• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.7
• /
• pp.495-502
• /
• 2013

This work was performed to investigate proper condition of coagulation treatment as UF process pretreatment that consider UF permeate flux and residual Al concentration. The coagulant used an alum as $Al_2(SO_4)_3{\cdot}16H_2O$ and PACl (r = 1.5) made this study. The experiment was tested in adjusting conditions such as alum dose, flocculation time and coagulation pH of seawater. Consequently, higher coagulant dose lead to elevation of UF permeate flux while residual aluminium also increased in condition of pH 8.0. The most suitable condition which has a good permeate flux and low residual aluminium, in this works, was coagulant dose of 0.7 mg/L (as Al, alum) and 1.2 mg/L (as Al, PACl) and coagulation pH 6.5. In addition, applying the flocculation time with 1.2 mg/L of PACI reduced. The flocculation time reduced UF permeate flux in using alum.

• Microbiology and Biotechnology Letters
• /
• v.22 no.1
• /
• pp.99-105
• /
• 1994

In this study we compared traditional cheesemaking process with the process utilizing ultrafiltration(UF) system. The whole milk retentates were prepared by ultrafiltration to volume concentration ratio(VCR) of 2.00:1, 2.25:1 and 2.50:1. Along with the untreated whole milk, there were studies in terms of the change of pH, titratable acidity and Soxhlet-Henkel($\circ $SH) value by mesophilic lactic starter and curd formation by rennet during Gouda cheese manufacture. Due to the increase of buffering effect titratable acidity and $\circ $SH value increased with the higher concentration ratio. When inoculated with the same volume of mesophilic lactic starter, less pH change occurred in UF retentates than in control milk. When added 0.0025% rennet, UF retentates coagulated 16~ 17 minutes ealier then the control milk. Gouda cheese yield from raw milk and UF retentates was 12.5~13.1% equally, but yield efficiency of UF retentate cheese was slightly higher than that of the raw milk cheese. Quantity of whey from retentate cheese was inversely related to VCR. But whey from retentate cheese contained higher percentage of amjor components than that from control milk cheese. In early ripening, the concentrations of lactose and soluble nitrogen compound were higher in retentate cheeses. Lactose content of control milk cheese was 3.49% and that of 2.00:1. 2.25:1, 2.50:1 VCR retentate was 3.77%, 4.89%, 7.03%, respectively. Thus, the more concentrated cheese contained a higher amount of lactose and all the lactose was hyerolyzed durion 35-day ripenion period. Soluble nitrogen compound of control milk cheese was 1.22% and that of UF cheeses was 1.82~2.06%. After 20-day ripening, soluble nitrogen compound increased starply in UF cheese.

• Korean Membrane Journal
• /
• v.3 no.1
• /
• pp.17-23
• /
• 2001

Polyethersulfone (PES) and cellulose acetate (CA) ultrafiltration (UF) membranes having different molecular weight cut-off values were prepared by immersion precipitation method by changing the compositions of easting solution. Egg white solution was concentrated to volume concentration ratio 4 in tubular UF with membranes made of moderately hydrophobic PES and hydrophilic CA. The process Parameters such as pressure and fluid velocity were controlled in order to apply successfully for egg white solution and to investigate the pressure dependency. The resistance values were measured to investigate the fouling and concentration polarization effect on membrane performance. During concen- tration of egg white solution by UF, the fouling layer appeared to contribute little resistance to flux compared to that of polarized layer.

• Membrane and Water Treatment
• /
• v.9 no.5
• /
• pp.317-325
• /
• 2018

Polyvinyl chloride (PVC) ultrafiltration (UF) membrane was modified by silica sol in the coagulation bath during non-solvent induced phase separation (NIPS) process. The effects of silica sol concentrations on the morphology, surface property, mechanical strength and separation property of PVC UF membranes were systematically investigated. PVC membranes were characterized by Fourier transform infrared spectroscopy (FTIR), energy dispersive spectroscopy (EDS), scanning electron microscopy (SEM), contact angle goniometry and tensile strength measurement. The results showed that silica had been successfully assembled on the surface of PVC UF membrane. With the increase of silica sol concentration in the coagulation bath, the morphologies of PVC UF membranes changed from cavity structure to finger-like pore structure and asymmetric cross-section structure. The hydrophilicity and permeability of PVC UF membranes were further evaluated. When silica sol concentration was 20 wt.%, the modified PVC membrane exhibited the highest hydrophilicity with a static contact angle of $36.5^{\circ}$ and permeability of $91.8(L{\cdot}m^{-2}{\cdot}h^{-1})$. The structure of self-assemble silica had significant impact on the surface property, morphology, mechanical strength and resultant separation performance of the PVC membranes.

• Membrane and Water Treatment
• /
• v.2 no.4
• /
• pp.225-237
• /
• 2011

In this study, response of reversibility of membrane flux during chemically enhanced backwash (CEB) to changes in filtration time, filtration flux and coagulant concentration dosing during ultrafiltration (UF) process was investigated using a regression model. The model was developed via empirical modelling approach using response surface methodology. In developing the model, statistically designed UF experiments were conducted and the results compared with the model output. The results showed that the performance of CEB, evaluated in terms of the reversibility of the membrane flux, depends strongly on the changes in coagulant concentration dosage and the filtration flux. Also the response of the reversibility of membrane flux during CEB is independent of the filtration time. The variance ratio, VR << $F_{value}$ and $R^2$ = 0.98 obtained from the cross-validation experiments indicate perfect agreement of the model output with experimental results and also testify to the validity and suitability of the model to predict reversibility of the membrane flux during CEB in UF operation.

• Membrane Journal
• /
• v.30 no.6
• /
• pp.373-384
• /
• 2020

Antibody-based therapeutics have been receiving great attention as a representative biopharmaceutical, in which many researches are also carried out for its commercialization. The downstream process is considered an important part of the manufacturing processes of antibody-based therapeutics since it directly affects the performance and stability of products. Ultrafiltration/diafiltration (UF/DF), mostly performed in final step during downstream process, are used for the final concentration and formulation of antibody-based therapeutics. This paper reviewed the major products of the UF membrane, process characteristics, and recent research trends in UF/DF.

• Journal of Soil and Groundwater Environment
• /
• v.9 no.3
• /
• pp.12-19
• /
• 2004

Binding mechanisms of polycyclic aromatic hydrocarbons (PAHs) with a purified Aldrich humic acid (PAHA) and its ultrafiltration (UF) size fractions were investigated. Organic carbon normalized binding coefficient ($K_oc$) values were estimated by both a conventional Stern-Volmer fluorescence quenching technique and a modified fluorescence quenching method. Pyrene $K_oc$ values depended on PAHA concentration as well as freely dissolved pyrene concentration. Such nonlinear sorption-type behaviors suggested the existence of specific interactions. Smaller molecular size PAH (naphthalene) exhibited higher $K_oc$ value with medium-size PAHA UF fractions whereas larger size PAH (pyrene) had higher extent of binding with larger PAHA UF fractions. The inconsistent observation for naphthalene versus pyrene was well explained by size exclusion effect, one of the previously suggested specific mechanisms for PAH binding. In general, the extent of pyrene binding increased with lower pH likely due to the neutralization of acidic functional groups in HS and the subsequent increase in hydrophobic HS region. However, pyrene $K_oc$ results with a large UF fraction (>100K Da) corroborated the existence of the size exclusion effect as demonstrated by an increase in $K_oc$ values at a certain higher pH range. The size exclusion effect appears to be effective only for the specific conditions (HS size or pH) that render HS hole st겨ctures to fit a target PAH.

• Membrane and Water Treatment
• /
• v.3 no.2
• /
• pp.99-111
• /
• 2012

The performance of ultrafiltration (UF) membranes with molecular weight cut off (MWCO) of 1000 and 3500 Da in clarifying sugar cane juice was investigated, as well as the performance of a nanofiltration (NF) membrane with MWCO of 200 Da and a reverse osmosis (RO) membrane in concentrating sugar cane juice. For both cases the sugar cane juice had been limed and partially clarified. The UF membranes were found to be effective at clarifying the sugar cane juice in terms of purity rise and reduction in turbidity, colour, starch and protein. A purity rise of approximately 6 was achieved by both UF membranes at trans-membrane pressures (TMP) from 15 to 25 bar. However, Brix reduction in the permeate was between 14.5 and 41.85% and 12.11 and 26.52% for 1000 Da and 3500 Da membranes respectively. For the 200 Da and RO membranes the Brix in the concentrate was increased from 7.65 to 12.3 after 3 hours of operation for the 200 Da membrane at a TMP of 10 bar, whilst the Brix in the concentrate was increased from 15.65 to 27.6 after 3 hours of operation for the RO membrane at a TMP of 35 bar. Overall, UF membranes were found to be unsuitable for clarification of sugar cane juice since significant amount of Brix is reduced in the permeate, whilst RO membranes were found to be effective for concentration of sugar cane juice.

• Textile Coloration and Finishing
• /
• v.16 no.4
• /
• pp.10-18
• /
• 2004

In this work, Aqueous sericin solution was prepared by degumming process with electrolytic reduction water. Then, the microfiltration and ultrafiltration systems were applied to the concentration of aqueous sericin solution. The objective of this study was to select the optimum operating condition among the different pressure. The permeate flux and rejection ratio were observed with time, pressure, flow rate and concentration. and, the wastewater and permeated water quality values such as pH, BOD, COD, and NH levels were measured. In order to see the influence of electrolytic reduction water, the flux of pure water and electrolytic reduction water by PVDF22(MF) and PS100(UF) membrane was measured. In microfiltration system, the relative flux reduction decreased rapidly to 0.02 in the 30min, as the concentration polarization and gel layer formation were increased. and then the sericin concentration rejection ratio was 40%. In ultrafiltration system, the permeate flux decreased with time and concentration, and increased with the operating pressure and flow rate. Optimal condition in PS100 membrane system for sericin concentration was operating pressure 1.464kgf/$cm^24, operating flow rate $7\ell/min at\; 40^{\circ}C$. At that time, sericin concentration rejection ratio was 83% respectably. The sericin solution was concentrated from 0.1wt% solution to 0.2 wt % solution during about 2 hrs by the UF filteration membrane system.

• Textile Coloration and Finishing
• /
• v.9 no.6
• /
• pp.68-73
• /
• 1997

Urea/formaldehyde(UF) and melamine/formaldehyde(MF) microcapsules containing perfume and 2,4,4'-trichlroro-2-hydroxydiphenyl ether(DP) were prepared by the in-situ polymerization using urea and formaldehyde. Effects of dispersing agent, accelerating agent, formaldehyde, agitation speed on the mean diameter of microcapsules were investigated. The diameter of microcapsule was decreased with increasing dispersing agent concentration. A slight increase in the diameter was observed when the concentration of film forming material was increased. The diameter of microcapsule was decreased with increasing agitation speed up to 8,000rpm. The mean diameters of UF microcapsule prepared at 8,000rpm are about 3$\mu$m. A slight decrease in the diameter was observed when the concentration of resorcinol was increased.