Composites Research

The Korean Society for Composite Materials (한국복합재료학회)
권호 표지
DOI QR코드

DOI QR Code

Analysis of Steel/composite Cylinder by GUI Program

GUI를 이용한 특수강/복합재 이중구조 후육실린더 해석

  • 김치완 (부산대학교 항공우주공학과 대학원) ;
  • 김위대 (부산대학교 항공우주공학과)
  • Received : 2012.06.08
  • Accepted : 2012.08.16
  • Published : 2012.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

It is useful to have a quick analysis program in early design process for feasibility studies of composite cylinder because it takes long time and is not cost effective by commercial programs. In this paper, a GUI program is developed to calculate the stress distribution in a fast manner with the properties, the orientation angle and the stacking sequence of composite material using LabVIEW. The stress distributions of an autofrettaged cylinder and a composite cylinder with internal pressure are compared with the results by MSC Nastran/patran. The stress distribution of steel/composite cylinder is compared with the values of existing studies, and is proved. Furthermore, by calculating the stress distribution of an autofrettaged steel/composite cylinder, the stress distribution is estimated, and the program will be useful in an early design phase for feasibility studies.

상용프로그램을 사용하여 복합재료 실린더를 설계할 때는 적층 각과 적층 수에 따른 node 수의 증가로 해석하는데 오랜 시간이 걸리기 때문에 본 논문은 LabVIEW를 사용하여 재료의 물성치, 적층각, 적층 수 등을 입력하여 빠른 시간에 응력분포를 구할 수 있는 GUI 프로그램을 개발하여 초기설계시 설계가능영역을 빠른 시간 내에 살펴볼 수 있도록 하였다. 자긴가공된 특수강 실린더의 응력분포와 내압을 받는 특수강/복합재 실린더의 응력분포는 MSC Nastrsn/Patran v.2010 사용하여 값을 비교하였고, 복합재료 실린더의 응력분포는 선행 연구된 값과 비교하여 검증하였다. 또한 프로그램을 사용하여 내압을 받는 자긴가공된 특수강/복합재 실린더의 응력분포를 살펴봄으로써 설계초기단계에서 경향성 검토를 쉽게 할 수 있어 초기설계에 유용하게 사용될 것으로 사료된다.

Keywords

References

  1. Zhu, R., and Yang, J., "Autofrettage of thick cylinders," Inter-national Journal of Pressure Vessels and Piping, Vol. 75, No. 6, May 1998, pp. 444-446.
  2. Gao, X.L., "Elasto-plastic analysis of an internally pressurized thick-walled cylinder using a strain gradient plasticity theory," International Journal of Solids and Structures, Vol. 40, No. 23, Nov. 2003, pp. 6445-6455. https://doi.org/10.1016/S0020-7683(03)00424-4
  3. Parker, A.P., "A Re-Autofrettage Procedure for Mitigation of Bauschinger Effect in Thick Cylinders," Journal of Pressure Vessel Technology, Vol. 126, No. 4, Nov. 2004, pp. 451-454. https://doi.org/10.1115/1.1806446
  4. Chena, H.W., Sunb, H.K., and Liub, T.C., "Autofrettage analysis of fiber - reinforced composite tube structure incorporated with a SMA," Compos Struct, 89 2009, pp. 497-508. https://doi.org/10.1016/j.compstruct.2008.11.005
  5. Lee, S.Y., "Finite Element Analysis of Filament Wound Cylinders," Journal of the Korean Society for Aeronautical and Space Sciences, Vol. 23, No. 4, 1995, pp. 101-108.
  6. Kim, J.H., Shim, W.S., Lee, Y.S., Cha, K.U., and Hong, S.K., "A Study on Residual Stress Analysis of Autofrettaged Thick-walled Cylinders," Journal of the Korean Society for Precision Engineering, Vol. 26, No. 12, 2009, pp. 110-116.
  7. Lee, K.K., and Kim, W.D., "Behavior and Optimization of Cylinder Applied by Composite Tape Wrapping Method," Journal of The Korean Society for Composite Materials, Vol. 24, No. 2, 2011, pp. 22-29. https://doi.org/10.7234/kscm.2011.24.2.022
  8. Xia, M., Kemmochi, K., and Takayanagi, H., "Analisys of Filament-wound fiber-reinforce sandwich pipe under combined internal pressure and thermomechanical loading," Compos Struct, 51, 2001, pp. 237-283. https://doi.org/10.1016/S0263-8223(00)00134-3
  9. Xia, M., Takayanagi, H., and Kemmochi, K., "Analysis of multi-layered Filament-wound composite pipes under internal pressure," Compos Struct, 53, 2001, pp. 483-491. https://doi.org/10.1016/S0263-8223(01)00061-7

Cited by

  1. Finite Element Analysis for the Design of Fiber Reinforced Metal Cylinder vol.26, pp.1, 2013, https://doi.org/10.7234/kscm.2013.26.1.7