• Bulletin of the Korean Chemical Society
• /
• v.33 no.9
• /
• pp.3119-3121
• /
• 2012

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.3 s.52
• /
• pp.259-263
• /
• 2005

The aim of the present study is to evaluate relationship between UV-induced MED and perfusion value assessed by Laser Doppler Perfusion Imager. In this study, A increasing linear relationship is seen between perfusion and dose (p<0.05). The dose-response curve show a steep slope in the case of lower MED values group after MED point, For higher MED group, increase with a gentle slope.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.2 s.179
• /
• pp.129-137
• /
• 2006

Polymer micro-fluidic devices were fabricated with laser processes. A UV laser and a femto laser were used to machine polymer micro-fluidic structures directly. This laser direct machining process suits the need of rapid prototyping, as in many applications changes from the original design are often required. As examples, two polymer micro-systems were developed: a micro-check valve and a micro diffuser pump. The micro fluidic devices can be applied for many applications such as clinical diagnostics and drug delivery. Advantages and disadvantages using polymers as a material for micro-fluidic applications are discussed.

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2005.11a
• /
• pp.101-104
• /
• 2005

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2004.10a
• /
• pp.68-72
• /
• 2004

• Bulletin of the Korean Chemical Society
• /
• v.19 no.8
• /
• pp.822-824
• /
• 1998

The simple and convenient measurement of the dissociation constant of an indicator, thymol blue, was achieved by using a portable diode-laser/fiber-optic thermal lensing spectroscopy, which consisted of a visible diode laser, a photodiode, and an optical fiber. It gives comparable results to the cited value obtained from a conventional UV/VIS spectroscopy.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.4
• /
• pp.51-55
• /
• 2021

The nurses manually carry out the intravenous therapy for the patients. Using an Arduino, the fine flow controlling device was invented to provide an ongoing patient care. The medication is injected through a peristaltic pump, and the amount of the solution is controlled with a RGB color sensor. The power of the device is supplied through the batteries. An amount of the injection is measured with LIG strain sensor fabricated by 355nm UV pulsed laser. This system will provide a better medical service.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.355-357
• /
• 2001

ZnO thin films were deposited on (001) sapphire substrate at various ambient gas pressure by pulsed laser deposition(PLD). Oxygen was used as ambient gas, and oxygen gas pressure was varied from 1.0${\times}$10$\^$-6/ Torr to 500 mTorr during the film deposition. As oxygen gas pressure increase in the region below critical pressure photoluminescence(PL) intensity in UV and green region increase. As oxygen gas pressure increase in the region above critical pressure photoluminescence(PL) intensity in UV and green region decrease. Each of critical ambient gas Pressures was 350 mTorr for UV emission and 200 mTorr for green emission.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.141-144
• /
• 2002

Computer code was developed to design waveguide gratings based on coupled-mode equations and the transfer matrix formalism. The experimental set-up has been constructed for inscribing Bragg gratings in planar waveguides with a phase mask and uv laser beam, which enables alignment and packaging of grating devices as well as in-situ performance measurements. Bragg grating has been fabricated on silica planar waveguides with 0.75% Germanium concentration and its transmittance spectrum was measured to have 95% reflectance at the peak wavelength. Optical losses as the function of the misalignment were measured and their usage is described.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.234-235
• /
• 2003

All solid-state UV lasers provide efficient, clean and semipermanent light sources for various applications, such as eye surgery, microchip lithography. $CsLiB_{6}O_{10}$ (CLBO) is one of the most suitable crystals for UV generation because of its small walk-off, large effective nonlinear susceptibility in UV region and high damage threshold. We produced fourth (266 nm) and fifth (213 nm) harmonic generation of an Nd：YAG laser (1064 nm) with $LiB_{3}O_{5}$ as a second harmonic generation medium and CLBO as a fourth harmonic and fifth harmonic mediums. (omitted)