• Food Science and Preservation
• /
• v.20 no.3
• /
• pp.435-439
• /
• 2013

As byproducts of chicken slaughtering, chicken feathers are produced and mostly discarded without proper treatment, which results in serious environment pollution. Therefore, the appropriate treatment and utilization of chicken feathers are needed. In particular, chicken feathers can be used as protein sources for the preparation of protein hydrolysates, considering that chicken feathers have a large amount of proteins. In this study, chicken feather protein hydrolysates were prepared and their iron-binding peptides were isolated. Chicken feather protein was extracted from feathers of slaughtered chicken, and its hydrolysates were prepared via hydrolysis with Flavourzyme for 8 h. Then the chicken feather protein hydrolysates were ultra-filtered to obtain small peptide fractions and fractionated using Q-Sepharose and Sephadex G-15 columns to isolate their iron-binding peptides. Two major fractions were produced from each of the Q-Sepharose ion exchange chromatography and the Sephadex G-15 gel filtration chromatography. Among the fractions, the peptide fraction with a high iron-binding activity level, F12, was isolated. These results suggest that chicken feather protein hydrolysates can be used as iron supplements.

• Journal of Korea Society of Industrial Information Systems
• /
• v.21 no.1
• /
• pp.17-25
• /
• 2016

This paper proposes an ultra-low power design methodology for asynchronous circuits which combines with power switch structure used for reducing leakage current in the synchronous circuits. Compared to existing delay-insensitive asynchronous circuits such as static NCL and semi-static NCL, the proposed methodology provides the leakage power reduction in the NULL mode due to the high Vth of the power switches and the switching power reduction at the switching moment due to the smaller area even though it has a reasonable speed penalty. Therefore, it will become a low power design methodology required for IoT system design placing more value on power than speed. In this paper, the proposed methodology has been evaluated by a $4{\times}4$ multiplier designed using 0.11 um CMOS technology, and the simulation results have been compared to the conventional asynchronous circuits in terms of circuit delay, area, switching power and leakage power.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.5
• /
• pp.659-667
• /
• 2012

2,3-Butanediol (2,3-BDO) is an organic compound with a wide range of industrial applications. Although Escherichia coli is often used for the production of organic compounds, the wild-type E. coli does not contain two essential genes in the 2,3-BDO biosynthesis pathway, and cannot ferment 2,3-BDO. Therefore, a 2,3-BDO biosynthesis mutant strain of Escherichia coli was constructed and cultured. To determine the optimum culture factors for 2,3-BDO production, experiments were conducted under different culture environments ranging from strongly acidic to neutral pH. The extracellular metabolite profiles were obtained using high-performance liquid chromatography (HPLC), and the intracellular metabolite profiles were analyzed by ultra-performance liquid chromatography and quadruple time-of-flight mass spectrometry (UPLC/Q-TOF-MS). Metabolic flux analysis (MFA) was used to integrate these profiles. The metabolite profiles showed that 2,3-BDO production favors an acidic environment (pH 5), whereas cell mass favors a neutral environment. Furthermore, when the pH of the culture fell below 5, both the cell growth and 2,3-BDO production were inhibited.

• Journal of Convergence for Information Technology
• /
• v.10 no.11
• /
• pp.30-39
• /
• 2020

As 5G mobile communication services are provided, efforts are being made to provide various services to users with ultra-low latency. This raises interest in edge computing, which can provide high performance computing services near users instead of cloud computing at the network core. This paper presents an efficient operation and management scheme of a micro data center, which is an essential equipment for realizing edge computing. First, we present the functional structure and deployment plan of edge computing. Next, we present the requirements for the micro data centers for edge computing and the operation and management scheme accordingly. Finally, in order to efficiently manage resources in the micro data centers, we present resource management items to be collected and monitored, and propose a performance indicator to measure the energy efficiency.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.181-186
• /
• 2015

With the rapid growth of semiconductor technologies, small-sized devices with powerful computing abilities are becoming a reality. As this environment has a limit on power supply, NVM storage that has a high density and low power consumption is preferred to HDD or SSD. However, legacy software layers optimized for HDDs should be revisited. Specifically, as storage performance approaches DRAM performance, existing I/O mechanisms and software configurations should be reassessed. This paper explores the challenges and implications of using NVM storage with a broad range of experiments. We measure the performance of a system with NVM storage emulated by DRAM with proper timing parameters and compare it with that of HDD storage environments under various configurations. Our experimental results show that even with storage as fast as DRAM, the performance gain is not large for read operations as current I/O mechanisms do a good job hiding the slow performance of HDD. To assess the potential benefit of fast storage media, we change various I/O configurations and perform experiments to quantify the effects of existing I/O mechanisms such as buffer caching, read-ahead, synchronous I/O, direct I/O, block I/O, and byte-addressable I/O on systems with NVM storage.

• Journal of the Korean Chemical Society
• /
• v.35 no.4
• /
• pp.422-426
• /
• 1991

In order to synthesize high-purity alpha alumina fine powder, the aluminum hydroxide and ammonium aluminum sulfate(alum) precursor were prepared from natural alumino-silicate(halloysite). The thermal decomposition mechenism for both precursors was elucidated by DTA/TG, XRD and IR analysis. The microstructure, specific surface area and purity of ${\alpha}-Al_2O_3$ were characterized by SEM, and BET analysis. The particle size of ${\alpha}-Al_2O_3$ was determined to be ${\phi}$ = 0.1∼0.5 ${\mu}$m. However, the specific surface area for the alum derived ${\alpha}-Al_2O_3$(89.0 m$^2$/g) was extremely higher than that for the aluminum hydroxide derived one(7.3 m$^2$/g).

• Food Science of Animal Resources
• /
• v.22 no.2
• /
• pp.172-178
• /
• 2002

Vitamins are bio-active materials and essential elements in our body but some of them are very low in milt Various vitamin-fortified milks are developed by the help of milk processing technology. However, heat treatments can affect vitamins contents in milk. Total loss of vitamins during the UBT(ultra high temperature) treatment was investigated. UHT treatment caused 60∼70% loss for vitamin C, and 30∼40% loss for vit. D3 and vit. E which are well-known as heat stable materials. On the contrary, degradation of water-soluble vitamins is relatively very low in the capsule-coated state. The capsule could reduce the loss of vitamins by protecting vitamins from the degradation factors such as heat, oxygen, lights etc. The fortification method using capsule can be thought as a new way to reduce the loss of vitamins during milk processing. Further study about heat treatment time and temperature, and capsule coating and materials will be required to minimize the loss of vitamins in milt.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.12
• /
• pp.1112-1115
• /
• 2016

Global Positioning System(GPS) is a useful system used in both civilian and military applications. However, the signal of GPS is susceptible to jamming attacks due to low receive sensitivity, since the signals come from the satellite located at over 20,000 km above the earth. In this paper, we have conducted a preceding research on a non-Foster matching circuit that efficiently matches an electrically ultra-small GPS antenna. Electrically Small Antennas(ESAs) are inefficient radiators and are difficult to match in wideband due to extremely high quality factor. In order to match small GPS antenna in wideband, a non-Foster matching circuit for a small GPS antenna was designed. A negative impedance converter circuit consisting of Linvill's cross-coupled pair transistors was fabricated and its stability was verified by the time-domain stability analysis. In addition, anechoic chamber measurements show that the non-Foster matching circuit for small GPS antenna can lead bore-sight gain improvement by more than 17 dB.

• Journal of Korea Game Society
• /
• v.18 no.1
• /
• pp.115-124
• /
• 2018

Various kinds of tile-based ultra-high resolution display devices have been developed by, for example, constructing display walls using many commodity LCD displays. To represent 3D applications like computer games on these devices, one has to develop 3D applications or develop particular APIs only for representing on these devices. If one can develop a distributed rendering system using legacy 3D APIs such as OpenGL and Direct3D by extending a remote rendering system, commercial computer games can be represented on such display devices without modifying their source codes. The purpose of the paper is to propose a new Dired3D-based distribute rendering system by extending a Direct3D-based remote rendering system and to show its feasibility technically by appling it to a sample Direct3D application and performing a few experimentations.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.765-768
• /
• 2008

Silica fume is a very important gradient in UHPC(Ultra High Performance Concrete) and its amount is normally over 25% of cement(wt.%). But we surely need to comprehend the influence of the amount of silica fume on the UHPC. In this paper, it was investigated how the amount of silica fume influence on the properties such as fluidity, compressive strength, elastic modulus, and flexural strength. Furthermore, it was examined the internal micro structure on UHPC through the test of SEM and MIP. In results, If we properly use silica fume in UHPC, fluidity and strength of UHPC was increased. It can be ascertained through the test of MIP that silica fume effectively increased density of UHPC by posolanic reaction and acting as filler. Especially, In case of Cement to silica fume ratio$0.1{\sim}0.25%$, we can be concluded that UHPC has similar to mechanical property.