• Korean Chemical Engineering Research
• /
• 제54권3호
• /
• pp.387-393
• /
• 2016

불소가 함유된 폴리우레탄 코팅 용액을 과불화 알코올, toluene diisocyanate와 polycarbonate diol을 출발물질로 사용하여 합성하였다. 이렇게 합성된 불소 함유 폴리우레탄 코팅 용액을 기재인 PC 위에 스핀 코팅 후 $120^{\circ}C$에서 열경화시켜 코팅 필름을 제조하였다. 제조된 코팅 필름의 물성을 FT-IR spectroscopy, UV-visible spectrometer, 접촉각 측정기와 연필경도 측정기를 사용하여 분석하였다. 과불화 알코올의 첨가는 코팅 필름의 발수성을 향상시켜, 물 접촉각을 $81^{\circ}C$에서 $111^{\circ}C$로 증가시켰다. 그러나 코팅 필름의 연필경도는 과불화 알코올의 첨가에도 불구하고 H로 일정하였다.

• 한국재료학회지
• /
• 제11권7호
• /
• pp.550-555
• /
• 2001

rf PECVB법을 이용하여 붕규산 유리 기판 위에 diamond like carbon(DLC) 박막을 증착하였다. 메탄(CH$_4$)-수소(H$_2$) 혼합 가스를 전구체 가스로 사용하였다. DLC 박막의 형상, 구조 및 광학적 특성은 SEM, 라만 및 UV 스펙트럼으로 분석하였다. 증착 속도는 혼합 가스의 수소 농도에 따라 증가하다가, 혼합 가스 유량이 25 sccm 이상에서는 일정하게 되었다. UV스펙트럼으로 계산한 박막의 optical band gap은 증착 시간과 DC serf bias의 증가에 따라 감소하는 경향을 나타냈으나, 수소함량에 의해서는 거의 영향이 없었다. 박막의 투과율에 가장 큰 영향을 미치는 인자는, 특히 자외선 영역과 가시광선 영역에서, bias 전압이었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.120-120
• /
• 2009

Ga doped ZnO (GZO) transparent conductive films were deposited on the glass substrates at room temperature by facing target sputtering (FTS) method. The sputtering targets were 100 mm diameter disks of GZO($Ga_2O_3$ 3.w.t%) and Zn metal. The GZO thin films were deposited as a various $PO_2$ (oxygen gas content). Base pressure was $2{\times}10^{-6}torr$, and a working pressure was 1mTorr. The properties of thin films on the electrical and optical properties of the deposited films were investigated by using a four-point probe (Chang-min), a Hall Effect measurement (Ecopia) and an UV/VIS spectrometer (HP). The minimum resistivity of film was $6.5{\times}10^{-4}[{\Omega}-cm]$ and the average transmittance of over 80% was seen in the visible range

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.138-138
• /
• 2009

Al, Ga and In doped ZnO thin film were prepared by faing targets sputtering as a function of oxygen gas contents at R.T. Base pressure was $2{\times}10^{-6}torr$, and working pressure was 1mTorr. The properties of thin films on the electrical and optical properties of the deposited films were investigated by using a four-point probe (Chang-min), a Hall Effect measurement (Ecopia) and an UV/VIS spectrometer (HP). The minimum resistivities of AZO, GZO and IZO thin film were $6.5{times}10^{-4}[{\Omega}-cm],5.5{\times}10^{-4}[{\Omega}-cm]$ and $4.29{\times}10^{-4}[{\Omega}-cm]$. The average transmittance of over 80% was seen in the visible range.

• 한국응용과학기술학회지
• /
• 제22권3호
• /
• pp.228-233
• /
• 2005

Langmuir-Blodgett(LB) technique can speak the best candidate of the future molecular electronic devices. But, precursor as molecular ultrathin film devices require the bulk property that are influenced by the molecular orientation. So, this device is one of current interest in molecular electronic device development of new materials. In this study, quantitative evaluation of molecular orientation in LB films of polyamic acid alkylamine salt was performed analysis experiment comparing the absorption or transmission intensity of the FT-IR spectrometer and reflection or absorption spectra with UV-visible absorption spectra. It could find that the polar angle(${\theta}$) of the dipole moment appears in about $68^{\circ}$ and the tilting angle of the alkyl chain is about $11.5^{\circ}$.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.115.2-115.2
• /
• 2011

실리콘 박막 태양전지는 기판의 표면형상에 따라 셀 내부에서 이동하는 빛의 광학적인 경로가 크게 증가하여 변환효율의 향상을 기대할 수 있다. 금속 기판은 다양한 표면형상으로 가공이 용이하고 강도와 인성이 우수하며 가격이 저렴하여 실리콘 박막 태양전지의 기판재로 활발한 연구가 진행되고 있다. 본 연구에서는 금속 기판의 표면형상이 반사특성에 미치는 영향을 알아보고자 하였다. 금속 기판재의 표면형상은 기계적 연마 방식을 응용하여 다양하게 제작하였다. 반사특성을 보기 위하여 UV-visible spectrometer를 사용하여 총 반사율과 산란 반사율을 측정하였고, 표면 형상에 따른 Fe-Ni 기판과 Ag 후면반사막의 반사 특성이 태양전지 셀 내부의 광포획의 증가에 어떠한 영향을 주는지 비교 분석하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.290-291
• /
• 2006

We prepared the multilayer with Al doped ZnO (AZO)/Ag/AZO structure. The multilayer were deposited with various thickness of Ag layer on glass substrates at room temperature by using facing targets sputtering (FTS) method. To investigate the electrical, optical and structural properties, we used Hall Effect measurement system, four-point probes. UV-VIS spectrometer with a wavelength of 300 - 100nm, X-ray Diffractometer(XRD) and scanning electron microscopy (SEM). We obtained multilayer thin film with the low resistivity $5,9{\times}10^{-5}{\Omega}cm$ and the average transmittance of 86% m the visible range (400 - 800nm).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.336-336
• /
• 2010

Ga doped ZnO (GZO) transparent conductive films were deposited on the glass substrates at room temperature by facing target sputtering (FTS) method. The sputtering targets were 100 mm diameter disks of GZO($Ga_2O_3$ 3.w.t%) and Zn metal. The GZO thin films were deposited as a various $PO_2$ (oxygen gas content). Base pressure was $2{\times}10^{-6}$torr, and a working pressure was 1mTorr. The properties of thin films on the electrical and optical properties of the deposited films were investigated by using a four-point probe, a Hall Effect measurement and an UV/VIS spectrometer. The minimum resistivity of film was $6.5{\times}10^{-4}$[$\Omega$-cm] and the average transmittance of over 80% was seen in the visible range.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.503-504
• /
• 2008

ZnO thin films were deposited on glass and plastic substrates at different $Ar/O_2$ gas flow ratio in RF magnetron sputtering system. To investigate structural and optical properties of ZnO thin films, X-ray Diffactometer and UV-Vis Spectrometer were performed, respectively. The obtained films showed a preferred orientation the c-axis perpendicular to the substrate and transmittance above 80 % in visible range.

• 한국식품위생안전성학회지
• /
• 제11권2호
• /
• pp.123-127
• /
• 1996

The isolation and chemical characterization of yellow food pigments from Monascus purpureus were studied according to the compositions of media. Monacus yellow pigments were isolated and purified by solvent fractionation, silicagel column chromatography, TLC and HPLC. The retention time of Monascus yellow pigments isolated by HPLC was respectively 5 min(I) and 9 min(II) as the yeast malt extract agar(YMA) media and was respectively 4.6 min(III), 5 min(I) 5.7 min(IV), 8.3 min(V), 9 min(II) and 10.7 min(Ⅵ) at the malt extract agar(MEA) media. The structure of monascin(I), ankaflavin(II), 6,11-dihydrorubropunctatin(III), 6,11-dihydromonascorubrin(V) and unknown compounds(IV,Ⅵ) was elucidated by EI-Mass, H and C NMR, UV-visible spectrometer. Therefore, it was suggested that 6,11-dihydrorubropunctatin(III) and 6,11-dihydromonascorubrin(V) are new intermediates of Monascus yellow pigments.