• Journal of Biosystems Engineering
• /
• 제26권6호
• /
• pp.545-552
• /
• 2001

Nondestructive methods such as ultrasonic and magnetic resonance imaging systems have many advantages but still much expensive. And they do not give exact color information and may miss some details. If it is allowed to destruct a biological object to obtain interior and exterior informations, 3D image visualization model from a series of sliced sectional images gives more useful information with relatively low cost. In this paper, a PC based automatic 3D visualization system is presented. The system is composed of three modules. The first module is the handling and image acquisition module. The handling module feeds and slices a cylindrical shape paraffin, which holds a biological object inside the paraffin. And the paraffin is kept being solid by cooling while being handled. The image acquisition modulo captures the sectional image of the object merged into the paraffin consecutively. The second one is the system control and interface module, which controls actuators for feeding, slicing, and image capturing. And the last one is the image processing and visualization module, which processes a series of acquired sectional images and generates a 3D volumetric model. To verify the condition for the uniform slicing, normal directional forces of the cutting edge according to the various cutting angles were measured using a strain gauge and the amount of the sliced chips were weighed and analyzed. Once the 3D model was constructed on the computer, user could manipulate it with various transformation methods such as translation, rotation, and scaling including arbitrary sectional view.

• 한국항행학회논문지
• /
• 제20권6호
• /
• pp.503-510
• /
• 2016

최근 이동형 글로벌 광대역 통신 및 위성기반의 양방향 인터넷 서비스에 대한 수요가 증가함에 따라 ESIM (earth station in motion)이라는 새로운 형태의 위성 터미널이 개발되고 있다. 이 서비스는 ITU-R Resolution 158(WRC-15)에서 FSS 업링크에 27.5-29.5 GHz 대역사용을 고려하고 있어 동일대역에서 1순위 업무로 분배된 FS와의 간섭분석에 대한 연구가 요구되고 있다. 이에 본 논문에서는 ESIM이 기존의 FS(fixed service)에 미치는 간섭영향을 안테나의 포인팅 에러와 방위각을 고려하여 4 가지 시나리오에 대해 분석하였다. 그 결과 에러 초과확률 5% 및 10% 기준에서 앙각이 $20^{\circ}{\sim}40^{\circ}$에 따라 두 시스템간의 분리거리는 32~52 km 정도 요구되고 있다. 이에 분리거리를 최소화하면서 동일대역의 FS를 보호하기 위해서는 안테나 포인팅 에러뿐만 아니라 이동 터미널의 방위각을 제어할 수 있어야 한다.

• 항공우주시스템공학회지
• /
• 제9권2호
• /
• pp.25-33
• /
• 2015

Global market of unmanned aircraft(UA) is rapidly expending based on the versatile and efficient utility of the UA. Domestically many industries, universities and research institutes are trying to do research and development of the UA in various angle of aspect. In spite of these effort, all the participants of research and development of the UA has been suffering the difficulty of acquiring the airspace around vicinity of Goheung airfield for the flight test of UA. Although the current procedure of execution of the flight test of UA is set after acquiring the airspace by applying the NOTAM(Notice To Air Man) to the Ministry of Land, Infrastructure and Transport(MLIT) at least 7 days before the flight test and commencing with the publication of the NOTAM by MLIT, if the flight test is carried out as planned, changing or reapplying the NOTAM expends mort time and makes difficulty often. Therefore it is needed that a restricted airspace for the flight test of UA is established and make all the executioner of flight test uses the exclusive airspace without limitation. This research proposes the restricted airspace with short term and long term establish requirement of airspace separately. The short term requirement has been established with the airspace of 10 nm radius and 8,000 ft altitude in which the requirements of flight test can be carried out more than 90% without needs of supplement of the additional airspace. The long term has been established within the airspace of 30 nm radius which is the maximum Radio Line Of Sight(RLOS) and 8,000 ft altitude with exclusion of current air way, airport control area, approaching corridor to the airport, existing restricted area(RA) and Military Operating Area(MOA) for the purpose of minimizing inconvenience of the other airspace user. Once establishing the exclusive airspace for the flight test of UA, research and development of industries, universities and research institutes will be more vigorous and contributes to the national economy.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.647-650
• /
• 2006

Low temperature polycrystalline silicon (LTPS) technology using a high power laser have been widely applied to thin film transistors (TFTs) for liquid crystal, organic light emitting diode (OLED) display, driver circuit for system on glass (SOG) and static random access memory (SRAM). Recently, the semiconductor industry is continuing its quest to create even more powerful CPU and memory chips. This requires increasing of individual device speed through the continual reduction of the minimum size of device features and increasing of device density on the chip. Moreover, the flat panel display industry also need to be brighter, with richer more vivid color, wider viewing angle, have faster video capability and be more durable at lower cost. Kornic Systems Co., Ltd. developed the $KORONA^{TM}$ LTP/GLTP series - an innovative production tool for fabricating flat panel displays and semiconductor devices - to meet these growing market demands and advance the volume production capabilities of flat panel displays and semiconductor industry. The $KORONA^{TM}\;LTP/GLTP$ series using DPSS laser and XeCl excimer laser is designed for the new generation of the wafer & FPD glass annealing processing equipment combining advanced low temperature poly-silicon (LTPS) crystallization technology and object-oriented software architecture with a semistandard graphical user interface (GUI). These leading edge systems show the superior annealing ability to the conventional other method. The $KORONA^{TM}\;LTP/GLTP$ series provides technical and economical benefits of advanced annealing solution to semiconductor and FPD production performance with an exceptional level of productivity. High throughput, low cost of ownership and optimized system efficiency brings the highest yield and lowest cost per wafer/glass on the annealing market.

• 한국통신학회논문지
• /
• 제30권7A호
• /
• pp.603-610
• /
• 2005

기지국에서 추정된 채널 정보를 바탕으로 빔 성형을 하는 방식은 FDD 시스템과 같이 상/하향링크의 반송파 주파수가 일치하지 않을 경우 지향벡터가 어긋나게 되어 성능 저하가 발생하게 된다. 또한 수신 신호로부터 역방향 링크의 지향벡터를 얻는 blind 추정 기법 역시 하드웨어의 복잡도가 증가하는 단점이 있다. 이와 같은 문제점 해결을 위해 본 논문에서는 사용자의 입사각 추정을 통해 얻어진 상향링크의 무게함수를 하향링크에 적합한 형태로 보정함으로써 원하는 방향으로 빔 성형이 될 수 있도록 다수의 사용자 신호에 대해 공간 푸리에 변환을 수행함으로써 사용자 수의 증가에 따른 빔 성형의 복잡도 증가 문제를 개선해 주는 스마트 안테나 알고리즘을 제안하였다. 제안된 알고리즘은 CDMA 시스템의 하향링크 송신기에 적용한 후 수신 측에서 프레임 에러율로써 그 성능개선을 확인하였다. 그 결과 주파수 분할 방식의 시스템에서 제안된 알고리즘에 의한 성능 개선이 기존의 스마트안테나 시스템과 동일함을 확인 할 수 있었다.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권6호
• /
• pp.307-315
• /
• 2003

This paper proposes a novel simulation method of WPGS (Wind Power Generation System). The rotation speed control method of turbine under variable wind speed using the pitch control is proposed. Moreover, when wind speed exceeds the cut-out wind speed, the turbine will be stopped by controlling pitch angle to 90$^{\circ}$, otherwise it will be controlled to steady-state operation. For the purpose of effective simulation, the SWRW (Simulation method for WPGS using Real Weather condition) is used for the utility interactive WPGS simulation in this paper, in which those of three topics for the WPGS simulation: user-friendly method, applicability to grid-connection and the utilization of the real weather conditions, are satisfied. It is impossible to consider the real weather conditions in the WPGS simulation using the EMTP type of simulators and PSPICE, etc. External parameter of the real weather conditions is necessary to ensure the simulation accuracy. The simulation of the WPGS using the real weather conditions including components modeling of wind turbine system is achieved by introducing the interface method of a non-linear external parameter and FORTRAN using PSCAD/EMTDC in this paper. The simulation of long-term, short-term, over cut-out and under cut-out wind speeds will be peformed by the proposed simulation method effectively. The efficiency of wind power generator, power converter and flow of energy are analyzed by wind speed of the long-term simulation. The generator output and current supplied into utility can be obtained by the short-term simulation. Finally, transient-state of the WPGS can be analyzed by the simulation results of over cut-out and under cut-out wind speeds, respectively.

• 한국컴퓨터그래픽스학회논문지
• /
• 제13권4호
• /
• pp.29-36
• /
• 2007

본 논문은 모션 인식 분야 중 지체 장애인의 재활훈련과 같은 치료 분야를 위하여 적외선 발광 다이오드를 이용한 모션 분석과 이를 이용한 재활훈련 시스템을 제안한다. 본 시스템은 장애인 사용자의 특징점 위치에 무선 적외선 발광 다이오드 밴드를 착용하고 적외선 필터를 장치한 카메라로 좌표 값을 얻어낸 후 미리 정의되어있는 동작과의 일치 여부를 판별함으로 모션 분석이 가능하며 분석 과정이 비교적 간단하기 때문에 빠르고 정확한 모션인식이 가능하다. 또한 적외선 발광 다이오드의 특징점 좌표들만으로 동작을 판별하는 것이 아닌 각 특징점 좌표들을 꼭지점으로 가지는 다각형의 무게중심과 특징점 좌표들의 벡터를 구한 후 일정한 거리와 각도 구간으로 구분하고 각 발광 다이오드의 속한 구간을 알아낸다. 이 같은 모션 인식 알고리즘을 이용하여 장애인 치료 전문기관인 삼육 재활학교에서 구성한 재활훈련 시나리오의 동작에 대하여 실험을 수행한 결과 초당 20프레임 정도의 빠르면서도 98%에 가까운 정확한 인식률을 얻을 수 있다.

• 전기학회논문지
• /
• 제64권7호
• /
• pp.1056-1063
• /
• 2015

In this paper, we develop an interface for aerial photograph platform which consists of a quadrotor and a gimbal using the human body and the head posture. As quadrotors have been widely adopted in many industries such as aerial photography, remote surveillance, and maintenance of infrastructures, the demand of aerial video and photograph has been increasing remarkably. Stick type remote controllers are widely used to control a quadrotor, but this method is not an intuitive way of controlling the aerial vehicle and the camera simultaneously. Therefore, a new interface which controls the serial photograph platform is presented. The presented interface uses the human head movement measured by head-mounted display as a reference for controlling the camera angle, and the human body posture measured from Kinect for controlling the attitude of the quadrotor. As the image captured by the camera is displayed on the head-mounted display simultaneously, the user can feel flying experience and intuitively control the quadrotor and the camera. Finally, the performance of the developed system shown to verify the effectiveness and superiority of the presented interface.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 추계종합학술대회 B
• /
• pp.265-269
• /
• 2008

Home health care with compact wearable units sounds to be a convenient solution for the elderly people living independently. This paper presents a method to detect fall from the other activities of daily living and also to classify those activities. This kind of ambulatory monitoring enables them to get an emergency help in the case of the fatal fall event and can provide their general health status by observing the activities being performed in daily life. A tri-axial accelerometer sensor is used to get the acceleration anomalies associated with the user's movements. The three axis acceleration data are transferred to the base station sensor node via an IEEE 802.15.4 compliant zigbee module. The base station sensor node sends the data to base station PC for an offline processing. This work shows the feature set preparation using the principal component analysis (PCA) for the designing of neural network. The work includes the most common activities of daily living (ADL) like Rest, Walk and Run along with the detection of fall events from ADL. The angle from the vertical is found to be the most significant feature parameter for classification of fall while mean, standard deviation and FFT coefficients were used as the feature parameter for classifying the other activities under consideration. The accuracy for detection of fall events is 86%. The overall accuracy for ADL and fall is 94%.

• Composites Research
• /
• 제25권4호
• /
• pp.126-132
• /
• 2012

상용프로그램을 사용하여 복합재료 실린더를 설계할 때는 적층 각과 적층 수에 따른 node 수의 증가로 해석하는데 오랜 시간이 걸리기 때문에 본 논문은 LabVIEW를 사용하여 재료의 물성치, 적층각, 적층 수 등을 입력하여 빠른 시간에 응력분포를 구할 수 있는 GUI 프로그램을 개발하여 초기설계시 설계가능영역을 빠른 시간 내에 살펴볼 수 있도록 하였다. 자긴가공된 특수강 실린더의 응력분포와 내압을 받는 특수강/복합재 실린더의 응력분포는 MSC Nastrsn/Patran v.2010 사용하여 값을 비교하였고, 복합재료 실린더의 응력분포는 선행 연구된 값과 비교하여 검증하였다. 또한 프로그램을 사용하여 내압을 받는 자긴가공된 특수강/복합재 실린더의 응력분포를 살펴봄으로써 설계초기단계에서 경향성 검토를 쉽게 할 수 있어 초기설계에 유용하게 사용될 것으로 사료된다.