• 한국전자통신학회논문지
• /
• 제17권4호
• /
• pp.595-606
• /
• 2022

한국은 단위기 발전기 용량 1.4 GW, 20 GW를 초과하는 몇 개 지역의 대단위 발전단지, 대단위 발전단지에서 발전력을 인출하는 2~3개의 초고압 송전선로, 비수권에서 수도권으로 발전력을 수송하는 6개의 초고압 송전선로 구성 등 대용량 발전, 대규모 송전시스템 등 전통적인 전력계통 시스템의 특징을 가지고 있다. 이런 전력계통 특성으로 신재생에너지 진입 단계는 낮으나 주파수 안정도 문제 등으로 일부 발전기 출력 감발을 시행하고 있으며 향후 신재생에너지 확대 정책으로 전력계통 안정도 유지 문제가 가장 중요한 현안으로 떠오를 전망이다. 태양광, 풍력발전 같은 비관성 인버터 기반 신재생에너지 급증시 독립계통에서 전력계통 안정도를 향상시키는 수단은 Natural 관성 자원인 동기조상기와 가상 관성 자원인 BESS를 계통에 설치하는 것이다. 본 연구에서는 신재생에너지가 계통안정도에 미치는 영향을 분석하고 최저주파수를 유지하기 위한 BESS 효과를 계통 모의를 통하여 분석하였다. 발전제약 용량에 따른 BESS 효과는 최대 122.81%에 도달하는 것을 확인하였다.

• Ocean Systems Engineering
• /
• 제4권3호
• /
• pp.215-241
• /
• 2014

Steel catenary riser (SCR) is a popular/economical solution for the oil/gas production in deep and ultra-deep water. The behavioral characteristics of SCR have a high correlation with the motion of floating production facility at its survival and operational environments. When large motions of surface floaters occur, such as FPSO in 100-yr storm case, they can cause unacceptable negative tension on SCR near TDZ (touch down zone) and the corresponding elastic deflection can be large due to local dynamic buckling. The generation, propagation, and decay of the elastic wave are also affected by SCR and seabed soil interaction effects. The temporary local dynamic buckling vanishes with the recovery of tension on SCR with the upheaval motion of surface floater. Unlike larger-scale, an-order-of-magnitude longer period global buckling driven by heat and pressure variations in subsea pipelines, the sub-critical local dynamic buckling of SCR is motion-driven and short cycled, which, however, can lead to permanent structural damage when the resulting stress is greatly amplified beyond the elastic limit. The phenomenon is extensively investigated in this paper by using the vessel-mooring-riser coupled dynamic analysis program. It is found that the moment of large downward heave motion at the farthest-horizontal-offset position is the most dangerous for the local dynamic buckling.

• 문화기술의 융합
• /
• 제6권3호
• /
• pp.361-367
• /
• 2020

본 논문은 초소형 디바이스 분야에서 사용될 수 있는 배터리가 없는 초저전력 자가발전 협업 신경망 시스템을 제공하는 디바이스에 대하여 설명한다. 본 디바이스는 외부에서 전력을 공급하지 않더라도 동작하며, 다른 신경망과 협업하여 대규모의 신경망 구축이 가능하다. 해당 디바이스는 에너지 하베스팅 모듈을 탑재하고 있어 공간적 제약 없이 어느 곳에서나 자가발전을 이용하여 사용이 가능하며, 디바이스 내부의 신경만을 가지고도 동작할 수 있지만 상황에 따라 네트워크를 통해 대규모의 신경망의 일부로 사용하는 것도 가능하다.

• 진공이야기
• /
• 제3권3호
• /
• pp.15-18
• /
• 2016

In future wearable electronic systems, 3-dimensional (3D) devices have attracted much attention due to their high density integration and low-power functionality. Among 3D devices, gate-all-around (GAA) nanowire transistor provides superior gate controllability, resulting in suppressing short channel effect and other drawbacks in 2D metal-oxide-semiconductor field-effect transistor (MOSFET). Silicon nanowires (SiNWs) are the most promising building block for GAA structure device due to their compatibility with the current Si-based ultra large scale integration (ULSI) technology. Moreover, the theoretical limit for subthreshold swing (SS) of MOSFET is 60 mV/dec at room temperature, which causes the increase in Ioff current. To overcome theoretical limit for the SS, it is crucial that research into new types of device concepts should be performed. In our present studies, we have experimentally demonstrated feedback FET (FBFET) and tunnel FET (TFET) with sub-60 mV/dec based on SiNWs. Also, we fabricated SiNW based complementary TFET (c-TFET) and SiNW complementary metal-oxide-semiconductor (CMOS) inverter. Our research demonstrates the promising potential of SiNW electronic devices for future wearable electronic systems.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1883-1886
• /
• 2005

In this paper, a decoupled dual servo (DDS) stage for ultra-precision scanning system with large working range is introduced. In general, dual servo systems consist of a fine stage for short range and a coarse stage for long range. The proposed DDS also consists of a $XY\theta$ fine stage for handling and carrying workpieces and one axis coarse stage. Its coarse stage consists of air bearing guide system and a coreless linear motor with force ripple. The fine has four voice coil motors(VCM) as its actuator. According to a VCM's nature, there are no mechanical connections between coils and magnetic circuits. Moreover, VCM doesn't have force ripples due to imperfections of commutation components of linear motor systems - currents and flux densities. However, due to the VCM's mechanical constraints the working range of the fine is about $25mm^2$. To break that hurdle, the coarse stage with linear motors is used to move the fine about 500mm. Because of the above reasons, the proposed DDS can achieve higher precision scanning than other stages with only one servo. With MATLAB's Sequential Quadratic Programming (SQP), the VCMs are optimally designed for the highest force under conditions and constraints such as thermal dissipations due to its coil, its size, and so on. And for their movements without any frictions, guide systems of the DDS are composed of air bearings. To get precisely their positions, a linear scale with 5nm resolution are used for the coarse stage's motion and three plane mirror laser interferometers with 5nm for the fine's $XY\theta$ motions. With them, on scanning the two stages have same trajectories. The control algorithm is named Parallel method. The embodied ultra-precision scanning system has sub 100nm following error and in-positioning stability.

• 한국정보통신학회논문지
• /
• 제22권2호
• /
• pp.302-313
• /
• 2018

스마트 기기의 생활화와 증강현실 활용 증가로 실내 위치 인식 시스템의 수요가 급증함에 따라, BLE(Bluetooth Lower Energy) 비콘 그리고 UWB(Ultra Wide Band) 등을 이용한 실내 측위 시스템이 개발되고 있다. 본 논문에서는 BLE Beacon을 기반으로 RSSI(Received Signal Strength Indicator)를 이용한 삼변측량(Trilateration) 기법을 사용하여 측위 플레이트(Plate)를 생성한다. 이에 IMU(Inertial Measurement Unit) 센서의 방향, 속도, 이동거리 등의 데이터를 이용하여 PDR(Pedestrian Dead Reckoning) 측위 좌표를 산출하여 정확도를 보정한다. 또, BLE 비콘(Beacon)의 RSSI를 적용한 플레이트(Plate) 기법과 PDR 기법이 융합된 정밀 실내 측위 알고리즘을 제안한다. 본 논문에서 제시한 알고리즘을 실제 대형 실내 경기장과 공항에 BLE 비콘을 설치, 실험하여 평균 2.2m 의 오차로 65%의 정확도가 개선됨을 검증하였다.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2008년도 학술대회 1부
• /
• pp.45-48
• /
• 2008

박물관이나 전시관에서 많은 관람객들은 전시물에 대한 멀티미디어 정보를 얻기를 원할 뿐만 아니라 특정한 스타일, 작가, 주제별로 관람하고 싶어 한다. 박물관이나 전시관에는 증강 현실을 이용한 선택적 가이드 시스템을 이용하여 글이나 그림, 다국어 음성, 비디오와 같은 전시물에 대한 정보를 관람객에게 제공하며 관람자들의 흥미에 따른 관람 경로를 관람자에게 제공 해준다. 다음 전시물까지 가는 경로의 정보는 증강현실을 이용하거나, 멀티미디어 정보를 이용해서 관람자들에게 제공한다. 이 시스템은 외관적으로는, UMPC(Ultra Mobile PC)와 카메라, 그리고 관성 센서로 구성되어 있다. 처음 이 시스템을 시작하면, 관람자는 자신의 흥미에 맞는 전시물을 메뉴를 선택한다. 그 후, 시스템은 선택된 전시물과 연관된 관람 경로를 설정하고 다음 전시물에 대한 방향과 거리 그리고 어디로 가는지, 어느 방향에 있는지, 얼마나 멀리 있는지 그리고 전시물에 대한 시각적 실마리의 정보가 주어진다. 해당 정보를 이용하여 다음 전시물을 찾고 화면에 표시된 시각적 실마리와 카메라에서 얻어지는 전시물의 영상을 일치시키면 전시물에 대한 정보를 멀티미디어 형태로 보여준다. 사용자들의 간단한 실험을 통해서 이 시스템은 큰 전시실에도 관람자로 하여금 유익하게 관람할 수 있다.

• Journal of Computing Science and Engineering
• /
• 제12권1호
• /
• pp.12-23
• /
• 2018

The Internet of Things (IoT) ecosystem potentially includes heterogeneous devices with different processing mechanisms as well as very complicated network and communication models. Thus, analysis of data associated with adverse conditions is much more complicated. Moreover, mobile things in the IoT lead to dynamic alteration of environments and developments of a dynamic and ultra-large-scale (ULS) environment. Also, IoT and the services provided by that are mostly based on devices with limited resources or things that may not be capable of hosting conventional controls. Finally, the dynamic and heterogeneous and ULS environment of the IoT will lead to the emergence of new security requirements. The conventional preventive and diagnostic security controls cannot sufficiently protect it against increasing complication of threats. The counteractions provided by these methods are mostly dependent on insufficient static data that cannot sufficiently protect systems against sophisticated and dynamically evolved attacks. Accordingly, this paper investigates the current security approaches employed in the IoT architectures. Moreover, we define the dynamic security based on dynamic event analysis, dynamic engineering of new security requirements, context awareness and adaptability, clarify the need for employment of new security mechanism, and delineate further works that need to be conducted to achieve a secure IoT.

• 한국초전도저온공학회지:초전도와저온공학
• /
• 제20권2호
• /
• pp.15-22
• /
• 2018

The present article briefly overviews the plan for a new project on joint technology for HTS wires/cables and describes the development plan for the world's highest field NMR magnet, which is a major development item in the project. For full-fledged social implementation of superconducting devices, high temperature superconducting (HTS) wire is a key technology since they can be cooled by liquid nitrogen and they can generate a super-high magnetic field of >>24 T at liquid helium temperatures. However, one of the major drawbacks of the HTS wires is their availability only in short lengths of a single piece of wire. This necessitates a number of joints being installed in superconducting devices, resulting in a difficult manufacturing process and a large joint resistance. In Japan, a large-scale project has commenced, including two technical demonstration items: (i) Development of superconducting joints between HTS wires, which are used in the world's highest field 1.3 GHz (30.5 T) NMR magnet in persistent current mode; the joints performance is evaluated based on NMR spectra for proteins. (ii) Development of ultra-low resistive joints between DC superconducting feeder cables for railway systems. The project starts a new initiative of next generation super-high field NMR development as well as that of realization of better superconducting power cables.

• Genomics & Informatics
• /
• 제18권1호
• /
• pp.8.1-8.10
• /
• 2020

The explosive growth of next-generation sequencing data has resulted in ultra-large-scale datasets and ensuing computational problems. In Korea, the amount of genomic data has been increasing rapidly in the recent years. Leveraging these big data requires researchers to use large-scale computational resources and analysis pipelines. A promising solution for addressing this computational challenge is cloud computing, where CPUs, memory, storage, and programs are accessible in the form of virtual machines. Here, we present a cloud computing-based system, Bio-Express, that provides user-friendly, cost-effective analysis of massive genomic datasets. Bio-Express is loaded with predefined multi-omics data analysis pipelines, which are divided into genome, transcriptome, epigenome, and metagenome pipelines. Users can employ predefined pipelines or create a new pipeline for analyzing their own omics data. We also developed several web-based services for facilitating downstream analysis of genome data. Bio-Express web service is freely available at https://www. bioexpress.re.kr/.