• Korean Journal of Environmental Agriculture
• /
• v.16 no.3
• /
• pp.227-232
• /
• 1997

Visible injury appeared 7 days after ultraviolet-B(UV-B) irradiation, but did not show any significant decline of growth in cucumber plant. However the growth of the first leaves of fertilized plants was suppressed by UV-B irradiation. Especially the most effective growth retardiation appeared when supplied with nitrogen rather than phosphate and potassium. These results suggest that UV-B may play an important role in inhibiting nitrogen metabolism. Therefore we examined the effect of activity of nitrate reductase, and found that the nitrate reductase activity of the first leaves was increased by UV-B irradiation for 7 days and fertilization. We examined the effect of plant hormone on the inhibition of growth in the first leaves. Benzyladenine promoted the growth of discs excised from the first leaves by fertilization and without UV-B, but did not promote the growth of leaf discs from UV-B irradiated plants. We conclude that the UV-B-induced decrease in the growth of the first leaves could be related to reduction in sensitivity to plant hormones.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.7
• /
• pp.5-11
• /
• 2014

Both ultraviolet (UV) and ultrasound (US) systems are used in degrading of organic contaminants and they can thus be applicable simultaneously as an UV/US hybrid system in attempts further to increase the degradation efficiency. The pseudo-first order degradation rate constants with the UV, US and UV/US hybrid irradiation were 2.60, 10.34, and $14.81{\times}10^{-3}min^{-1}$, respectively. It was observed that the synergistic effect of UV/US hybrid system for degrading the bis (2-ethylhexyl) phthalate (DEHP). The highest rate of DEHP degradation was found during UV/US hybrid irradiation and the synergistic effect factor (SEF) was calculated to be 1.15 based on the pseudo-first order degradation rate constants. Results indicate that synergistic effect of UV/US hybrid system is closely correlated to the enhancement of sonochemical reactivity with the UV-US interaction of increasing the formation rate of OHby providing additional $H_2O_2$ production through the pyrolysis of water molecules during UV/US hybrid irradiation.

• Research in Plant Disease
• /
• v.28 no.2
• /
• pp.61-68
• /
• 2022

Powdery mildew and two-spotted spider mite are detrimental to strawberry plants and are controlled with traditional pesticides. To accommodate consumer demand, eco-friendly methods of pest control are required. Strawberries were cultivated (in soil and in a hydroponic system) for two years, and ultraviolet B (UV-B) irradiation was used as an alternative pest control during the harvesting season. Three varieties were grown (Seolhyang, Kingsberry, and Durihyang), and four UV-B lamp/mulch (black, green, and light reflection sheet [LRS]) combinations were used during harvesting: UV-B+black or green mulch, UV-B+black or green+LRS, no UV-B+black or green, and no UV-B+black or green+LRS. In all varieties, powdery mildew was 65% more controlled when UV-B irradiation was used. The adult two-spotted spider mite density was lowest in the UV-B lamp+black or green+LRS treatments. Therefore, UV-B irradiation during the strawberry harvesting season could effectively control powdery mildew and two-spotted spider mite with little side effect on the plants.

• 프린팅코리아
• /
• v.12 no.12
• /
• pp.96-97
• /
• 2013

Air Motion Systems, Inc(대표 Stephen Metcalf)가 개발 공급하고 있는 LED UV램프가 새롬인쇄(대표 장순성)에 국내 1호로 도입됐다. AMS에서 공급하고 있는 LED-UV시스템은 기존의 UV 경화 장치가 전력 소모가 크고 오존이 발생하며 발열이 많아 사용상에 여러 가지 제약이 많았던 것을 획기적으로 개선한 것이 특징이다. AMS의 LED UV램프는 마이크로컨트롤스(대표 조병우)가 아시아 지역을, LH코퍼레이션이 국내를 담당하고 있다.

• Proceedings of the KWS Conference
• /
• 2005.06a
• /
• pp.314-316
• /
• 2005

이 논문에서는 아크 용접시 발생하는 IR신호와 UV호의 상호 관계를 알아보려고 레이저 용접진단에 사용되는 IR-UV 센서 모니터링 시스템을 적용하였다. 그 결과 IR신호 크기는 용접폭에 관련이 있고, 펄스 형태의 UV신호는 IR신호 증가율이 임계값을 넘으면 나타나는 것을 알 수 있다.

• Food Science and Preservation
• /
• v.17 no.3
• /
• pp.425-429
• /
• 2010

Inactivation by UV-C irradiation of Listeria monocytogenes cocktail inoculated on hamburger patties was examined. Hamburger patty samples were inoculated with 6-7 log CFU/mL of L. monocytogenes cocktail, and then exposed to doses of 0, 1, 5, or $10kJ/m^2$ of UV-C light, followed by storage at $4{\pm}1^{\circ}C$ for 7 d. Microbiological evaluation indicated that the populations of L. monocytogenes decreased significantly (p<0.05) as irradiation dose increased. In particular, L. monocytogenes populations decreased by 2.03 log CFU/g after exposure to 10 $kJ/m^2$, compared with control samples. The thiobarbituric acid-reactive substance levels of hamburger patty samples increased during storage, regardless of UV-C irradiation status. These results indicate that UV-C irradiation may be useful in improving the microbial safety of hamburger patties during storage.

• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.2
• /
• pp.139-145
• /
• 2016

Disinfection of microorganisms using UV light is widely used in the field of water supply and wastewater treatment plant, In spite of high germicidal effect and relatively clean by-product, UV disinfection has fundamental defeat that is accumulation of fouling materials at the interface of water and lamp sleeve. Non-contact type of UV photoreactor which can avoid this fouling generation was developed and the experimental performance evaluation of the system was carried out in this study. Log inactivation rate of E. coli was selected as a disinfection index. The concentration of E. coli of second clarifier effluent was $8.2{\times}10^1-8.2{\times}10^3$ colony per mL and was well inactivated by the non-contact type of UV photoreactor. Under the UV intensity condition of $2.1-2.5mW/cm^2$, E. coli removal rate was observed in the range of 54 - 95% when the HRT was increased from 10 to 52 seconds. Experimental results showed that log inactivation of E. coli was proportional to UV dosage and $200mJ/cm^2$ of UV dose is expected for the 2.0 log inactivation of E. coli from the second clarifier effluent. Between the two parameters of UV intensity and contact time which are consist of UV dose, UV intensity was 4 times more effective than contact time.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.5
• /
• pp.643-648
• /
• 2013

In this study, degradation was observed by irradiating UV rays to the polymer insulators which have been widely used in outdoor electric power facilities. For an indoor accelerated UV test, 0.55 w/m2 of UV rays were applied using a xenon-arc method. A UV detection system with 65 ${\phi}mm$ in diameter, 100 mm in length and 1.0 of brightness (F/#) has been designed. Even though efflorescence on the surface of polymer insulators wasn't observed according to the accelerated UV test. UV rays were detected at around 50% and 40% of insulation breakdown in EPDM and silicone-type insulators respectively. As degradation continued because of an indoor accelerated UV test, breakdown voltage with which UV rays can be detected in an early stage decreased as well. A silicone polymer insulator would be severer than EPDM polymer insulator in terms of surface degradation because of UV strength against $V_m/V_{BD}$ was high in silicone polymer insulators. UV strength in silicone-type insulators increased at 1,000 $kJ/m^2$ because contact angle at the intial stage sharply decreased to from $113^{\circ}$ to $92.1^{\circ}$.

• Applied Chemistry for Engineering
• /
• v.16 no.3
• /
• pp.449-455
• /
• 2005

Electron beam (EB) and ultraviolet (UV) curable monomers (AF-1 with mono functionality and AF-2 with tetra functionality) containing hydroxy and acrylate group for anti-fogging coating were synthesized and applied to EB and UV-curable coating systems. The synthesized reactive AF-1 and AF-2 monomers were first formulated into UV-curable system and the optimization of film properties for anti-fogging coating was investigated. The 5:17.5 ratio for AF-1 and AF-2 was found to be the best optimized formulation for anti-fogging coating without destroying the other essential properties such as hardness, solvent resistance, and adhesion. The optimized formulation was applied to the EB-curable system, and EB and UV-curable systems were compared. The results demonstrated that both EB and UV-cured films coated on PC sheet showed excellent anti-fogging properties; however, the EB-cured film exhibited better hardness, adhesion, and water repellent properties than the UV-cured film.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.11
• /
• pp.6464-6471
• /
• 2014

The UV curing method is a popular process for lens molding on a unit wafer. This process, however, has several drawbacks including wafer adhesion during the ejection process after curing, errors in lens shape and wafer warpage due to material shrinkage during the curing process, and lens centering errors on both sides of a wafer. Among these, the lens shape error and warpage are influenced directly by the UV curing process due to factors including the UV radiation uniformity, the degree of cure according to UV intensity, and the shrinkage characteristics of the material. Therefore, a theory is needed not only to understand the change in the material characteristics, such as the shrinkage rate due to the curing reaction, but also to establish a model. In addition, an analysis system is needed to realize the model. This study proposes a new analysis method for the wafer lens molding process by Comsol modeling. This method was verified by comparing the results with those of the actual process.