• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.139.2-139.2
• /
• 2005

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 춘계학술발표회 논문집
• /
• pp.349-350
• /
• 2012

Porous silicon (PS) was prepared by electrochemical anodization. Ultra-thin zinc oxide (ZnO) capping layers were deposited on the PS by plasma-assisted molecular beam epitaxy (PA-MBE). The effects of the ZnO capping layers on the properties of the as-prepared PS were investigated using scanning electron microscopy (SEM) and photoluminescence (PL). The as-prepared PS has circular pores over the entire surface. Its structure is similar to a sponge where the quantum confinement effect (QCE) plays a fundamental role. It was found that the dominant red emission of the porous silicon was tuned to white light emission by simple deposition of the ultra-thin ZnO capping layers. Specifically, the intensity of white light emission was observed to be enhanced by increasing the growth time from 1 to 3 min.

• 한국정밀공학회지
• /
• 제22권6호
• /
• pp.175-182
• /
• 2005

Inner structured and bonded panel, or ISB Panel, as a kind of sandwich type panel, has metallic inner structures which have low relative density, because of their dimensional shape of metal between a pare of metal skin sheets or face sheets. In this work, ISB panels and inner structures formed as repeated pyramidal shapes are introduced. Pyramidal structures are formed easily with expanded metal sheet by the crimping process. Three kinds of pyramidal structures are made and used to fabricate test specimen. Through the multi-point electrical resistance welding, inner structures are bonded with skin sheet. 3-point bending tests are carried out to measure the bending stiffness of ISB panel and experimental results are discussed.

• 한국전자파학회논문지
• /
• 제27권7호
• /
• pp.653-659
• /
• 2016

본 논문은 공중에서 회전하면서 광대역 신호를 방향 탐지하고 수신하는 반사판 안테나 급전기용 초광대역 LPDA(Log-Periodic Dipole Array) 안테나를 제안한다. S 대역부터 Ka 대역까지 20:1 이상의 초광대역 특성을 확보하기 위해 평면기판 위에 방사소자를 인쇄하였고, 기판 사이에 견고한 구조의 쐐기형 유전체 지지대를 삽입하였다. 또한, 무게를 줄이기 위해 지지대 중심 부분을 스티로폼 재질로 대체하였다. 설계된 LPDA 안테나의 5-dB 반사손실 대역폭은 시뮬레이션 37.57:1(1.09~40.95 GHz), 측정 33.85:1(1.31~44.35 GHz)로 초광대역 특성을 나타내었다. 동작 대역에서 평균 이득은 시뮬레이션, 측정 각각 5.79 dBi, 5.76 dBi로서 요구하는 이득을 확보하였다. 제안된 견고하고 가벼운 초광대역 LPDA 안테나는 항공용으로 적용될 수 있음을 확인하였다.

• 대한기계학회논문집A
• /
• 제29권3호
• /
• pp.470-476
• /
• 2005

Ultra light metal structures have been studied for several years because of their superior specific stiffness, strength and potential of multi functions. Many studies have been focused on how to manufacture ultra light metal structures and optimize them. In this study, we introduced a new idea to make sandwich panels having octet truss cores. Wires bent in a shape of triangular wave were assembled to construct an Octet truss core and it was bonded with two face sheets to be a sandwich panel. The bending & compressive strength and stiffness were estimated through elementary mechanics for the sandwich specimens with two kinds of face sheets and the results were compared with the ones measured by experiments. Some aspects of assembling and mechanical behavior were discussed compared with Kagome core fabricated from wire, which had been introduced in the authors' previous work.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.389-392
• /
• 2008

최근 들어 콘크리트 구조물이 대형화됨에 따라 초고강도 콘크리트에 대한 관심이 높아지고 있다. 초고강도 콘크리트 개발을 위해서는 혼화제, 혼합재 등의 재료와 더불어 골재의 품질(초고강도, 균질성)이 중요한 요인으로 작용한다. 그러나 일반적으로 사용되는 자연골재(쇄석 포함)는 전체 로트가 초고강도 품질을 유지하기가 어렵기 때문에 초고강도용으로 사용하기에는 많은 제약점이 있다. 본 연구에서는 균일한 초고강도 품질을 보장할 수 있는 세라믹 골재를 개발하여 초고강도 콘크리트에 적용하였다. 골재와 시멘트 페이스트 계면의 접착력을 높이도록 표면 코팅 처리된 초고강도 세라믹 골재를 적용하여 초고강도 콘크리트를 제조하였다. 천연 골재와 비슷한 비중의 세라믹 골재와 더불어 세라믹 골재를 경량화(밀도 2.2 $g/cm^3$)한 콘크리트 실험도 실시하였다.

• 대한전자공학회논문지
• /
• 제25권5호
• /
• pp.495-500
• /
• 1988

The effectiveness of tri layer resist (TLR) technique is compared with that of single layer resist (SLR) technique in order to make a 0.8um pattern with the linewidth deviation of 10 percents. SLR technique is not appropriate to shape the micro-pattern on oxide and aluminum steps because of the standing wave effect and the light scattering effect in shaping the resist pattern. On the contrary, the uniform line with a width of 0.8um on oxide and aluminum steps can be formed by TLR technique, reducting such effects. The planarization and the light absorption coefficient of the bottom layer resist in TLR are optimized by exposing it to ultra violet light after baking it for 30min at 230\ulcorner. An uniform line with a width of 0.8um on oxide step is defined with the light absorption coefficient of 0.85 whereas that on aluminum step is defined with 0.95.

• 한국어업기술학회:학술대회논문집
• /
• 한국어업기술학회 2000년도 춘계수산관련학회 공동학술대회발표요지집
• /
• pp.153-154
• /
• 2000

Many bioactive photosensitizers have been isolated from plants and some of theses possess antiviral activities which, depend on UVA(320-400nm) and visible light. Many complex quinonoids have been isolated from plants and recently some of them, such as hypericin and hypocrellin, have been shown to possess light-dependent antiviral activities. these compounds only exert their desired biological activities in the presence of long wavelength ultra-violet UVA but these activities are also strongly influenced b chemical structure(Hudson et al, 1995). the importance of light in the use of certain medicinal plant extracts has been appreciated, if not understood, for centuries. Also, many seaweed extracts will effect photo(UVA, visible light) for algicidal activity. (omitted)

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 제5회 박판성형 SYMPOSIUM
• /
• pp.40-44
• /
• 2006

Sandwich structures, which are composed of a thick core between two faces, are commonly used in many engineering applications because they combine high stiffness and strength with low weight. Accordingly, the usage of sandwich structure is very widely applied to the aircraft, the automobile and marine industry, etc., because of these advantages. In this paper, we have investigated the buckling protection of an inner structure plate and the useful corrugated configuration for contact, and the fabrication method of the inner structure plate for large area using the continuous molding process. Also, we have guaranteed the accuracy of the molding process through the micro corrugated mold fabrication and secured the accuracy and analyzed aspect properties of the inner structure plate fabricated for a large area using the partial mold process.

• 한국전기전자재료학회논문지
• /
• 제19권8호
• /
• pp.758-763
• /
• 2006

We has been studied the thin film encapsulation effect for organic light-emitting diodes (OLED). To evaluate the passivation properties of the passivation layer materials, we have carried out the fabrication of green light emitting diodes with ultra violet(UV) light absorbing polymer resin, $SiO_2,\;and\;SiN_x$, respectively. From the measurement results of shrinkage properties according to the exposure time to the atmosphere, we found that $SiN_x$ thin film is the best material for passivation layer. We have investigated the emission efficiency and life time of OLED device using the package structure of $OLED/SiN_x/polymer$ resin/Al/polymer resin. The emission efficiency of this OLED device was 13 lm/W and life time was about 2,000 hours, which reach 95 % of the performance for the OLED encapsulated with metal.