• Advances in nano research
• /
• 제10권2호
• /
• pp.191-210
• /
• 2021

To compare the antifungal effect of two nanomaterials (NMs), nanoparticles of zinc oxide were synthesized by a chemical route and zinc oxide-based nanobiohybrids were obtained using green synthesis in an extract of garlic (Allium sativum). The techniques of X-Ray Diffraction (XRD), Infrared (IR) and Ultraviolet Visible (UV-Vis) absorption spectroscopies and Scanning (SEM) and Transmission Electron Microscopies (TEM) were used to determine the characteristics of the nanomaterials synthesized. The results showed that the samples obtained were of nanometric size (< 100 nm). To compare their antifungal capacity, their effect on Cercospora sp. was evaluated. Test results showed that both nanomaterials had an antifungal capacity. The nanobiohybrids (green route) gave an inhibition of fungal growth of ~72.4% while with the ZnO-NPs (chemical route), inhibition was ~87.1%. Microstructural studies using High Resolution Optical Microscopy (HROM) and ultra-structural analysis using TEM carried out on the treated strains demonstrated the effect of the nanofungicides on the vegetative and reproductive structures, as well as on their cell wall. To account for the antifungal effect presented by ZnO-NPs and ZnO nanobiohybrids on the fungi tested, effects reported in the literature related to the action of nanomaterials on biological entities were considered. Specifically, we discuss the electrical interaction of the ZnO-NPs with the cell membrane and the biomolecules (proteins) present in the fungi, taking into account the n-type nature of the ZnO semiconductor and the electrical behavior of the fungal cell membrane and that of the proteins that make up the protein crown.

• 청정기술
• /
• 제28권2호
• /
• pp.147-154
• /
• 2022

Titanate nanotubes (TNTs) were synthesized via alkaline hydrothermal treatment using commercial TiO₂ nanoparticles (P25). The TNTs were prepared at various TiO₂/NaOH ratios, hydrothermal temperatures, and hydrothermal times. The synthesized catalysts were characterized by X-ray diffraction, field-emission scanning electron microscopy, N₂ adsorption-desorption isotherms, field-emission transmission electron microscopy, and ultraviolet-visible spectroscopy. TNTs were generated upon a decrease in the TiO₂/NaOH ratio due to the dissolution of TiO₂ in the alkaline solution and the generation of new Ti-O-Ti bonds to form titanate nanoplates and nanotubes. The hydrothermal treatment temperature and time were important factors for promoting the nucleation and growth of TNTs. The TNT catalyst with the largest surface area (389.32 m² g^-1) was obtained with a TiO₂/NaOH ratio of 0.25, a hydrothermal treatment temperature of 130 ℃, and a hydrothermal treatment time of 36 h. Additionally, we investigated the photocatalytic activity of methyl violet 2B (MV) over the TNT catalysts under UV irradiation and found that the degradation efficiencies of the TNTs were higher than that of P25. Among the TNT catalysts, the TNT catalyst that was hydrothermally synthesized for 36 h (TNT 36 h) exhibited a 96.9% degradation efficiency and a degradation rate constant that was 4.8 times higher than P25 due to its large surface area, which allowed for more contact between the MV molecules and TNT surfaces and facilitated rapid electron transfer. Finally, these results were correlated with the specific surface area.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.20-20
• /
• 2003

We developed 30 ㎽-AlInGaN based violet laser diodes. The fabrication procedures of the laser diodes are described as follows. Firstly, GaN layers having very low defect density were grown on sapphire substrates by lateral epitaxial overgrowth method. The typical dislocation density was about 1-3$\times$10$^{6}$ /$\textrm{cm}^2$ at the wing region. Secondly, AlInGaN laser structures were grown on LEO-GaN/sapphire substrates by MOCVD. UV activation method, instead of conventional annealing, was conducted to achieve good p-type conduction. Thirdly, ridge stripe laser structures were fabricated. The cavity mirrors were formed by cleaving method. Three pairs of SiO$_2$ and TiO$_2$ layers were deposited on the rear facet for mirror coating. Lastly, laser diode chips were mounted on AlN submount wafers by epi-down bonding method. The lifetime of the laser diodes was over 10,000 hrs at room temperature under automatic power controlled condition. We expect the performance of the LDs to be improved by the optimization of the growth and fabrication process. The detailed characteristics and important issues of the laser diodes will be discussed at the conference.

• Nuclear Engineering and Technology
• /
• 제55권5호
• /
• pp.1519-1526
• /
• 2023

For the first time Aluminium-BariumeZinc oxide nanocomposite (ZABONC) was synthesized by solution combustion method where calcination was carried out at low temperatures (600℃) to study the electromagnetic (EM) (X/γ) radiation shielding properties. Further for characterization purpose standard techniques like PXRD, SEM, UV-VISIBLE, FTIR were used to find phase purity, functional groups, surface morphology, and to do structural analysis and energy band gap determination. The PXRD pattern shows (hkl) planes corresponding to spinel cubic phase of ZnAl₂O4, cubic Ba(NO₃)₂, α and γ phase of Al₂O₃ which clearly confirms the formation of complex nano composite. From SEM histogram mean size of nano particles was calculated and is in the order of 17 nm. Wood and Tauc's relation direct energy band gap calculation gives energy gap of 2.9 eV. In addition, EM (X/γ) shielding properties were measured and compared with the theoretical ones using standard procedures (NaI (Tl) detector and multi channel analyzer MCA). For energy above 356 keV the measured shielding parameters agree well with the theory, while below this value slight deviation is observed, due to the influence of atomic/crystallite size of the ZABONC. Hence synthesized ZABONC can be used as a shielding material in EM (X/γ) radiation shielding.

• Advances in nano research
• /
• 제15권1호
• /
• pp.35-48
• /
• 2023

Nanoparticles are known for their outstanding properties such as particle size, surface area, optical and electrical properties. These properties have significantly boasted their applications in various surface phenomena. In this work, calcium oxide nanoparticles were synthesized from periwinkle shells as an approach towards waste management through resource recovery. The sol gel method was used for the synthesis. The nanoparticles were characterized using X-Ray diffractometer (XRD), Fourier Transformed Infra-Red Spectrophotometer (FTIR), Brunauer Emmett Teller (BET), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and ultra violet visible spectrophotometer (UV-visible). While DLS and SEM underestimate the particle diameter, the BET analysis reveals surface area of 138.998 m²/g, pore volume = 0.167 m³/g and pore diameter of 2.47 nm. The nanoparticles were also employed as an adsorbent for the purification of dye (methyl orange) contaminated water. The adsorbent showed excellent removal efficiency (up to 97 %) for the dye through the mechanism of physical adsorption. The adsorption of the dye fitted the Langmuir and Temkin models. Analysis of FTIR spectrum after adsorption complemented with computational chemistry modelling to reveal the imine nitrogen group as the site for the adsorption of the dye unto the nanomaterials. The synthesized nanomaterials have an average particle size of 24 nm, showed a unique XRD peak and is thermally and mechanically stable within the investigated temperature range (30 to 70 ℃).

• Journal of Electrochemical Science and Technology
• /
• 제13권2호
• /
• pp.279-291
• /
• 2022

In this report the thermochemical conversion of Sm₂O₃ to SmCl₃ using AlCl₃ in LiCl-KCl melt at 773 K is discussed. The final product was a mixture of SmCl₃, Al₂O₃, unreacted Sm₂O₃ and AlCl₃ in the chloride melt. The electrochemical attributes of the mixture was analyzed with cyclic voltammetry (CV) and square wave voltammetry (SWV). The crystallographic phases of the mixture were studied with X-ray diffraction (XRD) technique. The major chemical conversion was optimized by varying the effective parameters, such as concentrations of AlCl₃, duration of reaction and the amount of LiCl-KCl salt. The extent of conversion and qualitative assessment of efficiency of the present protocol were evaluated with fluorescence spectroscopy, UV-Vis spectrophotometry and inductively coupled plasma atomic emission spectroscopy (ICP-AES) studies of the mixture. Thus, a critical assessment of the thermochemical conversion efficiency was accomplished by analysing the amount of SmCl₃ in LiCl-KCl melt. In the process, a conversion efficiency of 95% was achieved by doubling the stoichiometric requirement of AlCl₃ in 50 g of LiCl-KCl salt. The conversion reaction was found to be very fast as the reaction reached equilibrium in 15 min.

• 한국재료학회지
• /
• 제33권7호
• /
• pp.315-322
• /
• 2023

In the present work, we address the new route for the green synthesis of manganese dioxide (MnO₂) by an innovative method named the solution plasma process (SPP). The reaction mechanism of both colloidal and nanostructured MnO₂ was investigated. Firstly, colloidal MnO₂ was synthesized by plasma discharging in KMnO₄ aqueous solution without any additives such as reducing agents, acids, or base chemicals. As a function of the discharge time, the purple color solution of MnO₄^- (oxidation state +7) was changed to the brown color of MnO₂ (oxidation state +4) and then light yellow of Mn²⁺ (oxidation state +2). Based on the UV-vis analysis we found the optimal discharging time for the synthesis of stable colloidal MnO₂ and also reaction mechanism was verified by optical emission spectroscopy (OES) analysis. Secondly, MnO₂ nanoparticles were synthesized by SPP with a small amount of reducing sugar. The precipitation of brown color was observed after 8 min of plasma discharge and then completely separated into colorless solution and precipitation. It was confirmed layered type of nanoporous birnessite-MnO₂ by X-ray powder diffraction (XRD), fourier-transform infrared spectroscopy (FT-IR), and electron microscopes. The most important merits of this approach are environmentally friendly process within a short time compared to the conventional method. Moreover, the morphology and the microstructure could be controllable by discharge conditions for the appropriate potential applications, such as secondary batteries, supercapacitors, adsorbents, and catalysts.

• 대한화학회지
• /
• 제59권5호
• /
• pp.397-406
• /
• 2015

II-VI 족 무기 화합물 반도체인 ZnO는 폭 넓은 응용분야 때문에 많은 관심을 받고 있다. ZnO는 넓은 밴드갭(3.37 eV)과 큰 excitation binding energy(60 meV)를 가지고 있고 광학특성, 반도체, 압전특성, 자성, 항균성, 광촉매 등 여러 분야에 응용 가능한 물질로 알려져 있다. 특히 광촉매 분야에 적용할 때 재수득의 문제를 위해 자성을 갖는 물질과 core-shell 구조를 이루는 연구가 활발히 진행 되고 있다. 본 연구에서, magnetic core-shell ZnFe₂O₄@ZnO@SiO₂ nanoparticles(NPs)는 3단계 과정을 통해 성공적으로 합성하였다. 합성된 물질들의 구조적 특성을 확인하기 위해 X-ray diffraction(XRD), Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy(FT-IR)을 사용하였다. ZnFe₂O₄ spinel 구조와 ZnO wurtzite 구조는 XRD를 사용하여 확인되었고, 전구체의 농도별 분석을 통해 ZnO 생성 비율을 확인 하였다. 합성된 물질들은SEM을 통하여 표면의 변화를 확인하였다. SiO₂층의 형성과 ZnFe₂O₄@ZnO@SiO₂ NPs의 합성은 FT-IR을 통해 Fe-O, Zn-O 및 Si-O-Si 결합을 확인하였다. 합성된 물질들의 자기적 성질은 Vibrating sample magnetometer(VSM)을 사용 하여 분석하였다. ZnO층과 SiO₂ 층의 형성의 결과는 자성의 증가와 감소로 확인하였다. 합성된 ZnFe₂O₄@ZnO@SiO₂ NPs의 광촉매 효과는 오염물질 대신 methylene blue(MB)를 사용하여 UV 조사 하에 암실에서 실험하였다.

• 보존과학회지
• /
• 제37권6호
• /
• pp.723-737
• /
• 2021

본 연구에서는 17세기 '숨 톨고이(Sum tolgoi)' 건축 유적지에서 출토된 지류 경전을 대상으로 재질의 성분 및 구조에 대해 분석하고 이를 바탕으로 보존처리를 진행하였다. 경전은 흙먼지와 이물질이 많고 형태를 알 수 없을 정도로 뭉쳐 있는 상태로 훼손, 결실, 변색 등이 확인되었다. 티베트어로 쓰인 경전은 UV-Vis 분석 결과 쪽과 먹을 종이 바탕에 사용한 것으로, 고대 몽골어 경전은 흑색의 필사 재료가 먹으로 추정되었다. SEM-EDS와 Micro-XRF 분석 결과를 통해 연단(Pb₃O₄)과 진사(HgS) 혼합 또는 진사(HgS)로 적색 외곽선을 긋고 은니로 경전의 내용을 적었음이 확인되었다. 글씨의 은니는 칼슘과 함께 염화은(AgCl)이 확인되었으며, 황색선에서는 칼슘(Ca)과 석황(As₂S₃)이 확인되었다. 고대 몽골어 경전의 종이는 초본류 섬유와 인피섬유가 혼합된 특징을, 티베트어 경전은 인피섬유의 특징을 나타냈다. 방사성 탄소동위원소 연대측정 결과, 경전의 바탕으로 사용된 종이가 15-17세기에 제작된 것으로 분석되었다. 경전의 보존처리는 출토된 종이의 형태 변형과 취약함으로 인한 2차 손상을 예방하기 위해 보강지(Pre-coated paper) 제작 및 보강 방법에 대한 실험을 바탕으로 진행하였으며, 처리 후 경전의 보관 및 앞·뒤로 기록된 경전 내용을 확인할 수 있도록 마운팅하고 중성지로 상자를 제작하였다. 이번 보존처리는 보존처리 가역성의 원칙에 따른 새로운 보존처리 재료와 방법을 적용한 연구 결과이다.

• 공업화학
• /
• 제7권2호
• /
• pp.379-386
• /
• 1996

광 이량화 특성을 나타내는 1-methyl-4-[2-(4-diethylacetylphenyl)ethenyl] pridinium methosulfate(SbQ-A염)를 dimethyl sulfate, terephthalaldehyde mono-(diethyl acetal) 및 4-picoline을 이용하여 합성하였다. 합성된 SbQ-A염을 PVA와 반응시켜 동일(MW=77,000-79,000g/mol) 분자량을 가진 PVA내 SbQ의 함량이 다른 PVA-SbQ-H 시료 및 SbQ의 함량은 약 1.3mol%로 같으나 PVA의 분자량이 다른 PVA-SbQ-L들을 합성하였다. Gray scale(GS)법을 이용하여 측정된 PVA-SbQ 수용성 감광성 고분자의 상대감도는 PVA내 SbQ의 함량이 증가함에 따라 증가하였으며, PVA의 분자량이 낮아질수록 감소하였다. PVA-SbQ-H의 경우 SbQ 함량이 2.63mol%인 시료는 PVA에 ammonium dichromate가 혼합된 기존시료보다 90배 증가된 감도를 나타내었다. PVA-SbQ를 사용하여 형광체 슬러리를 제조하고 사진식각공정을 거쳐 형광체의 미세패턴을 형성하였다. 형광체 슬러리 제조시 양이온 계면활성제인 cetyltrimethyl ammonium chloride를 첨가제로 사용하면 형광면의 해상도가 증가됨을 알았다.