• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2B
• /
• pp.80-90
• /
• 2006

WSN(Wireless Sensor Network) performs to detect and collect environmental information for one purpose. As examples, WSN is applicable for home network, patient management of a hospital, logistics management, status detection during the war and so on. The WSN is composed of a sink node and several sensor nodes and has a constraint in an aspect of energy consumption caused by limited battery resource. So many required mechanisms in WSN should consider the remained energy condition. A routing mechanism is requested to deliver the collected information to a sink considering energy efficiency in WSN. There have been many researches to establish (a) route(s) for data delivery to the sink. In this paper, we propose establishment of efficient routes. We proposed a uniform routing mechanism together with considering energy efficiency. For the routing, we define energy probability as routing metrics information and Performs suppression of exchange of control messages. In addition, we derive to uniformly consume the energy of the sensor node when establishing the routes. Also, we evaluate and analyze the energy efficiency for proposed mechanisms through NS-2 simulator.

• Journal of Korea Multimedia Society
• /
• v.13 no.8
• /
• pp.1221-1234
• /
• 2010

MANET(Mobile Ad-hoc Network)s have been researched primary at routing protocols and at the guarantees of QoS(Quality of Service) for mobile environments. Otherwise the Ubiquitous Sensor Networks (USNs) have some limitations in power energies and in processing of sensing data, as well as their network topologies are frequently changed by fading off and node failures. Thus we should redesign network protocols with concerning to energy efficiency for the USNs above all. In this paper, we focus on the protocol interface for managing for USNs based on the surveys. And then we figure the topology of USNs out and design the network protocol interface to make power saved, with data gathering and processing more efficient using our designed packet structures.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.5
• /
• pp.887-898
• /
• 2009

Conventional routing protocols proposed for wireless sensor networks (WSNs) cannot fully accommodate the characteristics of WSNs. In particular, although it is possible to largely obtain benefits in the solution of energy consumption and global identification problems through applying position information, there are few protocols that actively apply such position information. In the case of geographical and energy aware routing (GEAR) that is a typical algorithm, which uses position information, it does not fully represent the characteristics of WSNs because it is limited to forward query messages and assumed as fixed network environments. The routing protocols proposed in this paper defines the direction of data, which is routed based on the position information of individual and target nodes, in which each node configures its next hop based on this direction and routes signals. Because it performs data-centric routing using position information, it does not require certain global identifications in order to verify individual nodes and is able to avoid unnecessary energy consumption due to the forwarding of packets by defining its direction.

• Journal of Advanced Navigation Technology
• /
• v.21 no.3
• /
• pp.306-311
• /
• 2017

In the future ubiquitous network, information will collect data from various sensors in the field. Since the sensor nodes are equipped with small, often irreplaceable, batteries with limited power capacity, it is essential that the network be energy-efficient in order to maximize its lifetime. In this paper, we propose an effective network routing method that can operate with low power as well as the transmission of data and information obtained from sensor networks, and identified the number of sensors with the best connectivity to help with the proper placement of the sensor. These purposes of this research are the development of the sensor middle-ware to integrate the maritime information and the proposal of the routing algorithm for gathering the maritime information of various sensors. In addition, for more secure ship navigation, we proposed a method to construct a sensor network using various electronic equipments that are difficult to access in a ship, and then construct a communication system using NMEA(the national marine electronics association), a ship communication standard, in the future.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.3
• /
• pp.93-99
• /
• 2008

Most of the current research works on high-technology is being carried on to provide ubiquitous services to people. To make that possible, ubiquitous computing networks should be deployed in the first place, where ubiquitous sensor network (USN) will take a very big role. This paper is devoted to introduce a new transmission technique to make USN more independent and reliable as an infra-structure for ubiquitous services. The proposed scheme can elevate the network performance by ensuring the reliability of data transmission. Especially, the proposed scheme can reduce network traffic and communication cost by detecting data error without additional data and communication. In addition, it has an advantage of using the legacy routing protocols.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1535-1541
• /
• 2009

In this paper, we suggest an efficient path searching algorithm that reduces the hop count when each node sends a data in ZigBee networks. As the hop count reduces, the network traffic is also reduces and leads to less energy consumption. This enables the sensor network live longer with limited node power. The proposed path searching algorithm consists of two sub-algorithms. One for upstream process and the other for downstream process. When a node selects its proper routing path, the node not only uses the information of the parent and child node, but it also uses the neighbor nodes for each node. In the simulation, we changed various network environment factors such as network parameters, number of nodes, and number of neighbor nodes and observed their performances. We compare the performance to the previous ZigBee Tree routing algorithm with separate two algorithms, the upstream and the downstream, and then compare the performance when all two algorithms are applied.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.3
• /
• pp.155-163
• /
• 2007

In this paper, Though sensors of Ubiquitous Middle-ware System based on RFID/USN can usually be reacted from six mouths to two years, they can be exhausted their power of storage battery only one day by communication rates and ranges. That is, the lifetime of sensor node is depended on how much spending power under wireless communication that can communicate its sensing data to its destination. Therefore, it is necessary that each sensor should be designed the Routing path to its destination, in order to remote collecting data. But, in order to improve lifetime of sensor node and modify inner setting, it is opposite to simple searching path method of sensor node by entering external commands. accordingly, 1:n sensor arrangement of n form command and data send-receive that is possible simulation do without interference other sensors and research to different sensor data analysis and conversion ways to convert Sensing data that accept from sensors to actuality information.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.242-249
• /
• 2009

High-rise construction sites, especially those situated in spatially constrained urban areas, have difficulties in timely delivery of materials. Modern techniques such as Just-in-time delivery, and use of information technology such as Project Management Information System (PMIS), are targeted to improve the efficiency of the logistics. Such IT-driven management techniques can be further benefited from state-of-the-art devices such as Radio Frequency Identification (RFID) tags and Ubiquitous Sensor Networks (USN), which has resulted in notable achievements in automated logistics management at the construction sites. Based on those achievements, this research develops USN hardware toolkits for construction lifts, which aims to be automated the vertical material delivery by sensing the material information and routing it automatically to the right place. The gathered information from the sensors can also be used for monitoring the overall status. The developed system will be tested in the actual high-rise construction sites to assess the system's feasibility. The proposed system is being implemented using Zigbee communication modules and RFID sensor networks which will communicate with the intelligent palette system (previously developed by the authors). To support the system, a lift-mountable intelligent toolkit is under development. Its feasibility test will be conducted by applying the implemented system to a test bed and then analyzing efficiency of the system and the toolkit. The collected test data will be provided as a basis of autonomous vertical transport equipment development. From this research, efficient management of the material lift is expected with increased accuracy, as well as better management of overall construction schedule benefited from the system. Further research will be expected to develop a smart construction lift, which will eliminate the need for human supervision, thus enabling a real 'autonomous' operation of the system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.3
• /
• pp.623-628
• /
• 2009

The emergence of compact and low-power wireless communication sensors and actuators in the technology supporting the ongoing miniaturization of processing and storage allows for entirely the new kinds of embedded systems. These systems are distributed and deployed in environments where they may have been designed into a particular control method, and are often very dynamic. Collection of devices can communicate to achieve a higher level of coordinated behavior. Wireless sensor nodes deposited in various places provide light, temperature, and activity measurements. Wireless sensor nodes attached to circuits or appliances sense the current or control the usage. Together they form a dynamic and multi-hop routing network connecting each node to more powerful networks and processing resources. Wireless sensor networks are a specific-application and therefore they have to involve both software and hardware. They also use protocols that relate to both applications and the wireless network. Wireless sensor networks are consumer devices supporting multimedia applications such as personal digital assistants, network computers, and mobile communication devices. Wireless sensor networks are becoming an important part of industrial and military applications. The characteristics of modem embedded systems are the capable of communicating adapting the different operating environments. In this paper, We designed and implemented sensor network system which shows through host PC sensing temperature and humidity data transmitted for wireless sensor nodes composed wireless temperature and humidity sensor and designs sensor nodes using embedded system with the intention of studying USN.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.445-450
• /
• 2011

In this paper, we describe the implementation of an wireless sensor network testbed. We developed a web-based sensor network gateway and enhanced the Surge program which is used for sending and routing of packets in the sensor field. The developed program can transmit the source data of sensor nodes to the sink node via multi-hop routing, and deliver user commands to actuate sensor related equipments. Moreover, in this testbed, the data transport path from a node to the sink can be monitored. Thus we can approximate the network topology and the relative positions of sensor nodes. We also describe an application of the testbed that is used for controlling a remote robot.