• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.4
• /
• pp.521-533
• /
• 2012

Interest in application of ultraviolet light technology for primary disinfection that used for the treatment of water for consumption and wastewater has increased significantly in recent years. Analysis of these systems has been carried out using Computational Fluid Dynamics (CFD) procedure. It offers advantages over other techniques in specific circumstances. CFD has emerged as a powerful tool to aid design of a UV reactor by providing the UV dose delivered by the proposed reactor design and allowing engineers to evaluate alternative designs in much less time and at a reasonable cost. In this study, five different configurations of the apparatus depending on the location of the exit are evaluated in terms of maximum dose, minimum dose, flow patterns, particle tracks and transient dose. The configuration 3 results have higher minimum UV dose value and uniform particle distribution of the UV dose on the outlet than other's.

• Journal of the Korean Society of Safety
• /
• v.22 no.1 s.79
• /
• pp.24-29
• /
• 2007

The effectiveness of a UV(ultra violet) disinfection system depends on the characteristics of the waste water, flow conditions, the intensity of UV radiation, the amount of time the microorganisms are exposed to the radiation, and the reactor configuration. The wast water flow conditions are important factors in the design of UV disinfection system from the point of enhancement view of UV disinfection. The turbulent energy intensity in the wake by the vortex shedding are effective for UV radiation. Therewith the effectiveness of vortex generator is considered as a enhancement of UV disinfection. The experimental results presented give important evidences and explain that it is possible to predict UV disinfection performance based on flow experiments. An experimental investigation of two types of the vortex generator is presented. The qualitative and quantitative evaluations of the wake are made by flow visualization using smoke wire method and the measurement of vortex frequencies in the wind tunnel. From the experiment, following results were obtained that the delta wing type vortex generator is more effective than circular type because of the higher vortex frequencies and the smaller drag.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.1
• /
• pp.151-155
• /
• 2007

A compact discharge plasma system with a photocatalyst has been proposed and investigated experimentally for application to air conditioners. It was found that there was intense ultra violet radiation with high energy of 3.2 eV from the corona discharge due to the DC-biased pulse voltage applied on a wire. An electrophotochemical reaction took place apparently on the surfaces of the photocatalyst of $TiO_2$ irradiated ultra violet front the discharge plasma in the proposed plasma system. The proposed discharge plasma system with the photocatalyst of $TiO_2$ showed very high removal efficiency of VOCs by tile additional electrophotochemical reactions on the photocatalyst. The proposed discharge plasma system also showed very high removal efficiency of particles such as smokes, suspended bacteria, and pollen and mite allergens by the electrostatic precipitation part. This type of corona discharge plasma system with a photocatalyst can be used as an effective means of removing both indoor pollutant gases and particles including suspended allergens.

• Journal of the Korean Geosynthetics Society
• /
• v.2 no.3
• /
• pp.19-24
• /
• 2003

Long-term performance of smooth and textured type HDPE geomembranes which were used to the liner and slope systems of waste landfills was examined. Artificial surface defects were added to the surface of geomembranes by scratch addition apparatus specially designed. The mechanical and frictional properties, chemical and ultra violet light resistances and oxidative induction time(OIT) of geomembranes were examined for the cases of defective/non-defective surfaces. Frictional properties of textured type geomembranes showed more excellent than those of smooth type geomembranes. Finally, it was known that the long-term performance of non-defective and textured geomembranes was better than that of defective geomembranes through chemical and UV resistance and OIT tests etc.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.6
• /
• pp.1602-1613
• /
• 2016

Since Ballast Water Management Convention has been adopted, Ballast Water Management Convention is not effected yet. This convention will only enter into force 12 months after its ratification by 30 states, collectively representing 35% of world merchant shipping tonnnage. Morocco, Indonesia and Ghana have ratified this convention during last 29th IMO Assembly meeting which was held in November 2015. In 2016, Belgium, Fiji, Saint Lucia and Peru have become the latest countries to ratify the convention. As of now, 51 states and 34.87% combined merchant fleets are being calculated. BWM convention will be applied to not only new ships but also, existing ships after it is effected. Thus, existing vessel will be retrofitted a Ballast Water Treatment System according to D-2 Requirement until first IOPP nenewal survey after date of entry into force of the convention. Currently, about 65 BWTSs certified by Administration will be reported to IMO, even type of BWTSs is very various. Thus, a risk of each BWTS can be existed, and this existed risk can be also effected to ship's crew safety and protection of ship's own property. Therefore, we have evaluated a risk assessment for an existing vessel retrofitting an ultra violet type Ballast Water Treatment System which is mostly developed in the world. And we described the procedure of selecting a sample vessel, consequently, bulk carrier is selected because this vessel kind is mostly charged in the world. Especially, DWT 175K size is selected. Risk Assessment is using a HAZID and HAZOP method, evaluation method is referred to IMO Document "Considerated test of the Guidelines for Formal Safety Assessment (FSA) for use in the IMO rule-marking process(MSC/Circ.1203-MEPC/Circ.392)". The Risk Assessment Section is decided to 3 Nodes, Consequently, total risks have evaluated 51 items.

• Current Optics and Photonics
• /
• v.6 no.4
• /
• pp.375-380
• /
• 2022

We demonstrate two types of light field displays based on waveguide grating coupler arrays: a line beam type and a point source type. Ultra violet imprinting of an array of diffractive nanograting cells on the top surface of a 50-㎛-thin slab waveguide can deliver a line beam or a point beam to a multidirectional light field out of the waveguide slab. By controlling the grating vectors of the nanograting cells, the waveguide modes are externally coupled to specific viewing angles to create a multidirectional light field display. Nanograting cells with periods of 300 nm-518 nm and slanted angles of -8.5°~+8.5° are fabricated by two-beam interference lithography on a 40 mm × 40 mm slab waveguide for seven different viewpoints. It is expected that it will be possible to realize a very thin and flexible panel that shows multidirectional light field images through the waveguide-type diffraction display.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.5
• /
• pp.675-681
• /
• 2011

In this paper, we dealt with the design and fabrication of a medium pressure ultra-violet (UV) lamp and a magnetic ballast which are main components for ballast water treatment systems (BWTS). To acquire an optimal discharge condition of UV lamp, electrical and optical characteristics depending on the argon gas volume and the amount of mercury were experimentally analyzed. Rated voltage, current and power consumption of a prototype lamp were 490 [V], 8.6 [A] and 4.0 [kW], respectively. UV intensity of the lamp was 15 [%] higher than that of an equivalent lamp which is used in a BWTS. The magnetic ballast was designed in a UI core type through theoretical analysis and simulation. The open voltage and the rated power consumption of the ballast were 920 [V] and 8.5 [kVA] respectively. The disinfection efficacy which is carried out in a BWTS equipped with the UV lamp and magnetic ballast was over 99.99 [%], and this satisfy the IMO regulations.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.23-23
• /
• 2003

GaN-related semiconductors are of great technological importance for the fabrication of optoelectronic devices, such as blue and ultra violet light emitting diodes (LEDs), laser diodes, and photo-detectors. One of the most important applications of GaN-based LEDs is solid-state lighting, which could replace incandescent bulbs and ultimately fluorescent lamps. For solid-state lighting applications, the achievement of high extraction efficiency in LED structures is essential. For flip-chip LEDs (FCLEDS), the formation of low resistance and high reflective p-GaN contact is crucial. So far, a wide variety of different methods have been employed to improve the ohmic properties of p-type contacts to GaN. For example, surface treatments using different chemical solutions have been successfully used to produce high-quality ohmic contacts, Metallization schemes, such as Ta/Ti contacts to p-GaN, were also investigated. For these contacts, the removal of hydrogen atoms from the Mg atoms doped n the GaN was argued to be responsible for low contact resistances.

• Journal of Environmental Science International
• /
• v.13 no.6
• /
• pp.599-603
• /
• 2004

In a batch reactor, the characteristics of photocatalytic degradation of brilliant blue FCF in titanium dioxide suspension was studied under the irradiation of ultra-violet ray. Photocatalytic degradation in anatase type of TiO$_2$ was more effective than in rutile type of $TiO_2$ below the dosage of 5g. The degradation rate was slightly increased with decreasing initial pH of brilliant blue FCF aqueous solution, but rapidly increased with the addition of oxidant. Potassium bromate acted as more effective oxidant than ammonium persulfate. The photocatalytic degradation rate of brilliant blue FCF was pseudo-first order with rate constants of 0.012, 0.006 and $0.003min^{-1}$ at initial pH 3.1, 5.2 and 7.1 of brilliant blue FCF solution, respectively.

• Journal of Environmental Science International
• /
• v.12 no.3
• /
• pp.319-324
• /
• 2003

The characteristics of photocatalytic decomposition of dye waste water by titanium dioxide was studied in a batch reactor under constant strength of ultra-violet ray. The decomposition rate of methyl orange by TiO$_2$ was pseudo-first order, anatase type TiO$_2$ was more effective than rutile type below the dosage of 5g. The decomposition rate was increased with decreasing initial pH, increasing reaction temperature and oxidant concentration. The decomposition rate of water soluble dyes was decreased in order of rhodamine B>eosin Y>methyl orange.