• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.9
• /
• pp.577-582
• /
• 2017

The white light of a hybrid LED is obtained by using red and green organic fluorescent layers made of polymethylmethacrylate (PMMA) films, which function as color down-conversion layers of blue light-emitting diodes. In this research, we studied the fluorescence properties of a red organic fluorophore, employing perylene bisimide derivatives applicable to hybrid LEDs. The solubility, thermal stability, and luminous efficiency are important characteristics of organic fluorophores for use in hybrid LEDs. The perylene fluorescent compounds (1A and 1B) were prepared by the reaction of 4-bromophenol and 4-iodophenol with N,N'-bis(4-bromo-2,6-diisopropylphenyl)-1, 6,7,12-tetrachloroperylene-3,4,9,10-tetracarboxyl diimide (1) in the presence of dimethyl formaldehyde (DMF) at $70^{\circ}C$. The synthesized derivatives were characterized by using $^1H-NMR$, FT-IR, UV/Vis absorption and PL spectra, and TGA analysis. Compounds 1A and 1B showed absorption and emission at 570 nm and 604 nm in the UV/Vis spectrum. We also documented favorable solubility and thermal stability characteristics of the perylene fluorophores in our work. Perylene fluorophore 1, with the 4-bromophenol substituent 1A, exhibited particularly good thermal stability and solubility in organic solvents.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.45-45
• /
• 2009

This paper describes the formation of porous 3C-SiC by anodization. 3C-SiC thin films were deposited on p-type Si(100) substrates by APCVD using HMDS (Hexamethyildisilane: $Si_2(CH_3)_6$). UV-LED(380 nm) was used as a light source. The surface morphology was observed by SEM and the pore size was increased with increase of current density. Pore diameter of 70 ~ 90 nm was achieved at 7.1 $mA/cm^2$ current density and 90 sec anodization time. FT-IR was conducted for chemical bonding of thin film and porous 3C-SiC. The Si-H bonding was observed in porous 3C-SiC around wavenumber 2100 $cm^{-1}$. PL shows the band gap enegry of thin film (2.5 eV) and porous 3C-SiC (2.7 eV).

• Natural Product Sciences
• /
• v.24 no.1
• /
• pp.36-39
• /
• 2018

Phytochemical analysis of Boehmeria nivea (Bn) leaves by medium pressure liquid chromatography led to the isolation of a flavonoid glycoside identified by spectroscopic analysis as rutin. The amount of rutin in the leaves of Bn harvested from nine regions in South Korea (Bn 1-9) which were collected on the months of June, July, August, and September was determined by HPLC-UV analysis. A gradient elution program that utilizes a $Discovery^{(R)}$ C18 ($4.6{\times}250mm$, $5{\mu}m$) column and mobile phase composed of 1% acetic acid-water: acetonitrile (90:10 to 60:40 for min) was followed. The injection volume and flow rate were $10{\mu}l$ and 1 mL/ min, respectively. UV detection was set at 350 nm. Results show that Bn-8 harvested in September reported the highest content of rutin among the samples analyzed. This study provides a basis for the optimal harvest time of Bn which maximizes the yield of rutin.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.207-207
• /
• 2010

Both ZnO and GaN have excellent physical properties in optoelectronic devices such as blue light emitting diode (LED), blue laser diode (LD), and ultra-violet (UV) detector. The ZnO/GaN heterostructure, which has a potential to achieve the cost efficient LED technology, has been fabricated by using radio frequency (RF) sputtering, pyrolysis, metal organic chemical vapor deposition (MOCVD), direct current (DC) arc plasmatron, and pulsed laser deposition (PLD) methods. Among them, the PLD system has a benefit to control the composition ratio of the grown film from the mixture target. A 500-nm-thick ZnO film was grown by PLD technique on c-plane GaN/sapphire substrates. The post annealing process was executed at some varied temperature between from $300^{\circ}C$ to $900^{\circ}C$. The morphology and crystal structural properties obtained by using atomic force microscope (AFM) and x-ray diffraction (XRD) showed that the crystal quality of ZnO thin films can be improved as increasing the annealing temperature. We will discuss the post-treatment effect on film quality (uniformity and reliability) of ZnO/GaN heterostructures.

• Korean Journal of Materials Research
• /
• v.12 no.3
• /
• pp.215-219
• /
• 2002

For the purpose of annihilating tumor in body, hematoporphyrin as a photosensitizer was coated onto magnetic particles of $Fe_3O_4$ prepared by coprecipitation which could be concentrated around the tumor by magnetic field. The photosensitizer was applied differently before, during and after adsorbing the 1st surfactant on the particles. Its added amount was $5{\times}10^{-4}/mol$, and the coating reaction proceeded at temperatures of 60, 70 and 8$0^{\circ}C$. The amounts of photosensitizer coated on the magnetic particles were obtained by calculating an optical density with the maximum UV spectrum. As a result of the UV analysis, the coating amount of photosensitizer increased with higher reaction temperatures. When applied at 8$0^{\circ}C$ after adsorbing the 1st surfactant, the photosensitizer was coated with a maximum value of $3.8{\times}10^{-3}/mo1/$\ell$$. The TGA analysis revealed that the ferrofluids included the particles of 30.115 g/$\ell$. It was suggested that the magnetite particles was coated with photosensitizer of $1.26{\times}10^{-4}/mo1/g$. A small-sized device for magnetic field and light emission was designed, in which LED sheets coverts the permanent magnet of Nd-Fe-B. The LED sheet was connected in series circuit and also protected with a silicon tube. The power was supplied with rechargable battery of 9V and 100-120mA.

• Environmental Engineering Research
• /
• v.18 no.1
• /
• pp.21-28
• /
• 2013

In this study, the applicability of visible light-emitting-diodes (LEDs) to the photocatalytic degradation of indoor-level trichloroethylene (TCE) and perchloroethylene (PCE) over N-doped $TiO_2$ (N-$TiO_2$) was examined under a range of operational conditions. The N-$TiO_2$ photocatalyst was calcined at $650^{\circ}C$ (labeled N-650) showed the lowest degradation efficiencies for TCE and PCE, while the N-$TiO_2$ photocatalysts calcined at $350^{\circ}C$, $450^{\circ}C$, and $550^{\circ}C$ (labeled as N-350, N-450, and N-550, respectively) exhibited similar or slightly different degradation efficiencies to those of TCE and PCE. These results were supported by the X-ray diffraction patterns of N-350, N-450, N-550, and N-650. The respective average degradation efficiencies for TCE and PCE were 96% and 77% for the 8-W lamp/N-$TiO_2$ system, 32% and 20% for the violet LED/N-$TiO_2$ system, and ~0% and 4% for the blue LED/N-$TiO_2$ system. However, the normalized photocatalytic degradation efficiencies for TCE and PCE for the violet LED-irradiated N-$TiO_2$ system were higher than those from the 8-W fluorescent daylight lamp-irradiated N-$TiO_2$ system. Although the difference was not substantial, the degradation efficiencies exhibited a decreasing trend with increasing input concentrations. The degradation efficiencies for TCE and PCE decreased with increasing air flow rates. In general, the degradation efficiencies for both target compounds decreased as relative humidity increased. Consequently, it was indicated that violet LEDs can be utilized as energy-efficient light sources for the photocatalytic degradation of TCE and PCE, if operational conditions of N-$TiO_2$ photocatalytic system are optimized.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.1
• /
• pp.11-14
• /
• 2012

The AlGaN layer has direct wide bandgaps ranging from 3.4 to 6.2 eV. Nowadays, it is becoming more important to fabricate optical devices in an UV region for the many applications. The high quality AlGaN layer is necessary to establish the UV optical devices. However, the growth of AlGaN layer on GaN layer is difficult due to the lattice mismatch and difference thermal expansion coefficient between GaN layer and AlGaN layer. In this paper, we attempted to grow the LED structure on GaN template by mixed-source HVPE method with multi-sliding boat system. We tried to find the optical and lattice transition of active layer by control the Al content in mixed-source. For the growth of epi layer, the HCl and $NH_3$ gas were flowed over the mixed-source and the carrier gas was $N_2$. The temperature of source zone and growth zone was stabled at 900 and $1090^{\circ}C$, respectively. After the growth, we performed the x-ray diffraction (XRD) and electro luminescence (EL) measurement.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.6
• /
• pp.487-490
• /
• 2010

This paper describes the elecrtical and optical characteristics of $N_2$ doped porous 3C-SiC films. Polycrystalline 3C-SiC thin films are anodized by $HF+C_2H_5OH$ solution with UV-LED exposure. The growth of in-situ doped 3C-SiC thin films on p-type Si (100) wafers is carried out by using APCVD (atmospheric pressure chemical vapor deposition) with a single-precursor of HMDS (hexamethyildisilane: $Si_2(CH_3)_6)$. 0 ~ 40 sccm $N_2$ was used for doping. After the growth of doped 3C-SiC, porous 3C-SiC is formed by anodization with $7.1\;mA/cm^2$ current density for anodization time of 60 sec. The average pore diameter is about 30 nm, and etched area is increased with $N_2$ doping rate. These results are attributed to the decrease of crystallinity by $N_2$ doping. Mobility is dramatically decreased in porous 3C-SiC. The band gaps of polycrystalline 3C-SiC films and doped porous 3C-SiC are 2.5 eV and 2.7 eV, respectively.

• Natural Product Sciences
• /
• v.13 no.1
• /
• pp.11-16
• /
• 2007

Alcoholic extract of Spathodea campanulata P. aerial parts, and two of the isolated fractions from celite column showed strong antioxidant activity (92, 94 & 89% RSA, Radical Scavenging Activity). Phytochemical investigation of chloroform/EtOAc faction of this column led to the isolation of phenolic acids, caffiec acid (1), and ferulic acid (2), fraction EtOAc/MeOH on further fractionation afforded 3 Flavonoids, kampferol 3-O-glucoside (3), quercetin 3-methyl ether (4) and 8-methoxy kampferol 3-O-glucoside (5). The isolated constituents were identified by co chromatography with authentic samples, TLC, PC., UV, MS and $^1H-NMR$. Also the lipoidal matter of the plant was studied. The unsaponifiable matter was found to be mixture of hydrocarbons from $(C_{14}-C_{28})$, cholesterol, campasterol, stigmasterol, and ${\alpha}-amyrin$. Fatty acid methyl esters were found to contain 12 fatty acids. The fatty acids containing $C_{18}$ farmed ca.65% of the total mixture.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.123-123
• /
• 2017

식물공장 내 작물의 생육은 제공되는 인공광원의 광원 및 광질에 영향을 받으며, 광흡수 파장에 따라 다르다. 또한 광합성에 효과적인 형태의 빛의 계속적인 빛의 조사보다는 광 펄스를 조절하여 공급하여 준다면 더욱더 효과적인 생육 환경을 제공해 줄 수 있다. 식물의 최적 생장을 위해 특정 파장대의 빛을 선택적으로 조사할 수 있는 LED특성을 사용하여 UV광원을 포함한 인공광원의 펄스폭 변조에 따른 적치마 상추의 생육특성을 알아보고자 하였다. 광환경은 Red(660 nm), Blue(450 nm), UV(395 nm) LED를 8:1:1 비율로 광량 $160{\mu}mol{\cdot}m^2{\cdot}s^{-1}$, 주파수 1.25, 2.5, 3.75, 5.0 kHz로 조사하여 주었으며, 온도 $20{\sim}23^{\circ}C$, 습도 50~60%, $CO_2$농도 1,000 ppm으로 조성하여 주었다. 아시아종묘 적치마상추를 파종 후 18일 째 되는날 정식, 정식 후 14일 28일 째 되는날 SPAD, 지상부 지하부의 생체중 및 건물중, 엽폭, 엽장을 측정하였으며, 측정한 엽폭과 엽장을 이용하여 엽형지수 산출, 지상부 지하부 생체중 값을 이용하여 S/R율을 산출하였다. SPAD 측정결과 생육시기가 증가할수록 SPAD함량은 감소하였으며, 1.25와 2.5 kHz에서 생육 시기 증가에 대한 SPAD함량 감소가 컸고, 3.75와 5.0 kHz의 경우 SPAD함량의 감소량은 작았다. 지상부 생체중은 3.75 kHz에서 121.51 g으로 가장 높은 값을 나타냈으며, 2.5, 1.75, 5.0 kHz 순으로 높은 값을 나타났다. 지하부 생체중의 경우 3.75 kHz에서 31.31 g으로 가장 높은 값을 나타냈으며 2.5, 5.0, 1.25 kHz 순으로 높게 나타났다. 엽형지수는 생육 시기가 증가에 따라 감소하는 것으로 나타났으며, 1.75, 2.5, 5.0, 3.75 kHz 순으로 크게 나타났다. 지상부 건물중 측정결과는 지상부 생체중 결과와, 지하부 건물중의 측정결과는 지하부 생체중 결과와 동일하였다. S/R율은 1.75 kHz를 제외하고 생육시기가 증가할수록 S/R율은 감소하는 것으로 나타났으며, 주파수가 높아질수록 S/R율은 감소하는 것으로 나타났다. 엽형지수는 엽폭/엽장으로 엽형지수를 산출한 결과로 값이 작을수록 엽폭이 넓은 형태를 의미하며, 생체중값이 가장 크게 나타났던 3.75 kHz에서 엽형지수의 값이 가장 낮게 나타났으며 3.75 kHz를 제외하고 주파수가 높을수록 엽형지수의 값이 낮게 나타났다. 이에 주파수에 따른 적상추의 생육은 3.75 kHz에서 가장 좋은 것으로 판단할 수 있었다.