• 한국인쇄학회지
• /
• 제21권2호
• /
• pp.55-65
• /
• 2003

A novel evaluation method is investigated for UV curing process in printing system. The method is based on the measurement of conducivity change by the photopolymerization of UV curable inks and paints. It is found that the decrease of conductivity is caused by photopolymerization of epoxy monomer during UV curing process of ink film and the by the rate of UV curing. It is possible to make the dynamical evaluation the curing rate of UV curable ink in curing process by this method.

• 한국인쇄학회지
• /
• 제22권1호
• /
• pp.29-38
• /
• 2004

With increasing interests in environment matters over the world, incessant efforts to develop products which meet these environmental requirements have been made also in paint industry. Among the efforts in this field, UV(Ultra Violet) curing system is focused as one of most potential system. It is because this system not only proved to be environmentally friendly compared with heat curing system or other system but also has economical merit of smaller facility, less energy consumption, and better productivity. Superior properties in many application is surely one of its dominant merit. With these advantage UV system is applied to a variety of industrial fields and expected to have continuous growth in the future. As practical application of UV system has shown lasting progress, R&D on basic material of this system keeps up with. This is a study on photo-initiator that is a fundamental substance in UV curing method and amine, its aid for better effect. After reviewing on them in the aspects of function, economy, and stability, optimal foumula is pursued through experiments when applied to real products.

• 한국산학기술학회논문지
• /
• 제15권11호
• /
• pp.6464-6471
• /
• 2014

웨이퍼 단위의 렌즈를 성형 시 일반적으로 UV경화 방식을 사용한다. 이 경우 발생될 수 있는 문제점은 크게. 경화후 이형과정에서 성형 렌즈의 금형 고착문제, 경화 공정 중 발생하는 소재의 수축 현상으로 렌즈간의 형상 오차 발생 및 웨이퍼 단위의 변형, 위치별 렌즈 형상 편차 발생, 웨이퍼 양면의 렌즈 형상 및 센터 정렬 오차 등이다. 이중 UV경화 과정에 직접적인 영향을 받는 것은 형상 오차 및 변형으로 그 요인은 UV 조사 균일성, UV 강도에 대한 경화도, UV 경화 소재의 수축 특성이다. 따라서 소재에 대한 경화 모델링 수립 및 경화 반응에 따른 수축율과 물성 변화에 대한 이론정립이 필요하다. 또한 이러한 모델링을 해석에 구현할 수 있는 해석 툴 개발이 필요하다. 본 연구에서는 Comsol을 이용하여 수립된 모델링을 반영하고 이를 통하여 웨이퍼 단위 렌즈의 성형 공정에 대한 해석 기법을 제안하였다. 이를 통해 7.2mm에 대한 누적 공차값을 실제 성형 공정 후 결과($0.149{\mu}m$)과 비교하여 제안한 해석 방법에 의한 결과($0.215{\mu}m$)을 비교, 검증을 수행하였으며 이를 통하여 UV경화 공정 후 변형에 대한 해석 가능성을 확인하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1996년도 재료학회 추계학술발표회
• /
• pp.183-183
• /
• 1996

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.525-526
• /
• 2007

• 한국인쇄학회지
• /
• 제30권2호
• /
• pp.59-68
• /
• 2012

As one of the eletronic device industries has been developed by using a recent printing method, the consumption of Ag paste has been on the rise as well. The printing method has simple processes in comparison with other methods. Also it enables to be large-scaled and to lower price ranges. If UV curing system would be applied to the printing method, energy consumption and dangerousness from curing system can be minimized in a short period of time so that its method can be more eco-friendly. This study conducted an experiment in order to make UV curing Ag paste which is feasible to implement micro patterns with different dispersing agents. The purpose of the study is to analysis the suitable printability for micro pattern and to test dispersibility, hardening properties, conductivity and adhesive stength by measuring viscosity, TI(thixotropy index), G', G", $tan{\delta}$(G"/G') after making paste. We have experimented with four dispersing agents. After We did an analysis of characteristic of rheology, conductivity and adhesive stength, etc, We confirmed that the paste added FP 3060 has excellent dispersibility, conductivity and adhesive stength. If the paste has excellent dispersibility, we will expect that micro pattern is made by that.

• 한국염색가공학회지
• /
• 제17권6호
• /
• pp.27-35
• /
• 2005

Conventional pad- dry-cure(thermo-fixation) process usually produces functional performance on both sides of a fabric. UV curing technique was applied to impart water- and oil-repellent finish effective only on the face of a PET knitted fabric. The preferential one-side coating, by virtue of the limited penetration of UV light, was achieved by W curing after padding of a fluorocarbon agent without special coating or printing equipments. The difference in the functional property of face and back sides was examined by measuring water and oil repellency at each side of the treated fabric. The influence of pre/post-irradiation dose and agent concentration on the performance of the finished fabrics were investigated. While increase in both resin concentration and post-irradiation did not have significant effect on the finish, UV pre-irradiation of PET fabrics caused remarkable influence presumably due to appropriate surface modification of PET fabrics required for facile wetting of the resin. The dimensional stability and color change of the UV cured fabrics measured by FAST and reflectance spectrophotometry showed significantly decreased color difference and increased percent extension compared with the samples pre-irradiated without agent application.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 춘계학술발표대회 논문집
• /
• pp.192-195
• /
• 2003

UV curing technology becomes important in various sectors of applications due to the high efficiency, environmental protection and saving energy. Above all, It is necessary to consider the formulation of glass fiber sizes in some detail to achieve this study since they are governed by the products to be made and their performance in the composites made form them. The effect of glass fiber sizes against UV curing system was investigated by the method of changing size formulation. Nanosil 700 was used in order to increase curing efficiency. Yellow effect was not observed at the 1% fiber sizer content.

• 한국정밀공학회지
• /
• 제26권8호
• /
• pp.24-28
• /
• 2009

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.977-978
• /
• 2008