• Journal of the International Relations & Interdisciplinary Education
• /
• v.1 no.2
• /
• pp.1-11
• /
• 2021

The purpose of this study is to inspect the case of university convergence education on elderly education. The Center for Academic Continuing Education (ZAWiW) at Ulm University in Germany aims to inquiry the diversity and differentiation of university and related institutions for senior education by analyzing the linkages between various major areas related to the subject of the elderly and cooperation models between generations. Various topics related to research and life in the elderly are being conducted with a focus on the participation of elderly learners. Through seasonal academy and Ulm 3rd Generation University, connection between regions and universities and interdisciplinary convergence are being actively provided. It can lead to a differentiated strategy of the university for the education of the elderly.

• Journal of Gastric Cancer
• /
• v.15 no.1
• /
• pp.10-18
• /
• 2015

The purpose of this study was to determine if international guidelines differ in their recommendations concerning additive therapy for advanced, but potentially curable, gastric cancer. A systematic search of the English and German literature was conducted in the databases Medline, Cochrane Database, Embase, and PubMed. The search terms used were 'guidelines gastric cancer,' 'guidelines stomach cancer,' and 'Leitlinien Magenkarzinom.' Six different guidelines published after January 1, 2010, in which the tumors were classified according to the seventh edition of the TNM system (2010), were identified. Although the examined guidelines were based on the same study results, their recommendations concerning accompanying therapy for gastric cancer differ considerably. While perioperative chemotherapy is recommended in Germany, Great Britain, and large parts of Europe, postoperative adjuvant radiochemotherapy or perioperative chemotherapy is recommended in the USA and Canada. In Japan, postoperative adjuvant chemotherapy is recommended. The results of identical studies were interpreted differently in different countries. Since considerable effort is required for each country to separately test relevant studies for their validity and suitability, an international cooperation could simplify the creation of a common basis for guidelines and contribute to improved comparability of international guidelines.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.27 no.4
• /
• pp.87-109
• /
• 2002

A satisfiability problem in propositional logic is the problem of checking for the existence of a set of truth values of atomic prepositions that renders an input propositional formula true. This paper describes an empirical investigation of a particular integer programming approach, using the set covering model, to solve satisfiability problems. Our satisfiability engine, SETSAT, is a fully integrated, linear programming based, branch and bound method using various symbolic routines for the reduction of the logic formulas. SETSAT has been implemented in the integer programming shell MINTO which, in turn, uses the CPLEX linear programming system. The logic processing routines were written in C and integrated into the MINTO functions. The experiments were conducted on a benchmark set of satisfiability problems that were compiled at the University of Ulm in Germany. The computational results indicate that our approach is competitive with the state of the art.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.4
• /
• pp.437-444
• /
• 2009

The purpose of this study was to evaluate the physical properties of different automixing resin cements and the shear bond strength on dentin. For this study, two self-adhesive automixing resin cement(Rely-X Unicem(3M ESPE, St. Paul, USA), Embrace resin cement(Pulpdent, Oakland, USA)) and one chemical polymerizing resin cement(Resiment Ready-Mix(J.L.Blosser Inc., Liberty Missouri, USA)) were used. To evaluate the physical properties, compressive strength, diametral tensile strength and flexural strength were measured. The specimens were fabricated using Teflon mould according to manufacturers' instructions and stored for 24 hours in an atmosphere of 100% humidity. To evaluate the shear bond strength on dentin, each cements were adhered to buccal dentinal surface of extracted human lower molars in 2mm diameter. Physical properties and shear bond strengths were measured using universal testing machine(Z010, Zwick GmbH, Ulm, Germany) at a crosshead speed of 0.5mm/min. The physical properties and shear bond strength of different automixing resin cements were statistically analyzed and compared between groups using One-way ANOVA test and Schffe post-hoc test at the 95% level of confidence. The result shows that chemical polymerizing automixing resin cement represents the relatively higher physical properties and shear bond strength than self-adhesive automixing resin cements.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.5
• /
• pp.535-543
• /
• 2008

Purpose: The objective of this study was to compare the bonding characteristics of a new self-adhesive resin cement to dentin, which does not require bonding and conditioning procedure of the tooth surface, and conventional resin cement. The effect of phosphoric acid etching prior to application of self-adhesive resin cement on the shear bond strength was also evaluated. Material and methods: Fortyfive non-carious human adult molars extracted within 6 months were embedded in chemically cured acrylic resin. The teeth were ground with a series of SiC-papers ending with 800 grit until the flat dentin surfaces of the teeth were exposed. The teeth were randomly divided into 3 experimental groups. In group 1, self-adhesive resin cement, RelyX Unicem (3M ESPE, Seefeld, Germany) was bonded without any conditioning of teeth. In group 2, RelyX Unicem was bonded to teeth after phosphoric acid etching. For group 3, Syntac Primer (Ivoclar Vivadent AG, Schaan, Liechtenstein) was applied to the teeth before Syntac adhesive (Ivoclar Vivadent AG, Schaan, Liechtenstein) and Helibond (Ivoclar Vivadent AG, Schaan, Liechtenstein) followed by conventional resin cement, Variolink II (Ivoclar Vivadent AG, Schaan, Liechtenstein). To make a shear bond strength test model, a plastic tuble (3 mm diameter, 3 mm height) was applied to the dentin surfaces at a right angle and filled it with respective resin cement, and light-polymerized for 40 seconds. All the specimens were stored in distilled water at $37^{\circ}C$ for 24 hours before test. Universal Testing Machine (Z020, Zwick, Ulm, Germany) at a cross head speed of 1 mm/min was used to evaluate the shear bond strength. The failure sites were inspected under a magnifier and Scanning Electron Microscope. The data was analyzed with One way ANOVA and Scheffe test at ${\alpha}$= 0.05. Results: (1) The shear bond strengths to dentin of RelyX Unicem was not significantly different from those of Variolink II/Syntac. (2) Phosphoric acid etching lowered the shear bond strength of RelyX Unicem significantly. (3) Most of RelyX Unicem and Variolink II showed mixed fractures, while all the specimens of RelyX Unicem with phosphoric acid etching demonstrated adhesive failure between dentin and resin cement. Conclusion: Shear bond strength to dentin of self-adhesive resin cement is not significantly different from conventional resin cement, and phosphoric acid etching decrease the shear bond strength to dentin of self-adhesive resin cement.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.2
• /
• pp.83-94
• /
• 2009

The aim of this study was to investigate the shear bond strength between zirconia ceramic and resin cement according to various surface treatments. The surface of each zirconia ceramic was subjected to one of the following treatments and then bonded Rely X Unicem or Rely X ARC resin cement; (1) Rocatec system and $50{\mu}m$ surface polishing, (2) No treatment and $50{\mu}m$ surface polishing, (3) Rocatec system and $1{\mu}m$ surface polishing, (4) No treatment and $1{\mu}m$ surface polishing. Each of eight bonding group was tested in shear bond strengths by universal testing machine(Z020, Zwick, Ulm, Germany) with crosshead speed of 1mm/min. The results were as follows; 1. Rocatec treatment groups showed greater bonding strengths than No Rocatec groups. There was significant difference of among groups(P<0.001) 2. For Rocatec groups, $50{\mu}m$ surface roughness groups showed greater bonding strengths than $1{\mu}m$ surface roughness groups.(P<0.001) But for No Rocatec groups, There was no significant difference of among groups(P>0.05) 3. Rely X Unicem groups showed greater bonding strengths than Rely X ARC groups. There was significant difference of among groups(P<0.01) Within the conditions of this study, Rocatec treatment was an effective way of increasing zirconia bonds to a resin cement, even in the case of self-adhesive resin cement.