• 비파괴검사학회지
• /
• 제28권4호
• /
• pp.358-363
• /
• 2008

재료의 미세열화를 측정하는 비파괴검사법으로 초음파의 비선형파라미터 측정기법이 최근 주목받고 있다. 하지만 그 크기가 매우 작기 때문에 여러 측정 인자들로부터 영향을 받아 일관성 있는 측정이 어렵다. 따라서 본 연구에서는 접촉식 탐촉자를 이용한 초음파 비선형파라미터의 측정에서 측정시스템에 의존하는 인자들의 영향을 연구하였다. 그 결과 탐촉자 접촉압력과 인가전압이 충분히 클수록 시스템 비선형성의 영향을 줄일 수 있음을 알 수 있었다. 이 연구의 결과는 정확한 비선형파라미터의 측정을 위한 실험조건을 설정하는 방법으로서 유용하게 사용될 것이 기대된다.

• Corrosion Science and Technology
• /
• 제18권5호
• /
• pp.196-205
• /
• 2019

Surface modification techniques are known to improve SCC by adding large compressive residual stresses to metal surfaces. This surface modification technology is attracting attention because it is an economical and practical technology compared to the maintenance method of existing nuclear power plants. Surface modification techniques include laser, water jet and ultrasonic peening, pinning and ultrasonic Nano-crystal surface modification (UNSM). The focus of this study was on the effect of ultrasonic amplitude in UNSM treatment on the corrosion properties of Alloy 600. A microstructure analysis was conducted using an optical microscope (OM), scanning electron microscope (SEM) and electron backscattering diffraction (EBSD). A cyclic polarization test and AC-impedance measurement were both used to analyze the corrosion properties. UNSM treatment influences the corrosion resistance of Alloy 600 depending on its amplitude. Below the critical amplitude value, the pitting corrosion properties are improved by grain refinement and compressive residual stress, but above the critical amplitude value, crevices are formed by the formation of overlapped waves. These crevices act as corrosion initiators, reducing pitting corrosion resistance.

• 한국정밀공학회지
• /
• 제14권5호
• /
• pp.85-91
• /
• 1997

Air grinding time in grinding process has a great effect on its efficiency due to low feedrate. This paper presents a reduction methos of air grinding time in cylindrical plunge grinding operation. Tje reduction of air grinding time is accomplished by finding the distance between contact point and rising point of ultra- sonic signal of the grinding wheel to workpiece. It uses a variation of sound signal generated by the flow of coolant when the grinding wheel approaches to workpiece. The ultrasonic sensor with 23 kHz center fre- quency and 8 kHz bandwidth is used to find the nearest approaching point(NAP). Monitoring and control system of the grinding conditions is implemented with CNC controller to control feedrate override and ultrasonic sensor to find NAP. The experimental result shows that the ultrasonic signal is a good measure- ment to find NAP. But it needs the considerations for the effect of the relationship between flowrate of coolant and diameter of workpiece.

• 한국약용작물학회지
• /
• 제23권2호
• /
• pp.155-160
• /
• 2015

This research evaluate antioxidant and skin-whitening effect of Abeliophyllum distichum Nakai by extraction processes. First, antioxidant effects were follows: EE (70% ethanol extract) showed higher DPPH scavenging activity of 69.66% than WE (hot water exract) 59.13% at $0.3mg/m{\ell}$, also UE's (70% ethanol extract by sonication process) higher than EE. Reducing power was that also EE showed higher than WE, and it was the highest value with UE's because of ultrasonic pretreatment. Next, the whitening effect tyrosinase inhibition activity was measured that EE was 23.88%, WE's was 16.69%, and UE was 23.34%. Ultrasonic pretreatment did not influence to tyrosinase inhibition activity. Cell viability showed low cell toxicity in all groups. UE's inhibited melanin synthesis, 55.1%, that is higher than EE and WE, 52.7% and 39.5%, respectively. As a result, we confirmed that antioxidant activities and skin-whitening effect by extraction process. Also, this results confirmed that the Abeliophyllum distichum Nakai extracts worth as cosmetic materials.

• Journal of Welding and Joining
• /
• 제23권6호
• /
• pp.87-92
• /
• 2005

It has been well hewn that ductile fracture of steels is accelerated by triaxial stresses. The characteristics of ductile crack initiation in steels are evaluated quantitatively using a two-parameters criterion based on equivalent plastic strain and stress triaxiality. The present study focuses on the effects of strength mismatch, which can elevate plastic constraint due to heterogeneous plastic straining, on the critical condition for ductile fracture initiation usinga two-parameter criterion. Fracture initiation testing has been conducted under static loading using notched round bar specimens which had different notch locations. This study provides the fundamental clarification of the effect of strength mismatching and effect of notch location on the critical condition to ductile crack initiation from notch root using fuite element method and ultrasonic-mechatronics system. The critical condition of ductile crack initiation from notch root of strength mismatched tensile specimens under static loading appeared to be almost the same as those of homogeneous tensile specimens with circumferential sharp notch specimen. Also, the effect of notch location in mismatched specimens was estimated using finite element(FE) analyses.

• 한국안광학회지
• /
• 제16권1호
• /
• pp.31-40
• /
• 2011

목적: 본 연구는 안경원에서의 안경용 초음파세척기를 이용한 소프트렌즈 세척 실태를 조사하고 세척용기를 달리하였을 때의 단백질 제거 효과를 비교하기 위하여 수행되었다. 방법: 서울시 소재 75개 안경원을 대상으로 소프트렌즈 세척 실태에 관한 설문조사를 실시하였다. 또한 인공누액을 사용하여 소프트렌즈에 인위적으로 단백질을 침착시킨 후 세척용기를 달리하여 안경용 초음파세척기로 세척한 후 단백질 잔존량을 측정함으로써 세척효율을 비교하였다. 또한 반복적인 초음파 세척으로 인한 소프트렌즈의 표면과 습윤성 변화를 분석하였다. 결과: 안경원에서 콘택트렌즈 세척에 안경용 초음파세척기를 이용하는 주목적은 신속함 때문임을 확인하였다. 세척용기로 플라스틱 렌즈 용기와 유리병 렌즈용기를 사용하고 안경용 초음파세척기로 소프트렌즈를 세척한 경우 유리병 렌즈용기를 사용하였을 때 세척효율이 높은 경향을 보였으나 유의성 있는 차이는 아니었다. 한편 반복적인 초음파 처리로 인하여 소프트렌즈의 표면과 습윤성의 변화가 나타남을 관찰할 수 있었다. 결론: 안경용 초음파세척기 이용 시 세척용기로 플라스틱 렌즈용기와 유리병 렌즈용기의 사용이 모두 효과적이었지만 반복적인 초음파 세척 시에는 세척용기를 사용하였다 하더라도 초음파로 인한 소프트렌즈의 변성이 우려되므로 주의를 기울여 사용하여야 것이다.

• 한국음향학회지
• /
• 제40권5호
• /
• pp.408-416
• /
• 2021

초음파 분산에 있어서 초음파의 방사면이 시료에 직접 닿는 것을 피하기 위해 액체시료는 유리용기에 의해 분리되어 음향매질에 의해 초음파 에너지를 받는다. 이와 같이 다층구조로 이루어진 음향시스템에서 초음파에너지의 전달효율은 중요한 요소이다. 본 연구에서는 다층구조로 이루어진 음향시스템에 있어서 프로필렌글리콜 용액을 액체정합층으로 사용하여 초음파에너지 전달효율을 개선하는 방법을 제안하였다. 제안된 방법에서는 란주반형 초음파 트랜스듀서와 루미놀용액과의 사이에 프로필렌글리콜 용액을 액체정합층 매질로 채우고, 초음파트랜스듀서로부터 방사되는 강력초음파의 비선형현상에 의해 발광되는 루미놀용액의 발광정도를 광전증폭관을 이용하여 관측하여 루미놀용액으로의 초음파에너지 전달 효율을 조사하였다. 프로필렌글리콜 농도변화에 따른 초음파에너지 전달정도를 측정하였고, 그 결과 프로필렌글리콜 용액의 농도가 증가함에 따라 정합효과는 증가하는 반면 음향감쇠가 증가함을 알 수 있었다. 이들 두 상충되는 조건이 절충되는 최적의 농도가 존재함을 확인할 수 있었으며, 프로필렌글리콜 용액의 최적 농도를 실험적으로 결정할 수 있었다.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2001년도 추계 기술심포지움
• /
• pp.138-140
• /
• 2001

Fluxless flip chip bonding using plasma & ultrasonic wave was investigated in order to evaluate the effect of plasma & ultrasonic treatment on the bondability of the Sn-3.5wt%Ag solder bumped die to TSM-coated glass substrate. The $Ar+10%H_2plasma$ was effective in removing tin oxide on solder surface. The die shear strength of the plasma-treated Si-chip is higher than that of non-treated specimen but lower than that of specimen bonded with flux. The die shear strength with the bonding load at 25W ultrasonic power increased to 0.8N/bump for all bonding temperature but decreased above 1.0N/bump.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.783-788
• /
• 2001

Voids created with concrete construction or deterioration result in serious weakness from the aspects of both structural and durable function. Ultrasonic method using image processing technique was used for detecting pattern of voids in concrete in this study Experimental investigation was carried out for three types(patterns) of void in concrete. The effect of curing period of concrete and ultrasonic measurement method was also investigated. As a result it has been verified that the semi-direct measurement method is more effective than the other methods for detecting pattern of voids in concrete in ultrasonic method using image processing technique. The longer the curing period of concrete is, the better the detection accuracy of void pattern can be obtained.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.149-154
• /
• 2004

In the semiconductor and the optical industry a new transport system which can replace the conventional sliding system is required. These systems are driven by magnetic field and conveyer belt. The magnetic field damages semiconductor and contact force scratches the optical lens. The ultrasonic wave driven system can solve these problem. In this paper, the relationship of transporting speed according to the change of flexural beam shape and the effect of transporting speed according to the change of weight and amplification voltage are verified. The vibration behavior of flexural beam in the ultrasonic transport system is experimented using Laser Scanning Vibrometer.