DOI QR코드

DOI QR Code

Synthesis of Titanate Nanotubes Via A Hydrothermal Method and Their Photocatalytic Activities

  • Kim, Ye Eun (Ulsan Division, Korea Institute of Industrial Technology (KITECH)) ;
  • Byun, Mi Yeon (Center of Environmentally Beneficial Catalysis, The University of Kansas) ;
  • Lee, Kwan-Young (Department of Chemical and Biological Engineering, Korea University) ;
  • Lee, Man Sig (Ulsan Division, Korea Institute of Industrial Technology (KITECH))
  • Received : 2022.04.15
  • Accepted : 2022.05.23
  • Published : 2022.06.30

Abstract

Titanate nanotubes (TNTs) were synthesized via alkaline hydrothermal treatment using commercial TiO2 nanoparticles (P25). The TNTs were prepared at various TiO2/NaOH ratios, hydrothermal temperatures, and hydrothermal times. The synthesized catalysts were characterized by X-ray diffraction, field-emission scanning electron microscopy, N2 adsorption-desorption isotherms, field-emission transmission electron microscopy, and ultraviolet-visible spectroscopy. TNTs were generated upon a decrease in the TiO2/NaOH ratio due to the dissolution of TiO2 in the alkaline solution and the generation of new Ti-O-Ti bonds to form titanate nanoplates and nanotubes. The hydrothermal treatment temperature and time were important factors for promoting the nucleation and growth of TNTs. The TNT catalyst with the largest surface area (389.32 m2 g-1) was obtained with a TiO2/NaOH ratio of 0.25, a hydrothermal treatment temperature of 130 ℃, and a hydrothermal treatment time of 36 h. Additionally, we investigated the photocatalytic activity of methyl violet 2B (MV) over the TNT catalysts under UV irradiation and found that the degradation efficiencies of the TNTs were higher than that of P25. Among the TNT catalysts, the TNT catalyst that was hydrothermally synthesized for 36 h (TNT 36 h) exhibited a 96.9% degradation efficiency and a degradation rate constant that was 4.8 times higher than P25 due to its large surface area, which allowed for more contact between the MV molecules and TNT surfaces and facilitated rapid electron transfer. Finally, these results were correlated with the specific surface area.

Keywords

Acknowledgement

This work was supported by the Korea Institute of Industrial Technology through Research and Development (EH-22-0012, JA-22-0012) and Ulsan Metropolitan City (IZ-21-0064) grants.

References

  1. Jitan, S.A., Palmisano, G., and C. Garlisi, "Synthesis and surface modification of TiO2-based photocatalysts for the conversion of CO2," Catalysts, 10(2), 227 (2020). https://doi.org/10.3390/catal10020227
  2. Yang, Y., Li, J., "TiO2: A Critical interfacial material for incorporating photosynthetic protein complexes and plasmonic nanoparticles into biophotovoltaics," in Application of Titanium Dioxide, London, United Kingdom, IntechOpen (2017).
  3. Kim, Y. E., Byun, M. Y., Lee, K.-Y., and Lee, M. S., "Effects of chlorinated Pd precursors and preparation methods on properties and activity of Pd/TiO2 catalysts," RSC Adv., 10(68), 41462-41470 (2020). https://doi.org/10.1039/d0ra07510h
  4. Qu, J. and Lai, C., "One-dimensional TiO2 nanostructures as photoanodes for dye-sensitized solar cells," J. Nanomater., 2013, 762730 (2013).
  5. Feng, T., Feng, G. S., Yan, L., and Pan, J. H., "One-dimensional nanostructured TiO2 for photocatalytic degradation of organic pollutants in wastewater," Int. J. Photoenergy, 2014(1), 563879 (2014).
  6. Li, Y., Guo, M., Zhang, M., and Wang, X., "Hydrothermal synthesis and characterization of TiO2 nanorod arrays on glass substrates," Mater. Res. Bull., 44(6), 1232-1237 (2009). https://doi.org/10.1016/j.materresbull.2009.01.009
  7. Yu, Y., Zhang, P. Guo, L., Chen, Z., Wu, Q., Ding, Y., Zheng, W., and Cao, Y., "The design of TiO2 nanostructures (nanoparticle, nanotube, and nanosheet) and their photocatalytic activity," J. Phys. Chem. C, 118(24), 12727-12733 (2014). https://doi.org/10.1021/jp500252g
  8. Kasuga, T., Hiramatsu, M., Hoson, A., Sekino, T., and Niihara, K., "Formation of titanium oxide nanotube," Langmuir, 14(12), 3160-3163 (1998). https://doi.org/10.1021/la9713816
  9. Tsvetkov, N., Larina, L., Kang, J. K., and Shevaleevskiy, O., "Sol-gel processed TiO2 nanotube photoelectrodes for dye-sensitized solar cells with enhanced photovoltaic performance," Nanomaterials, 10(2), 296 (2020). https://doi.org/10.3390/nano10020296
  10. Cossuet, T., Rapenne, L., Renou, G., Appert, E., and Consonni, V., "Template-assisted growth of open-ended TiO2 nanotubes with hexagonal shape using atomic layer deposition," Cryst. Growth Des., 21(1), 125-132 (2021). https://doi.org/10.1021/acs.cgd.0c00952
  11. Kim, M., Shin, N., Lee, J., Lee, K., Kim, Y.T., and Choi, J., "Photoelectrochemical water oxidation in anodic TiO2 nanotubes array: Importance of mass transfer," Electrochem. Commun., 132, 107133 (2021). https://doi.org/10.1016/j.elecom.2021.107133
  12. Lopez Zavala, M. A., Lozano Morales, S. A., and Avila-Santos, M. "Synthesis of stable TiO2 nanotubes: Effect of hydrothermal treatment, acid washing and annealing temperature," Heliyon, 3(11), e00456 (2017). https://doi.org/10.1016/j.heliyon.2017.e00456
  13. Kasuga, T., Hiramatsu, M., Hoson, A., Sekino, T., and Niihara, K., "Titania nanotubes prepared by chemical processing," Adv. Mater., 11(15), 1307-1311 (1999). https://doi.org/10.1002/(SICI)1521-4095(199910)11:15<1307::AID-ADMA1307>3.0.CO;2-H
  14. Yang, J., Du, J., Li, X., Liu, Y., Jiang, C., Qi, W., Zhang, K., Gong, C., Li, R., Luo, M., and Peng, H., "Highly hydrophilic TiO2 nanotubes network by alkaline hydrothermal method for photocatalysis degradation of methyl orange," Nanomaterials, 9(4), 526 (2019). https://doi.org/10.3390/nano9040526
  15. Li, P., Wang, J., Liu, L., Ma, J., Ni, Y., Wang, H., and Song, Y., "The effect of atmospheric pressure on the growth rate of TiO2 nanotubes: Evidence against the field-assisted dissolution theory," Electrochem. Commun., 132, 107146 (2021). https://doi.org/10.1016/j.elecom.2021.107146
  16. Baszczuk, A., Jasiorski, M., and Winnicki, M., "Low-temperature transformation of amorphous sol-gel TiO2 powder to anatase during cold spray deposition," J. Therm. Spray Technol., 27(8), 1551-1562 (2018). https://doi.org/10.1007/s11666-018-0769-0
  17. Muniyappan, S., Solaiyammal, T., Sudhakar, K., Karthigeyan, A., and Murugakoothan, P., "Conventional hydrothermal synthesis of titanate nanotubes: Systematic discussions on structural, optical, thermal and morphological properties," Mod. Electron. Mater., 3(4), 174-178 (2017). https://doi.org/10.1016/j.moem.2017.10.002
  18. Huang, J., Cao, Y., Huang, Q., He, H., Liu, Y., Guo, W., and Hong, M., "High-temperature formation of titanate nanotubes and the transformation mechanism of nanotubes into nanowires," Cryst. Growth Des., 9(8), 3632-3637 (2009). https://doi.org/10.1021/cg900381h
  19. Li, J., Wang, Z., Zhao, A., Wang, J., Song, Y., and Sham, T. K., "Nanoscale clarification of the electronic structure and optical properties of TiO2 nanowire with an impurity phase upon sodium intercalation," J. Phys. Chem. C, 119(31), 17848-17856 (2015). https://doi.org/10.1021/acs.jpcc.5b04276
  20. Joo, J. B., Zhang, Q., Lee, I., Dahl, M., Zaera, F., and Yin, Y., "Mesoporous anatase titania hollow nanostructures though silica-protected calcination," Adv. Funct. Mater., 22(1), 166-174 (2012). https://doi.org/10.1002/adfm.201101927
  21. Huang, J., Cao, Y., Huang, Q., He, H., Liu, Y., Guo, W., and Hong, M., "High-temperature formation of titanate nanotubes and the transformation mechanism of nanotubes into nanowires," Cryst. Growth Des., 9(8), 3632-3637 (2009). https://doi.org/10.1021/cg900381h
  22. Li, F., Liang, J., Zhu, W., Song, H., Wang, K., and Li, C., "Hydrogenation of m-chloronitrobenzene over different morphologies Ni/TiO2 without addition of molecular hydrogen," Catalysts, 8(5), 2-13 (2018).
  23. Kim, S. G., Dhandole, L. K., Lim, J. M., Chae, W. S., Chung, H. S., Oh, B. H., and Jang, J. S., "Facile synthesis of ternary TiO2 NP/Rh & Sb-codoped TiO2 NR/titanate NT composites photocatalyst: Simultaneous removals of Cd2+ ions and Orange (II) dye under visible light irradiation (Λ ≥ 420 nm)," Appl. Catal. B Environ., 224, 791-803 (2018). https://doi.org/10.1016/j.apcatb.2017.11.013
  24. Leng, M., Chen, Y., and Xue, J., "Synthesis of TiO2 nanosheets via an exfoliation route assisted by a surfactant," Nanoscale, 6(15), 8531-8534 (2014). https://doi.org/10.1039/c4nr00946k
  25. Li, C., Zong, L., Li, Q., Zhang, J., Yang, J., and Jin, Z., "Photocatalytic oxidation of propylene on Pd-loaded anatase TiO2 nanotubes under visible light irradiation," Nanoscale Res. Lett., 11(1), 271 (2016). https://doi.org/10.1186/s11671-016-1486-6
  26. Mowbray, D.J., Martinez, J. I., Lastra, G. J. M., Thygesen, K. S., and Jacobsen, K. W., "Stability and electronic properties of TiO2 nanostructures with and without B and N doping," J. Phys. Chem. C., 113(28), 12301-12308 (2009). https://doi.org/10.1021/jp904672p
  27. Tao, J., Luttrell, T., and Batzill, M., "A two-dimensional phase of TiO2 with a reduced bandgap," Nat. Chem., 3(4), 296-300 (2011). https://doi.org/10.1038/nchem.1006
  28. Singh, M., Goyal, M., and Devlal, K., "Size and shape effects on the band gap of semiconductor compound nanomaterials," J. Taibah Univ. Sci., 12(4), 470-475 (2018). https://doi.org/10.1080/16583655.2018.1473946
  29. Amano, F., Nogami, K., and Ohtani, B., "Visible light-responsive bismuth tungstate photocatalysts: Effects of hierarchical architecture on photocatalytic activity," J. Phys. Chem. C., 113(4), 1536-1542 (2009). https://doi.org/10.1021/jp808685m