes, including, but used the existing 3-cup (mechanical) anemometer wind rotor caused by mechanical wear parts replacement due to the short-term, the reliability of the product is low, parts replacement, and according to the characteristics caused the car, there is a problem in high maintenance costs. In addition, because the bearings use of the marine environment and the cryogenic environment was constrained. In this study, the excellent long-term reliability, using ultrasonic-type environment that is not constrained to produce wind anemometer located $90^{\circ}$ conformal road using four piezoelectric sensors were fabricated structures, the piezoelectric oscillator circuit produces a rash and receiving transmit and receive speeds the car through the two-axis vector calculation to measure wind velocity processor firmware programming, and its characteristics were tested.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.212-213
• /
• 2008

Ultrasonic fiber sensor is more cost-effective than optical fiber sensor using light. However, optical fiber lines are separately used for sensing. Thus, if it is applied for huge system, it is need many lines of the sensor systems. To overcome this point, novel ultrasonic sensor systems considering wave cancellation and modulation were newly developed. By using this schema, reference-free sensor system can be developed. By using ultrasonic waves of different excitation frequencies, multiple input-signal output sensor system was also developed by applying spectrum analyses. Using the array type sensor system, the leakage of liquid and its evaporation can be monitored successfully.

• 융합신호처리학회논문지
• /
• 제12권4호
• /
• pp.341-347
• /
• 2011

본 논문에서는 유효 빔 폭 개념을 새로이 도입하여 중첩 초음파 센서 링의 성능 평가, 최적 설계, 그리고 복합 장애물 탐지에 대해 기술하도록 한다. 일군의 동종 저지향성 초음파 센서들이 반경이 영이 아닌 원주 상에 일정 간격으로 상호 빔 폭이 중첩되도록 배치된다고 가정한다. 첫째, 중첩 초음파 센서 링의 전역 위치 불확실성을 전체 장애물 탐지 범위 내에서의 국부적 위치 불확실성의 평균값으로 나타낸다. 중첩 초음파 센서 링의 유효 빔 폭을 동일한 전역 위치 불확실성을 갖는 단일 초음파 센서의 빔 폭으로 산정하고 이를 바탕으로 정규화된 장애물 탐지 성능 평가 지수를 정의한다. 둘째, 정의된 성능 평가 지수를 이용하여 장애물 탐지 시 위치 불확실성이 최소화되도록 중첩 초음파 센서 링의 설계 사양을 최적화한다. 주어진 초음파 센서의 사용 개수에 대한 중첩 초음파 센서 링의 최적 반경 그리고 주어진 중첩 초음파 센서 링의 반경에 대한 초음파 센서의 최적 사용 개수를 결정한다. 셋째, 3개의 인접 초음파 센서로부터의 장애물 거리 간의 대소 관계에 의거한 복수 장애물의 위치 불확실성 영역 판정 기준을 제시한다. 제시된 위치 불확실성 영역판정 기준을 이용하여 다양한 형태의 장애물로 구성된 복합 장애물 환경에서의 장애물 윤곽 추출 결과를 보인다.