• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.192-192
• /
• 2010

Transparent Conductive Oxides (TCO) 박막은 지금 까지 산업 전반에 걸쳐 많이 응용되어 사용되어지는 박막 중에 하나이다. 그대표적인 산업은 디스플레이 산업 중 평면디스플레이 산업에서 투명 전극으로 사용하는 LCD 및 터치패널에 사용되는 전극으로 사용되어져 왔다. 현재에는 솔라 셀의 전극 및 기판으로서의 응용이 많이 연구되어지고 있다. 이와 같은, 산업에서 사용되는 투명전극 재료는 낮은 전기적 특성 및 애칭특성이 우수하고 높은 광 투과도를 필요로 하고 있으며, 이러한 특성을 모두 만족하며 가장 우수한 물성을 나타내는 물질이 (Indium Tin Oxide) film이다. 하지만 Indium의 고갈과 희소성에 따른 고가라는 점의 문제로 인해 대체재료로써 부상되고 있는 ZnO의 연구가 활발히 진행되고 있다. 본 연구에서는 투명 전도성 산화물인 ZnO박막과 Al이 도핑된 AZO박막을 저온공정이 가능한 대향 타겟식 스퍼터링 방법(FTS)을 이용하여 산소가스 분압과 Al타겟에 인가되는 Current에 따른 박막의 전기적, 광학적 특성을 파악하여 적용여부에 대해 조사하였다. ZnO박막의 결정성은 유입되는 산소가스의 유량에 따라 증가하며 일정 영역이상에서는 감소하였다. 산소가스 유량이 1.2 sccm일 때 가장 높은 결정성을 얻었다. 또한 산소가스 유량을 1.2 sccm으로 고정시킨 후 Al타겟에 인가되는 Current에 변화를 주었을 때 0.5A에서 가장 낮은 비저항을 얻었다. ZnO박막의 미세구조는 Xray-diffraction method를 이용하여 측정하였고, 산소 분압에 따른 표면조도 분석을 위해 AFM을 사용하였고 Zn와 Oxide bonding의 화학적 분석을 위해 XPS를 이용하여 분석하였다. 또한 전기적 특성은 Hall measurement, 광 투과도는 UV-VIS Spectrometer를 이용하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.191.1-191.1
• /
• 2013

현재 산업계 전반적으로 사용되고 있는 박막형 태양전지 투명 전도막의 재료로는 ITO 와 Al, In, Ga, B, Si, F 등으로 도핑된 ZnO 박막이 사용되고 있으며, 그 중에서도 Al 이 도핑된 ZnO 박막은 넓은 밴드갭을 가진 n-type 반도체로서, 적외선 및 가시광 영역에서의 높은 투과성과 우수한 전도성을 가지며, 고온에서 안정된 전기적 특성, 낮은 원가 등의 장점을 지녀 그 응용 연구가 활발히 이루어지고 있다 [1]. 본 연구에서는 RF magnetron Sputter 법을 이용하여 Flexible 기판 위에 AZO 박막을 증착하였다. 실험변수로는 RF power, Pressure등을 이용하였고, 최적조건에서의 박막의 투과도는 90%이상, 면저항은 30 ${\Omega}/{\square}$ 이하를 나타내었다. 그리고 (주)인포비온에서 원천기술을 갖고있는 EBA technology를 이용하여 후처리 하여 전기적, 광학적, 구조적인 특성의 변화를 관찰하였다. AZO 박막의 두께를 측정하기 위해 ${\alpha}-step$과 SEM을 이용하였고, 투과도는 UV-Vis spectrometer를 사용하여 박막의 투과도 변화를 관찰 하였다. 전기적인 특성은 4-Point probe를 이용하여 측정하였다. 또한, 박막의 결정성과 거칠기의 변화는 XRD(X-ray Diffraction)와 원자간력현미경(Atomic Force Microscope; AFM) 을 이용하여 측정하였으며, 전기 광학적 특성 변화는 Figure Of Merit(FOM) 수치로 분석하였다. 본 연구에서 AZO 박막의 특성은 EBA 조사 후 특성의 향상이 이루어지는 것을 관찰할 수 있었다.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.12
• /
• pp.1419-1424
• /
• 2011

Nanoimprint lithography is a next generation lithography technology, which enables to fabricate nano to micron-scale patterns through simple and low cost process. Nanoimprint lithography has been applied in various industry fields such as light emitting diodes, solar cells and display. Functional patterns, including anti-reflection moth-eye pattern, photonic crystal pattern, fabricated by nanoimprint lithography are used to improve overall efficiency of devices in that fields. For these reasons, in this study, sub-micron-scaled functional patterns were directly fabricated on Si and glass substrates by thermal imprinting process using ZnO nano-particles dispersion resin. Through the thermal imprinting process, arrays of sub-micron-scaled pillar and hole patterns were successfully fabricated on the Si and glass substrates. And then, the topography, components and optical property of the imprinted ZnO nano-particles/resin patterns are characterized by Scanning Electron Microscope, Energy-dispersive X-ray spectroscopy and UV-vis spectrometer, respectively.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.4
• /
• pp.48-56
• /
• 2011

Black cobalt solar selective coatings were prepared by thermal oxidation of electroplated cobalt metal on copper and nickel substrates. The optical properties and structure of the black cobalt selective coating for solar energy utilizations were characterized by glow discharge spectrometry (GDS), ultraviolet-visible-near infrared (UV-VIS-NIR) spectrometer, atom force microscopy(AFM) and X-ray photoelectron spectroscopy(XPS). The optical properties of optimum black cobalt selective coating prepared on copper substrate were a solar absorptance of 0.82 and a thermal emittance of 0.01. From the GDS depth profile analysis of these coatings, the concentration of cobalt particles near the interface was higher than at the surface, but oxygen concentration at the surface was higher than at the interface. These results suggest that the selective absorption was dominated by this chemical composition variation in the coating. The surface of this film exhibited morphology with root-mean-square(rms) roughness of about 144.3nm. XPS measurements data showed that several phases of Co coexist($Co_3O_4$,CoO) in the film.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.3
• /
• pp.41-45
• /
• 2010

The ZnO thin films doped with Ga(GZO) and both Ga and Ge(GZO:Ge) were deposited on glass substrate by using RF sputtering system respectively. Structural, morphological and optical properties of the films deposited in the same condition were investigated. Structural properties of the films were investigated by Field Emission Scanning Electron Microscopy, FE-SEM images and X-ray diffraction, XRD analysis. These studies showed shape of films' surface and direction of film growth respectively. It's showed that all films were deposited by vertical orientation strongly. It can be confirmed that all dopants of targets were included in deposited films by results of EDX analysis. UV-Vis spectrometer results showed that all samples had highly transparent characteristics in visible region and have similar 3.28~3.31 eV band gap. It was found that existence of all dopants by EDX analysis. Morphology and roughness of surface of each film were clearly shown by Atomic Force Microscopy, AFM images. It was found in this research that film doped with Ge more dense and stable with hardly any difference in gap energy compared to ZnO films.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.2
• /
• pp.71-75
• /
• 2018

In this study, we prepared OLED cell with ITO (Indium Tin Oxide) films grown on the glass substrate by facing targets sputtering. Before fabrication of OLED cells, we investigated properties of ITO films deposited at various sputtering conditions. To investigate properties of as-prepared films, we employed four-point probe, UV-VIS spectrometer, X-ray diffractometer (XRD), field emission scanning electron microscopy (FE-SEM), hall-effect measurement. As a results, as-prepared ITO films have high transmittance of over 85 % in the visible range (300-800 nm) and a resistivity of under $10^{-4}$ (${\Omega}-cm$). Their resistivity increased as a function of oxygen gas flow and substrate temperature. OLED cell with ITO films were fabricated by thermal evpoeartor. Properties of OLEDs cell referring to properties of ITO films.

• Journal of Surface Science and Engineering
• /
• v.55 no.4
• /
• pp.215-221
• /
• 2022

In the present work, copper oxide thin films were formed by heat-treatment method with different temperatures and atmosphere, e.g., at 200 ~ 400 ℃; in air and Ar atmosphere. The morphological, electrical and optical properties of the thermally fabricated Cu oxide films were analyzed by SEM, XRD, and UV-VIS spectrometer. Thereafter, photoelectrochemical properties of the thermal copper oxide films were analyzed under solar light (AM 1.5, 100 mW/cm²). Conclusively, the highest photocurrent was obtained with Cu₂O formed under the optimum annealing condition at 300 ℃ in air atmosphere. In addition, EIS results of Cu oxide formed in air atmosphere showed relatively low resistance and long electron life-time compared with Cu Oxide fabricated in Ar atmosphere at the same temperature. This is because heat-treatment in Ar atmosphere could not form Cu₂O due to lack of oxygen, and thermally formed CuO at high temperature suppressed stability and conductivity of the Cu oxide.

• Journal of Surface Science and Engineering
• /
• v.57 no.3
• /
• pp.179-191
• /
• 2024

This study focuses on improving the photocatalytic degradation efficiency by synthesizing a TiO₂/WO₃ composite. Given the environmental significance of photocatalysis and the limitations posed by TiO₂'s large bandgap and high electron recombination rate, we explored doping, surface modification, and synthesis strategies. The composite was created using a ball mill process and heat treatment, analyzed with field emission scanning electron microscope, high resolution X-ray diffraction, Raman microscope, and UV-Vis/NIR spectrometer to examine its morphology, composition and absorbance. We found that incorporating WO₃ into the TiO₂ lattice forms a W_x-Ti_1-x-O₂ solution, with optimal WO₃ content reducing the band gap and enhancing sterilization efficiency by inhibiting the anatasese to rutile transition. This contributes to the field by offering a way to overcome TiO₂'s limitations and improve photocatalytic performance.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.441-442
• /
• 2012

SnNb2O6 nanoplates were prepared by a solvothermal synthesis with water and ethanol mixed solvent. For improvement of their properties, as-prepared SnNb2O6 nanoplates also were calcined. The prepared powder was characterized by X-ray diffraction (XRD), field emission scanning electron microscope (FESEM), Transmission electron microscope (TEM), UV-vis spectroscopy, Raman spectrometer, Brunauer-Emmett-Teller (BET). The calcined nanoplates have a smaller surface area than the as-prepared nanoplates have. Nevertheless, in the case of the optical absorption properties, the calcined nanoplates could absorb more photon energy, due to their smaller band gaps. The Raman analysis revealed that the Nb-O bond length in the calcined nanoplates was longer than that in the as-prepared nanoplate. The higher optical absorption capability of the calcined nanoplates was attributed to the local structure variation within them. Furthermore the high crystallinity of the calcined nanoplates is effective in improving the generation of charge carriers. So, It was found that the calcined nanoplates exhibited superior photocatalytic activity for the evolution of H2 from an aqueous methanol solution than the as-prepared nanoplates under UV and visible irradiation. Therefore, the enhanced photocatalytic activity of the calcined nanoplate powder for H2 evolution was mainly attributed to its high crystallinity and improved optical absorption property resulting from the variation of the crystal structure.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.124.1-124.1
• /
• 2015

$TiO_2$는 화학적으로 안정하며, 인체에 무해하고, 살균특성 및 각종 유기물에 효과적인 분해력, 안정성 및 내구성들의 장점으로 인해 널리 사용되는 광촉매제로 알려져 있다. 최근 $TiO_2$는 유리에 접촉되는 물방울의 표면장력을 크게 하여 접촉각을 10도 이하로 유지시켜줌으로써 비가 오거나 청소를 위해 살수를 할 때 유리면에 얇은 수막을 형성시켜 광촉매 기능으로 분해된 유기질의 오염물질 및 유리표면과의 결합력이 낮아진 무기질의 오염원을 쉽게 제거해 주는 특성들로 인해 오염방지 코팅제로 많이 활용되고 있다. 그러나, $TiO_2$는 빛이 조사될 경우에만 친수특성을 나타낸다는 단점들이 있어 본 연구에서는 $TiO_2$에 $SnO_2$를 혼합한 박막을 증착하여 신뢰성을 향상시키고자 하였다. 또한 기존 $TiO_2$ 코팅막들이 주로 spray 또는 blade 방식으로 코팅되어 코팅된 막이 낮은 균일성과 내구성을 가지므로 본 연구에서는 RF-Magnetron Sputtering 방법을 이용하여 유리 기판위에 $(TiO_2)50(SnO_2)50$ 박막을 증착하였다. 제작된 박막은 유리에 적용될 경우를 감안해 광학적 특성을 분석하기 위해 Uv-vis Spectrometer 장비를 이용하여 투과율을 분석하였으며, $SnO_2$ 혼합에 따른 구조적 특성으로 주사전자현미경(Scanning Electric Microscope, SEM)을 통하여 박막의 결정상을 분석하였으며, 주사탐침현미경(Atomic Force Microscope, AFM)을 사용하여 표면 거칠기를 관찰하였다. 또한 광촉매 특성을 통한 친수성을 알아보기 위해 UV 램프를 사용한 후 접촉각을 측정하였다.