• The Korean Journal of Food And Nutrition
• /
• v.36 no.1
• /
• pp.17-24
• /
• 2023

To apply UV-C as a non-heating sterilization method to increase the microbiological safety of fresh seedless watermelon products, reductions in E. coli and quality changes by treatment dose (0, 2, 4, 8, 14, 20 kJ/m²) were investigated. The pH, sugar content, and hardness of watermelon inoculated with E. coli were not significantly different according to the UV-C treatment dose, but the polyphenol content was significantly decreased compared to the controls (425.4 GAE ㎍/g F.W.). When treated with 2 and 4 kJ/m², the lycopene content was 31.6 and 30.9 ㎍/g F.W., respectively, which was increased compared to the controls (28.5 ㎍/g F.W.). The arginine and citrulline content was also significantly increased compared to the controls. The number of E. coli was significantly decreased compared to the controls following UV-C treatment. Considering the degree of E. coli reduction, lycopene content, arginine content, citrulline content, and UV-C irradiation time, subsequent experiments were conducted by selecting a UV-C treatment dose of 2 kJ/m². The results of confirming the degree of reduction in the number of E. coli colonies by a single treatment and combined treatment with UV-C 2 kJ/m² and 70% ethanol showed that the combined treatment was most effective as colonies were decreased by 2.3 log CFU/g compared to the controls. Therefore, it is judged that UV-C 2 kJ/m² radiation and combined treatment with 70% ethanol could be applied as a non-heating sterilization method for fresh watermelon slices.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.12
• /
• pp.1798-1804
• /
• 2012

To prolong the shelf-life of domestic peaches, samples were treated with UV-C (0~10.0 $kJ/m^2$) and the spoiling rate and changes in physico-chemical and sensory properties were investigated. No spoiled peaches were observed within the first four days of storage in the control and 2.5 $kJ/m^2$ UV-C treatment groups. However, spoilage was observed in these groups on day six, and 29.17% and 25.0% of the samples showed spoilage on 10 day, respectively. Moreover, samples treated with greater than 5.0 $kJ/m^2$ of UV-C showed a higher percentage (41.67% or higher) of spoilage than those of the control or 2.5 $kJ/m^2$ UV-C treatment groups on 10 day. Additionally, weight changes in the peaches were the lower in the control group and 2.5 $kJ/m^2$ UV-C treatment group than in those treated with 5.0 $kJ/m^2$ of UV-C treatment or higher during 10 days of storage. There was no difference in pH among treatments, regardless of storage time. The hardness of the samples was not changed immediately after UV-C treatment, but that of samples treated with 5.0~10.0 $kJ/m^2$ of UV-C decreased rapidly after four days, when compared to the control and 2.5 $kJ/m^2$ UV-C treatment groups. No significant changes in the lightness and redness of the samples were observed in response to UV-C treatment, however, UV-C treatment led to a slight decrease in the yellowness of the samples. The initial taste, flavor, color, texture, and overall acceptance did not differ among control and UV-C treatments. The sensory score of the samples was the highest after 2 and 4 days of storage, while it decreased thereafter. In general, samples in the control and the 2.5 $kJ/m^2$ UV-C treatment groups showed higher sensory quality than those treated with UV-C at 5.0 $kJ/m^2$ or higher.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.382-389
• /
• 2019

A novel folding process is proposed using a repeated cold-die forging and annealing to form a sterling silver ring. Sterling silver plate was cut into a doughnut shape, and lattices with 0.43-mm line-width were imprinted on it. The sample was folded by forging using dies with slopes of $45^{\circ}$, $60^{\circ}$, and $75^{\circ}$ and annealing. For comparison, samples were also fabricated without annealing. Strain was identified by measuring the length of lattices. Vernier calipers, a Vickers hardness tester, an optical microscope, and a UV-VIS colorimeter were used to determine the size, hardness, microstructure, and body color. Without annealing, cracks occurred. However, successful deformation was possible when annealing was used. The results of macro strain measurements show that the outer diameter and width decreased, while the inner diameter and thickness increased after the final process. The maximum strain was increased 0.128 toward the parallel direction. The Vickers hardness decreased after annealing and increased after the folding process. The microstructure results showed that the grain size increased after annealing but decreased after folding. The color difference based on the Lab index was under 10 for all processes. Eventually, a doughnut-shaped silver plate was successfully deformed into a ring shape by the folding process.

• Korean Chemical Engineering Research
• /
• v.54 no.3
• /
• pp.387-393
• /
• 2016

Fluorinated polyurethane coating solutions were synthesized from perfluoroalkyl alcohol, toluene diisocyanate, and polycarbonate diol as starting materials. Next, coating films were prepared by spin-coating the fluorinated polyurethane coating solutions on the PC substrates, followed by thermal curing at $120^{\circ}C$. The obtained fluorinated polyurethane coating films were characterized by FT-IR spectroscopy, UV-Vis spectrometer, contact angle tester and pencil hardness tester. Contact angle measurements of water on the coating films showed that the addition of perfluoroalkyl alcohol improved the water repellency and increased the contact angle from $81^{\circ}C$ to $111^{\circ}C$. However, the pencil hardness of coating films exhibited a constant grade of H, irrespective of the addition of perfluoroalkyl alcohol.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.1
• /
• pp.28-35
• /
• 2000

This paper deals with a coating technique for hardening surface layer of softwood(Larix leptolepis) flooring board to improve its surface properties such as hardness and abrasion resistance, Two coating methods were applied for surface hardening of the wood in this study. First, several functional monomers were added in UV-curing epoxy acrylate varnish. Secondly, unsaturated polyester varnish was used as under coat and acryl varnish including anti-abrasive agent was used as top coat. The hardness of the treated wood was similar to that of high density hardwood such as keruing by the first coating method. The abrasion resistance of the coated wood was greatly improved by the second method. Adhesion properties and impact resistance of the coated wood surface were also good. It was suggested that the well-coated softwood could be used as interior flooring board for heavy walking as substitute for hardwood.

• Polymer(Korea)
• /
• v.38 no.5
• /
• pp.573-579
• /
• 2014

The effect of synthesis conditions such as carbon nanotube (CNT), 2,2,2-trifluoroethylmethacrylate (3FMA), and composition of organic-inorganic material in ozone resistance and surface characteristics of ultraviolet cured organic-inorganic hybrid coating film has been investigated. Coating solution was prepared using tetraethoxysilane (TEOS), silane coupling agent methacryloyloxypropyltrimethoxysilane (MPTMS), 3FMA, various organic materials with acrylate group, and CNT, then bar-coated on substrates using applicator, and densified by UV-curing. It was found that ozone resistance and adhesion of the coating film were strongly dependent upon contents of TEOS, 3FMA, and CNT. Especially, ozone resistance, adhesion, and surface hardness of coating film with CNT were improved, relatively. Ozone resistance of coating film with a high TEOS content was increased, but adhesion was decreased. In addition, it was also found that ozone resistance of coating film was increased with contents of 3FMA. On the other hand, surface hardness was decreased with increase of 3FMA.

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.2
• /
• pp.187-192
• /
• 2000

We prepared $SiO_2-Na_2O-R_mO_n$ thin films based on economics of water glass and investigated optical, mechanical properties of product thin films. Coating sol stabilized with 1 N HCl and 1 N $NH_4OH$, was fabricated by using water glass and calcium nitrate, and aluminum nitrate as starting materials. As-coated films on stainless steel, Si wafer and soda-lime-silica glass by spinning were finally annealed at 500, 750 and $900^{\circ}C$. Micro hardness and nitrogen content in film surface of annealed films were measured by Knoop hardness tester and EDX, respectively. Field Emission Scanning Electron Microscope (FE-SEM) and UV-VIS spectroscopy were adopted to analyze surface morphology and thickness and reflectance of our films.

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.621-626
• /
• 2012

In this study, the composite coating materials with improved thermal insulation property were prepared by incorporating the hollow micro-spheres with high heat transfer resistance. The UV curable resin system consisting of hexa aliphatic urethane acrylate (UP118), trimethylolpropane triacrylate (TMPTA), 1,6-hexanediol diacrylate (HDDA), and photoinitiator (Irgacure184) was employed as an organic binder. The glass substrates were coated by the prepared composites via bar coating method and cured under UV radiation. The optical transparency, thermal insulation property, adhesion, and surface hardness of the glass coated with composites containing different type of micro-spheres were investigated. The incorporation of micro-spheres with only 20 vol% of content resulted in remarkable improvement in the thermal insulation property of the coated glass. In addition, the transparent coated glass with light transmittance of about 80% could be obtained when silica micro-sphere (SP) was used as a thermal barrier.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.1
• /
• pp.141-148
• /
• 2012

In this study, the composite coating materials with improved thermal insulation property were prepared by incorporating the hydrophobic silica aerogel. The surface modification of silica aerogel was performed to obtain UV curable urethane acrylate hybrid coating sols with good compatibility by using surfactant(Brij 56). The polycarbonate substrates were coated by the prepared composites and cured under UV radiation. The incorporation of aerogel with only 10 vol% of content resulted in remarkable improvement by about 28% in the thermal insulation property of the coated film, as compared with substrate. In addition, increasing aerogel content was found to give minor effect on the variation of optical transparency, adhesion, and surface hardness of the coated film.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.6
• /
• pp.418-423
• /
• 2012

In order to develop the end use of cylindrical laminated veneer lumber (LVL) such as wooden crafts, the water proof-bonding strength, the resistance to abrasion and the surface hardness by painting the surface of LVL were investigated. The study results were as follows; The water proof-bonding strength through 5 cyclic test by boiling in water immersion and drying were favorable without delamination of glue line. Then the formulation of glue was resorcinol resin (100) to hardener of paraformaldehyde (5) by mixed weight percentage. The resistance to abrasion was relatively higher at cross section than tangential section. When tangential section of LVL was painted by UV protection oil, the resistance to abrasion was improved. In case of an cross section of LVL, the higher surface hardness appeared at larch core than radiata pine LVL. Also, in case of an tangential section of LVL, the higher surface hardness appeared at glue line than veneer side.