• 한국전기전자재료학회논문지
• /
• 제30권9호
• /
• pp.577-582
• /
• 2017

The white light of a hybrid LED is obtained by using red and green organic fluorescent layers made of polymethylmethacrylate (PMMA) films, which function as color down-conversion layers of blue light-emitting diodes. In this research, we studied the fluorescence properties of a red organic fluorophore, employing perylene bisimide derivatives applicable to hybrid LEDs. The solubility, thermal stability, and luminous efficiency are important characteristics of organic fluorophores for use in hybrid LEDs. The perylene fluorescent compounds (1A and 1B) were prepared by the reaction of 4-bromophenol and 4-iodophenol with N,N'-bis(4-bromo-2,6-diisopropylphenyl)-1, 6,7,12-tetrachloroperylene-3,4,9,10-tetracarboxyl diimide (1) in the presence of dimethyl formaldehyde (DMF) at $70^{\circ}C$. The synthesized derivatives were characterized by using $^1H-NMR$, FT-IR, UV/Vis absorption and PL spectra, and TGA analysis. Compounds 1A and 1B showed absorption and emission at 570 nm and 604 nm in the UV/Vis spectrum. We also documented favorable solubility and thermal stability characteristics of the perylene fluorophores in our work. Perylene fluorophore 1, with the 4-bromophenol substituent 1A, exhibited particularly good thermal stability and solubility in organic solvents.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.225-225
• /
• 2013

Nanostructured noble metals have been attractive for their unusual optical properties and are widely utilized for various purposes. The optical properties mainly originating from collective electron oscillation can assist direct energy conversion via surface plasmon resonances. Here, we investigated the effect of surface plasmons of silver nanowires on the generation of hot electrons. It is reported that the surface plasmons of silver nanowires exhibit longitudinal and transverse modes, depending on the aspect ratio of the nanowires. In order to measure the hot electron flow through the metallic nanowires, chemically modified Au/TiO2 Schottky diodes were employed as the electric contact. The silver nanowires were deposited on a Au metal layer via the spray method to control uniformity and the amount of silver nanowire deposited. We measured the hot electron flow generated by photon absorption on the silver nanowires deposited on the Au/TiO2 Schottky diodes. The incident photon-to-current efficiency was measured a function of the photon energy, revealing two polarization modes of siliver nanowires: transverse and longitudinal modes. UV-Vis spectra exhibited two polarization modes, which are also consistent with the photocurrent measurements. Good correlation between the IPCE and UV-vis measurements suggests that hot electron measurement on nanowires on nanodiodes is a useful way to reveal the intrinsic properties of surface plasmons of nanowires.

• Bulletin of the Korean Chemical Society
• /
• 제31권8호
• /
• pp.2170-2174
• /
• 2010

The surfaces of $TiO_2$ and ZnO nanoparticles have been modified by gold (Au) nanoparticles by a reduction method in solution. Their interfacial electronic structures and optical absorptions have been studied by depth-profiling X-ray photoelectron spectroscopy (XPS) and UV-vis absorption spectroscopy, respectively. Upon Au-modification, UV-vis absorption spectra reveal a broad surface plasmon peak at around 500 nm. For the as-prepared Au-modified $TiO_2$ and ZnO, the Au $4f_{7/2}$ XPS peaks exhibit at 83.7 and 83.9 eV, respectively. These are due to a charge transfer effect from the metal oxide support to the Au. For $TiO_2$, the larger binding energy shift from that (84.0 eV) of bulk Au could indicate that Au-modification site of $TiO_2$ is different from that of ZnO. On the basis of the XPS data with sputtering depth, we conclude that cationic (1+ and 3+) Au species, plausibly $Au(OH)_x$ (x = 1-3), commonly form mainly at the Au-$TiO_2$ and Au-ZnO interfaces. With $Ar^+$ ion sputtering, the oxidation state of Ti dramatically changes from 4+ to 3+ and 2+ while that (2+) of Zn shows no discernible change based on the binding energy position and the full-width at half maximum (FWHM).

• Korean Chemical Engineering Research
• /
• 제43권4호
• /
• pp.511-516
• /
• 2005

본 실험에서는 다중 유화법과 calcium chloride를 사용한 가교반응에 의해 향오일이 함유된 키토산 마이크로캡슐을 제조하였고, 향오일의 농도와 교반속도 변화에 따른 마이크로캡슐의 특성을 조사하였다. 마이크로캡슐의 크기와 형태는 주사전자현미경(SEM)을 이용하여 관찰하였다. 실험 결과, 마이크로캡슐의 평균 입자크기는 교반속도가 증가함에 따라 작아지는 것을 확인할 수 있었다. 키토산 마이크로캡슐에 대한 심물질의 함입은 FT-IR에 의해 $1,460cm^{-1}$와 $2,960cm^{-1}$에서 향오일의 특정 피크를 통하여 확인하였다. 또한, 마이크로캡슐의 향오일 방출 거동을 살펴보기 위해 UV/vis. 흡광광도법으로 흡광도를 측정하여 방출 거동을 관찰하였다. 향오일의 방출 거동은 향오일 농도의 경우 함유량이 증가할수록 방출량은 증가하였고 pH의 경우 pH가 감소할수록 방출량은 증가하였다.

• 한국의류산업학회지
• /
• 제16권3호
• /
• pp.492-498
• /
• 2014

Lotus(Nelumbo nucifera gaertn) is intimate plant to many people that it has clean and noble characteristics despite growth in the mud. Especially Lotus seedpods, byproduct of lotus, are rich in oligometric procyanidins and could be a new source of procyanidins. Procyanidins, also known as condensed tannins, are a class of polyphenols. In other words lotus seedpod contains plenty of tannins. Commonly tannins colorants could increase adsorption and fastness properties in fabric dyeing. This study was made to investigate colorants characteristics of lotus seedpod and various colorfastness properties of dyed silk fabrics. The wavelength of maximum absorption of lotus seedpod solution appeared at 273.5 nm from UV-vis spectrophotometer. From the results of FT-IR spectra measurements, IR absorption band of lotus seedpod colorants appeared at $3415cm^{-1}$, $2900cm^{-1}$ and $1620cm^{-1}$ by tannin structure. And tannin ingredient contents was the highest at pH 9 and flavonoid at pH 11. Lotus seedpod colorants showed relatively good affinity at pH 3 on silk fabrics and optimum dyeing temperature and time for silk was for 50 min, at $80^{\circ}C$. K/s of Light fastness according to different washing method was the highest at process including ironing and ${\Delta}E$ was the lowest. All of fastness(Light rubbing laundering perspiration dry cleaning) showed excellent results over 4 or 4-5 grades.

• 폴리머
• /
• 제27권5호
• /
• pp.449-457
• /
• 2003

액중건조법을 사용하여 PCL/PEO 마이크로캡슐을 제조하여 형태적 분석 및 제조 조건에 따른 특성을 살펴보고 거동을 통하여 약물 전달 체계로서의 가능성을 고찰하였다. 유화제의 종류 및 농도 그리고 교반 속도에 따른 마이크로캡슐의 입경과 형태의 변화에 대하여 광학 현미경과 SEM을 사용하여 관찰하였다. 또한 접촉각 측정을 통해 PCL/PEO와 약물간의 계면에서의 부착일을 살펴보았으며, 방출 거동을 알아보기 위해 UV/vis. 흡광 광도법으로 흡광도를 측정 하여 용출된 약물의 양을 정량하였다. 그 결과, 마이크로캡슐의 평균 입경이 170 nm∼68 $\mu$m인 구형의 형태를 나타내었으며, PEO의 함량이 증가함에 따라 친수성기가 증가하여 물에 대한 부착일이 증가함을 알 수 있었다. 또한 약물 방출 실험을 통하여 PEO의 함량을 높게 하고 교반 속도를 빠르게 하여 제조한 마이크로캡슐의 약물 방출이 상당히 빠름을 알 수 있었다 이는 PEO의 함량이 증가함에 따라 친수성기가 증가하고 계면력이 증가하기 때문이라 사료된다.

• 공업화학
• /
• 제10권6호
• /
• pp.902-906
• /
• 1999

메틸셀루로스를 호스트고분자로 하고 copper(II) percolate를 산화제로 사용하여 기상상태에서 직접중합방법으로 전도성 복합필름을 합성하였다. 필름으로서 우수한 성형성과 기계강도를 갖고 있는 메틸셀루로즈는 PVA와 키토산과는 달리 피롤에 대하여 높은 친화성을 나타내어서 기상중합시 호스트고분자로 적합하였다. 기상중합법으로 합성된 폴리피롤은 복합재료 내에서 전도성네트워크를 형성하여 전도성 복합필름의 전기전도도는 $10^{-1}-10^{-7}S/cm$를 나타내었다. 피롤이 호스트고분자 내에서의 폴리피롤로 중합이 되는 정도를 UV-vis분광계로 확인하였다. 전도성 복합필름의 전기전도도와 기계강도는 산화제의 농도와 합성시간에 크게 의존하였다. TGA분석결과는 호스트고분자 내에 형성된 폴리피롤은 복합재료의 열적 안정성에 영향을 미치지 않는다. 전자현미경 분석결과 폴리피롤이 복합재료 내에 균일하게 침투하여 분산되어 있음을 나타내었다. DMA를 사용하여 폴리피롤과 호스트고분자와의 상용성을 조사하였으며 dynamic mechanical analysis(DMA) 분석결과 복합재료 내에서 폴리피롤의 함량이 증가되면서 상용성이 점진적으로 저하되었다.

• 공업화학
• /
• 제16권4호
• /
• pp.588-593
• /
• 2005

본 실험에서는 화학적으로 표면처리된 실리카와 니페디핀을 함유하는 PCL 마이크로캡슐을 O/W 액중건조법을 이용하여 제조하였다. 마이크로캡슐에 대한 심물질의 함입은 FT-IR을 사용하여 측정하였고, 마이크로캡슐의 표면 형태는 주사전자현미경을 통하여 관찰하였다. 또한, 마이크로캡슐의 니페디핀 방출 거동은 UV/Vis. 흡광광도법으로 흡광도를 측정하여 살펴보았다. 실험 결과, 니페디핀의 C=O 결합에 의한 $1682cm^{-1}$ 신축진동 피크가 마이크로 캡슐에서 나타나는 것을 확인할 수 있었다. 마이크로캡슐의 평균 입자크기는 교반 속도가 증가함에 따라 감소하였다. 그리고 실리카를 염기성 용액으로 처리한 경우 니페디핀의 흡착량과 방출 속도가 감소하였음을 확인할 수 있었으며, 이는 표면 염기도의 증가로 인해 실리카 표면의 비표면적이 감소되고 산-염기 상호작용이 증가되었기 때문으로 판단된다.

• Bulletin of the Korean Chemical Society
• /
• 제33권11호
• /
• pp.3761-3766
• /
• 2012

$Ag_2Se$-Graphene/$TiO_2$ composite was synthesized by a facile sonochemical method. The as-prepared products were characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM) with energy dispersive X-ray (EDX) analysis, transmission electron microscopy (TEM) and UV-vis diffuse reflectance spectrophotometer. During the reaction, both of the reduction of graphene oxide and loading of $Ag_2Se$ and $TiO_2$ particles were achieved. The as-prepared $Ag_2Se$-Graphene/$TiO_2$ composites possessed great adsorptivity of dyes, extended light absorption range, and efficient charge separation properties simultaneously. Hence, in the photodegradation of rhodamine B (Rh.B), a significant enhancement in the reaction rate was observed with $Ag_2Se$-Graphene/$TiO_2$ composites, compared to the pure $TiO_2$. The high activity can be attributed to the synergetic effects of high charge mobility, and red shift in absorption edge of $Ag_2Se$-Graphene/$TiO_2$ composites.

• Bulletin of the Korean Chemical Society
• /
• 제31권10호
• /
• pp.2923-2928
• /
• 2010

This study examined the synthesis of the crystal structure of bis(2,2'-bipyridine)nitrato zinc (II) nitrate, $[Zn(bipy)_2(NO_3)]^+NO_3^-$ using a microwave treatment at 300 W and 60 Hz for the application to dye-sensitized solar cells. The simulated complex structure of the complex was optimized with the density functional theory calculations for the UV-vis spectrum of the ground state using Gaussian 03 at the B3LYP/LANL2DZ level. The structure of the acquired complex was expected a penta-coordination with four nitrogen atoms of bipyridine and the oxygen bond of the $NO_3^-$ ion. The reflectance UV-vis absorption spectra exhibited two absorptions (L-L transfers) that were assigned to the transfers from the ligand ($\sigma$, $\pi$) of $NO_3$ to the ligand ($\sigma^*$, $\pi^*$) of pyridine at around 200 - 350 nm, and from the non-bonding orbital (n) of O in $NO_3$ to the p-orbital of pyridine at around 450 - 550 nm, respectively. The photoelectric efficiency was approximately 0.397% in the dye-sensitized solar cells with the nanometer-sized $TiO_2$ at an open-circuit voltage (Voc) of 0.39 V, a short-circuit current density (Jsc) of $1.79\;mA/cm^2$, and an incident light intensity of $100\;mW/cm^2$.