• 비파괴검사학회지
• /
• 제28권4호
• /
• pp.364-371
• /
• 2008

소듐냉각고속로 원자로 내부구조물의 소듐내부가시화를 위한 새로운 웨이브가이드 초음파센서를 개발하였다. 소듐냉각고속로에 적용할 수 있는 웨이브가이드 초음파센서 어셈블리의 구조 설계 개념을 제시하고 그 적용 타당성을 평가하였다. 길이가 10 m인 웨이브가이드 초음파센서 어셈블리를 제작하고 성능평가 시험을 수행하였다. $A_0$ 모드 판파의 장거리 전파 성능을 확인하였으며, 수중 C-스캔 분해능 성능시험을 수행하여 웨이브가이드 초음파센서의 적용 가능성을 실험적으로 검증하였다.

• 한국분말재료학회지
• /
• 제26권3호
• /
• pp.201-207
• /
• 2019

Tungsten heavy alloys (W-Ni-Fe) play an important role in various industries because of their excellent mechanical properties, such as the excellent hardness of tungsten, low thermal expansion, corrosion resistance of nickel, and ductility of iron. In tungsten heavy alloys, tungsten nanoparticles allow the relatively low-temperature molding of high-melting-point tungsten and can improve densification. In this study, to improve the densification of tungsten heavy alloy, nanoparticles are manufactured by ultrasonic milling of metal oxide. The physical properties of the metal oxide and the solvent viscosity are selected as the main parameters. When the density is low and the Mohs hardness is high, the particle size distribution is relatively high. When the density is high and the Mohs hardness is low, the particle size distribution is relatively low. Additionally, the average particle size tends to decrease with increasing viscosity. Metal oxides prepared by ultrasonic milling in high-viscosity solvent show an average particle size of less than 300 nm based on the dynamic light scattering and scanning electron microscopy analysis. The effects of the physical properties of the metal oxide and the solvent viscosity on the pulverization are analyzed experimentally.

• Nuclear Engineering and Technology
• /
• 제20권3호
• /
• pp.170-178
• /
• 1988

중수로형 핵연료의 피복재로 사용되는 Zircaloy-4관의 결함검사를 위한 자동초음파 탐상 장치가 개발되었다. 이 장치에는 중심진동수가 14 MHz이고 대역폭이 11MHz인 집속 초음파 펄스를 사용한 수침 펄스-에코우 탐상기술과 특별히 고안된 시험수조 이송식 초음파주사 기술이 적용되었다 같은 크기와 방향을 갖는 관내외면 결함들을 같은 높이의 초음파 신호로 검출하기 위한 초음파 빔의 최적입사각은 26도이었다. Zircaloy-4피복관의 최대 허용 결함인, 깊이가 관두께의 10%인 0.04 mm이고, 길이가 0.76 mm인 축방향 및 길이가 0.38 mm인 원주방향 V형 인공결함들이 관내외면에 개재된 표준시험관을 사용하여 이 장치의 성능시험을 수행하였다. 그 결과 인공 표준시험관내의 모든 결함들을 매우 우수한 재현성을 갖고 분당 약 1m의 속도로 검출할 수 있었으며 이때의 신호 대 잡음 비는 축방향 결함에 대해서는 20 dB, 원주방향 결함에 대해서는 12 dB 이상이었다.

• 대한치과기공학회지
• /
• 제46권1호
• /
• pp.8-14
• /
• 2024

Purpose: This study compares the deformation of traditional resin dentures to resin dentures printed with digital light processing (DLP). Methods: Eleven edentulous research models were developed. Ten of them were made with traditional resin dentures. The remaining one was prepared for scanning and 3D (three-dimensional) printing. Ten traditional resin dentures were made, with the remaining artificial teeth created using 3D software and a DLP printer. Traditional resin dentures, 3D printed resin denture artificial teeth, and a denture base with artificial teeth were all cleaned simultaneously in an ultrasonic cleaner for 3 minutes. Three groups were assigned four artificial tooth measurement points, which were then measured with digital calipers. The measured data was analyzed using descriptive statistics. The significance test was conducted using a nonparametric test Kruskal-Wallis test due to the small number of specimens (α=0.05). Results: The traditional resin dentures had the lowest strain rate at -0.04%, while the group that manufactured only artificial teeth had the highest strain rate at -0.09%. However, no statistically significant difference was observed between the 3 groups (p>0.05). Conclusion: During ultraviolet-type ultrasonic cleaning, traditional resin dentures (TD group) and denture base with artificial teeth made of DLP (DD group) demonstrated stable durability, whereas the artificial teeth made of DLP (AD group) with only artificial teeth did not show a good deformation rate.

• 수산해양기술연구
• /
• 제25권4호
• /
• pp.200-208
• /
• 1989

200MHz ZnO변환기를 이용하여 초음파 현미경을 제작하여, 도미비늘을 화상화하고 광학현미경에 의한 사진과 비교하였다. 그 결과 광학적 반사에 의한 표면의 화상과 초음파의 기계적 탄성적 표면하 반사에 의한 화상에는 다소 차이가 있음을 확인하였다(Fig. 13 및 14). 초음파 현미경은 고체재료 또는 생물조직 상(10(12)등 여러 가지 생물연구 등의 응용이 계획되고 있으며, 특히 초음파 의학의 분야는 그 활용이 눈부실 것으로 예측된다. 초음파 현미경의 제작 그 자체보다, 이것을 도구로 하여 여러 가지 학술적, 기술적 성과가 기대되기 때문에 이 분야의 기초연구가 더욱 중요하게 생각되며 첨단산업분야에서도 비파괴검사 초음파 micro spectroscopy(U.M.S)등과 같은 물질의 탄성적 성질을 micro scale로 계측할 수 있는 등, 많은 활용이 있을 것이 예상된다. 또 초음파 현미경의 방법도 여러 가지이며, 이것을 계측수단으로 일반화하는 문제도 연구할 필요가 있다. 앞으로 광학이나 전자장치 등과 함께 급속한 발전이 기대된다.

• Restorative Dentistry and Endodontics
• /
• 제17권2호
• /
• pp.365-382
• /
• 1992

The purpose of this study was to evaluate the adaptation of filling material to the dentinal walls of root canals with and without smear layer. Fifty extracted upper and lower anterior teeth were selected, and the root canals were instrumented with K - files 1mm short of the apical foramen by step - back method. The teeth were randomly divided into two groups of 25 each : in the group I, smear layers were not removed, and in the group II, smear layers were removed by 15% EDTA solution. Again the two groups 25 teeth were randomly divided into unfilled contol group and filling groups(lateral, ultrasonic, ULTRAFIL, McSpadden compaction group). Upon completion of root canal filling, the teeth were grooved on the both the labial and lingual surfaces and then split with mallet and chisel. Each specimens were examined with JSM - 840 Scanning Electron Microscope (JEOL., Japan). The results were as follows : 1. In the contol group, dentinal tubules of group I couldn't be distinguished in the canal wall, but those of group II appeared to be open and patent. 2. In the filling groups of group I, the tubular penetration of the sealer or gutta percha couldn't be seen, but in the filling groups of group II, it could be seen except McSpadden compaction group. 3. In the filling groups, ULTRAFIL group showed the best adaptation of filling material to root canal wall among the group I, and lateral and ultrasonic condensation group showed the best adaptation of filling material among the group II. McSpadden compaction group showed the worst adaptation in group I, II. 4. Generally, the group II showed better adapation of filling material to root canal wall than the group I.

• 대한화학회지
• /
• 제44권6호
• /
• pp.592-599
• /
• 2000

여러 가지 온도, 조성 및 농도에서 이성분계 세라믹 복합체 TPSZ(titania partially-stabilized zirconia)의 미분말을 초음파분무열분해법에 의하여 합성하였으며, 합성공정인자가 분체특성에 미치는 영향을 검토하고, 합성된 분체의 특성을 조사하였다. 출발용액의 제조는 금속염의 농도가 0.025~0.1 M이 되도록 증류수에 용해하고, 그 조성비는 $ZrO_2$ 90~97.5 wt%에 $TiO_2$ 2.5~10 wt%가 되도록 하였다. 합성시 열분해 영역에서의 온도는 건조부가 400~550$^{\circ}C$, 반응부는 800~1100$^{\circ}C$로 하였으며, 합성된 분체는 습식으로 포집하여 110$^{\circ}C$에서 3시간 동안 건조하였다. 합성된 미분체의 특성을 Raman Spectroscopy, X-ray diffraction(XRD), Scanning Electron Microscopy(SEM), Transmission Electron Microscopy (TEM) 및 Particle Size Analyzer(PSA)로써 조사하였고, Inductively Coupled Plasma-Atomic Emission Spectroscopy(ICP-AES)로써 순도 및 조성을 분석하였다.

• Restorative Dentistry and Endodontics
• /
• 제40권2호
• /
• pp.149-154
• /
• 2015

Objectives: This study evaluated the penetration depth of 2% chlorhexidine digluconate (CHX) into root dentinal tubules and the influence of passive ultrasonic irrigation (PUI) using a confocal laser scanning microscope (CLSM). Materials and Methods: Twenty freshly extracted anterior teeth were decoronated and instrumented using Mtwo rotary files up to size 40, 4% taper. The samples were randomly divided into two groups (n = 10), that is, conventional syringe irrigation (CSI) and PUI. CHX was mixed with Rhodamine B dye and was used as the final irrigant. The teeth were sectioned at coronal, middle and apical levels and viewed under CLSM to record the penetration depth of CHX. The data were statistically analyzed using Kruskal-Wallis and Mann-Whitney U tests. Results: The mean penetration depths of 2% CHX in coronal, middle and apical thirds were $138{\mu}m$, $80{\mu}m$ and $44{\mu}m$ in CSI group, respectively, whereas the mean penetration depths were $209{\mu}m$, $138{\mu}m$ and $72{\mu}m$ respectively in PUI group. Statistically significant difference was present between CSI group and PUI group at all three levels (p < 0.01 for coronal third and p < 0.001 for middle and apical thirds). On intragroup analysis, both groups showed statistically significant difference among three levels (p < 0.001). Conclusions: Penetration depth of 2% CHX into root dentinal tubules is deeper in coronal third when compared to middle and apical third. PUI aided in deeper penetration of 2% CHX into dentinal tubules when compared to conventional syringe irrigation at all three levels.

• 대한조선학회지
• /
• 제26권4호
• /
• pp.67-80
• /
• 1989

복합적층 구조물의 체결특성을 연구하기에 앞서 구조물 제작시 필연적으로 대두되는 원공이 있는 적층판의 기 제시된 몇 가지 파괴해석 모델을 고찰하고, 파괴특성을 알아 보았다. 또한, 원공이 있는 단일방향 복합재료와 $[{\pm}45^{\circ}]2s,\;[0^{\circ}/90^{\circ}]2s,\;[{\pm}45^{\circ}/0^{\circ}/90^{\circ}]s$ 적층판의 시편실험 결과를 이용, 특성길이를 계산하여 파손강도를 예측하고자 했다. AE(Acoustic Emission) 실험평가는 주로 손상의 발생과 거동을 추적하여 파손과정을 평가하는 방법으로 사용했고 Ultrasonic 시험법은 초기 손상검출, 손상 영역의 크기를 규명하고자 했다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.650-655
• /
• 1993

Carbon/epoxy composite(CFRP) coupons previously damaged by low velocity impact were tested under static tensile loading and microscope progress of damage was characterized by ultrasonic C-scan, Scanning Acoustic Microscopy (SAM) and Acoustic Emission(AE) techniques which were based on the application of elastic waves. The degress of impact damage has been correlated with the AE activity during monotonic or loading/unloading tensile testing as well as the result of ultrasonic test. The coupons were subjected to impact velocities ranged from 0.71 to 2.17 m/sec, which introduced the amount of damage rated as 0%, 10%, 30%, and 50% with reference to the total absorbed energy at fracture. Special attention was paid to determine optimal AE parameters to characterize the microscopic fracture process and to predict the residual strength of composite laminates. AE RMS voltage during the early stage of tensile loading was found an effective parameter to quantify the degree of impact damage. It was also found that the Felicity ratio is closely related to the stacking sequence and the residual strength of the CFRP laminates.