• 공업화학
• /
• 제16권4호
• /
• pp.570-575
• /
• 2005

하수방류수 살균 소독에 이용되는 UV 램프를 기존의 전극용보다 효율을 높이고 수명이 긴 무 전극 UV 램프를 제작하고 그 성능을 알아보았다. 우선 활성물질을 변화시키면서 제조한 램프의 UV 강도 및 온도의 변화를 실험 하였다. 그 결과 활성물질이 Hg/In의 무게비 95/5로 만든 램프를 250 min간 운전한 결과 UV 강도 $300{\mu}W/cm^2$ 및 온도 $200{\sim}250^{\circ}C$로 가장 안정적인 결과를 나타내었다. 그러나 무전극 램프를 장시간 발광시켰을 경우 램프의 온도가 상승하기 때문에 이를 방지하기 위해 실제 하수처리공정에 적용할 수 있는 냉각이 가능한 이중관 형태로 제작하여 UV 강도와 온도 변화특성을 알아보았다. 또한 제작된 무전극 UV lamp를 하수 방류수의 살균 소독을 위하여 대장균(E-coli.)으로 실험한 결과에서도 99.9% 이상의 살균효율을 보였다.

• 조명전기설비학회논문지
• /
• 제19권8호
• /
• pp.19-23
• /
• 2005

본 연구의 목표는 안정된 출력과 높은 효율을 갖는 저압 UV램프의 구동시스템을 설계하는 것이다. UV램프 시스템은 반도체공정, 살균 등 그 적용범위가 대단히 넓은 전력설비의 하나이며 고부가가치의 제품을 생산하기 위해서는 출력의 안정화 기술은 필수적이다. 본 연구에서 저압 UV램프의 구동시스템 설계 목표는 변환효율 90[%], 출력안정도 ${\pm}7.5[%]$, 램프출력은 300[W] 이상으로, 연구목표에 상응하는 결과를 얻을 수 있었으며 국내시장 선점에 유리할 것이고, 제품의 생산비를 낮추는 시도를 계속한다면, 수출도 가능할 것으로 예상된다. 또한 부가적인 보호회로가 개발되면, 자외선램프용 전자식 안정기의 신뢰성을 크게 재고시킬 것이다.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2011년도 춘계학술대회
• /
• pp.205-227
• /
• 2011

On this study, the test for air-purification was executed as using the UV lamp and the UV lamp on which the TiO2 catalyst had been deposited with glass fiber in the reactor chamber. It aimed at the basic data of air-purifier as assessing the features of removing abilities for various contaminants including CH3COOH, NH3, NO, and SO2 as varying the number of TiO2 coating, the wave of UV lamp, and the amount of additive CaO as variables.

• 한국물환경학회지
• /
• 제16권4호
• /
• pp.445-457
• /
• 2000

This study was carried out comparing with ozone oxidation and photocatalytic degradation for removal of geosmin. In the change of pH, Ozonation, UV-Germicidal lamp and Halogen lamp irradiation and Halogen $lamp/TiO_2$ Powder was very slowly changing, but UV-Germicidal $lamp/TiO_2$ Powder was rapidly changed from 7.0 to 7.7 until 300min of irradiation time, and varied a little after. Geosmin degradation ratio was as following, UV-Germicidal $lamp/TiO_2$ $Powder(200mg/L){\geq}O_3$ > UV-Germicidal $lamp/TiO_2$ $Pw(100mg/L)$ > UV-Germicidal lamp > Halogen lamp. The result of investigation of generated by-products were 3-Heptanone, two sort of aldehydes and three sort of alcohols by ozonation. But It was not generated by photocatalytic degradation.

• 상하수도학회지
• /
• 제23권1호
• /
• pp.69-75
• /
• 2009

The characteristics of disinfection and organic removal were investigated with pulse UV lamp in this study. The intensity and emission wavelength of pulse UV Lamp were compared with low pressure UV lamp. The emission spectrum range of pulse UV lamp was between 200 and 400 nm while the emission spectrum of low pressure UV lamp was only single wavelength of 254nm. 3 Log inactivation rate of B. subtilis spore by pulse UV and low pressure UV irradiation was determined as $44.71mJ/cm^2$ and $57.7mJ/cm^2$, respectively. This results implied that wide range of emission spectrum is more effective compared to single wavelength emission at 254nm. 500ng/L of initial 2-MIB concentration was investigated on the removal efficiency by UV only and $UV/H_2O_2$ process. The removal efficiency of UV only process achieved approximately 80% at $8,600mJ/cm^2$ dose. 2-MIB removal rate of $UV/H_2O_2$ (5 mg/L $H_2O_2$) process was 25 times increased compared to UV only process. DOC removal efficiency for the water treatment plant effluent was examined. The removal efficiency of DOC by UV and $UV/H_2O_2$ was no more than 20%. Removal efficiency of THMFP(Trihalomethane Formation Potential), one of the chlorination disinfection by-products, is determined on the UV irradiation and $UV/H_2O_2$ process. Maximum removal efficiency of THMFP was approximately 23%. This result indicates that more stable chemical structures of NOM(Natural Organic Matter) than low molecule compounds such as 2-MIB, hydrogen peroxide and other pollutants affect low removal efficiency for UV photolysis. Consequently, pulse UV lamp is more efficient compared to low pressure lamp in terms of disinfection due to it's broad wavelength emission of UV. Additional effect of pulse UV is to take place the reactions of both direct photolysis to remove micro organics and disinfection simultaneously. It is also expected that hydrogen peroxide enable to enhance the oxidation efficiency on the pulse UV irradiation due to formation of OH radical.

• 생명과학회지
• /
• 제9권5호
• /
• pp.581-589
• /
• 1999

This study was carried out to compare ozonation with photocatalysis degradation for removal Geosmin of algae byproduct. The change of pH was decresed from 7.02 to 2.8 after contact time 480 minute for ozonation. In case of UV-germicidal lamp, pH was very quickly increased from 7.02 to 7.5, but Halogen lamp did very slowly change pH. Geosmin degradation ratio was as following, UV-germicidal lamp/TiO2(100mg/L) O3>UV-germicidal lamp/TiO2(50mg/L)>UV-germicidal lamp(10W)>halogen lamp(50W). Instead of TiO2 suspension solution, Geosmin degradation ratio was very low using hollow bead and pellet as coated TiO2. As a result of identifing byproducts, ozonation generated three species of aldehyde such as 3-Heptanone and three species of alcohol such as Heptanal, but photocatalysis formed 1, 14-Tetradecanediol infinitesimally.

• 전기학회논문지P
• /
• 제58권4호
• /
• pp.455-460
• /
• 2009

A number of factors combine to make ultraviolet radiation a superior means of water purification for ground water, rainwater harvesting systems and so on. Ultraviolet radiation is capable of destroying all types of bacteria. Additionally, ultraviolet radiation disinfects rapidly without the use of heat or chemical additives which may undesirably alter the composition of water. In a typical operation, water enters the inlet of a UV lamp and flows through the annular space between the quartz sleeve and the outside chamber wall. The irradiated water leaves through the outlet nozzle. Several design features are combined to determine the dosage delivered. The first is Wavelength output of the lamp, the Second is Length of the lamp - when the lamp is mounted parallel to the direction of water flow, the exposure time is proportional to the length of the lamp, the third is Design water flow rate - exposure time is inversely related to the linear flow rate, the forth is Diameter of the purification chamber - since the water itself absorbs UV energy, the delivered dosage diminishes logarithmically with the distance from the lamp. In this paper, It describe the how to design optimal UV disinfection device for ground water and rainwater. To search the optimal design method, it was performed computer simulation with 3D-CFD discrete ordinates model and manufactured prototype. Using proposed design method manufactured prototype applied to disinfection test and proved satisfied performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.937-938
• /
• 2006

본 연구는 광 출력이 조정이 가능한 UV Lamp용 안정기에 관한 연구이다. UV Lamp는 하수 종말 처리장의 하수 처리에 사용되고 있는데, 기존의 UV Lamp용 안정기는 처리되는 하수의 양과 관계없이 일정한 출력을 내는 방식으로 항상 일정의 전력을 소모하였다. 본 연구에서는 하수의 양에 따라 광 출력을 최대 출력의 50%까지 안정기에서 조정하는 방식으로 하수의 양이 적을 시에는 광 출력을 줄여 전력의 소모를 줄일 수 있고, 아울러 고가의 UV Lamp의 수명을 연장할 수 있어 UV Lamp 및 교체 비용의 감소를 기대할 수 있다.

• 한국환경보건학회지
• /
• 제34권6호
• /
• pp.439-445
• /
• 2008

The feasibility study for the application of the removal and mineralization of Rhodamine B (RhB) was performed in a batch electrochemical reactor. The electro/UV process was consisted of DSA (dimensionally stable anode) electrode and UV-C or ozone lamp. The experimental results showed that RhB removal by the ozone lamp was higher than that of the UV-C lamp. Optimum current of the electro/UV process was 1 A. The electrochemical, UV and electro/UV process could completely degrade RhB, while a prolonged treatment was necessary to reach a high level RhB mineralization. It was observed that RhB removal in electro/UV process is similar to the sum of the UV and electrolytic decolorization. However, it was found that the COD of RhB could be degraded more efficiently by the electro/UV process (90.2 %) than the sum of the two individual oxidation processes [UV (19.7%) and electrolytic process (50.8%)]. A synergetic effect was demonstrated between the UV and electrolysis.

• 한국방재학회 논문집
• /
• 제11권2호
• /
• pp.179-183
• /
• 2011

본 연구에서는 광 반응기 내부의 영향반경을 평가하기 위해 자외선(UV-C) 램프의 강도와 photochemical에 의한 OH 라디칼 생성량을 측정하였다. 또한 $TiO_2$ (Degussa P-25)를 농도별로 첨가하여 자외선 램프의 영향반경을 측정하였다. 광 반응기는 아크릴 재질의 bath 타입을 사용하였고, 254 nm의 파장을 가진 UV-C 자외선 램프를(SANKYO DENKI, 지름 : 2.2 cm, 길이 : 18.5 cm) 사용하였다. 램프의 소비전력은 10.5 W이고, OH 라디칼 생성량을 측정하기 위해 KI dosimetry를 사용하였다. 실험 결과로부터 광 반응기에서 자외선의 강도가 0.367 mW/$cm^2$이상 조사되어야하고, 거리는 13 cm 이내에서 OH 라디칼 생성에 영향을 미치는 것으로 나타났다. 또한 광촉매 반응기에서는 촉매의 농도로 인해 자외선의 영향반경이 매우 감소하는 것을 확인할 수 있었다.