• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.2
• /
• pp.51-56
• /
• 2017

Given that the utilization of Unmanned Aerial Vehicles (UAVs) is recently increased, a variety of UAV control methods are being applied. In general, it has been used a lot to directly control a UAV via manipulator. However, tangible user interface is required to control UAVs accurately. This paper proposes a method for controlling an UAV based on multiple Myos. The UAV is connected to a ground control station and then controlled by Myos. Intuitive control is possible by controlling the UAV using tangible user interface.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.3
• /
• pp.212-219
• /
• 2019

As unmanned aerial vehicle (UAV) has been utilized for military operation, efficient ways for controlling UAV has been necessary. In particular, instead of conventional approach using console control, speech recognition based UAV control is essential for military environments in which rapid command operation is required. But research on this novel approach is not actively studied yet. In this study, we introduce efficient ways of speech recognition system operation for voice-driven UAV control, focusing on mission command control from manned aircraft rather than ground control center. We propose an efficient way of system operation for UAV control in cooperation of aircraft and UAV, and verify its efficiency via speech recognition experiment.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.6
• /
• pp.535-544
• /
• 2017

In this paper, to overcome the limitation of information transmission and reception according to the RF system of UAV, it is necessary to check the position of many UAVs in flight on the basis of mobile communication and to make the LTE modem lightweight and low power And UAVs that are in operation are received and controlled. Through this study, we proposed a method to control real-time location tracking by connecting high-resolution images to the network anytime and anywhere. For this purpose, we propose the requirements and requirements of LTE modem using real-time high-speed data communication technology (3G, 4G LTE, Bluetooth) by presenting the communication module system of LTE-based UAV. N:N control system concept and implementation technology(Control system structure, control data flow chart, flight planning and transmission, real-time location tracking).

• Annual Conference of KIPS
• /
• 2016.04a
• /
• pp.675-678
• /
• 2016

최근 무인항공기 (Unmanned Aerial Vehicel, UAV)는 장점인 빠른 이동속도와 장착된 카메라를 이용하여 넓은 지역을 감시하기 위해서 활용되고 있다. 하지만, 조종사가 UAV를 직접 조종하여 넓은 지역을 비행하기에는 많은 비용이 발생한다. UAV가 자율적으로 넓은 지역을 비행하는 방법이 요구된다. 이 논문은 웨이포인트를 기반으로 UAV를 비행시키기 위한 Ground Control Station (GCS)의 구조를 제안한다. 비행할 웨이포인트는 위성항법시스템(Global Positioning System, GPS) 기반으로 설정하고 제안한 구조를 기반으로 다양한 임무 수행을 위해 다수의 비행 알고리즘을 정의하여 UAV를 비행시킨다. 부가적으로, 웨이포인트 기반으로 UAV를 비행시키기 위한 사용자 인터페이스도 소개한다.

• International Journal of Aeronautical and Space Sciences
• /
• v.14 no.1
• /
• pp.58-66
• /
• 2013

This paper addresses the performance of three different types of attitude control systems for the Quad-rotor UAV to perform the flip maneuver. For this purpose, Quad-rotor UAV's 6-DOF dynamic model is derived, and it was used for designing an attitude controller of the Quad-rotor UAV. Attitude controllers are designed by three different methods. One is the open-loop control system design, another is the PD control system design, and the last method is the sliding mode control system design. Performances of all controllers are tested by 6-DOF simulation. In case of the open-loop control system, control inputs are calculated by the quad-rotor dynamic model and thrust system model that are identified by the thrust test. The 6-DOF realtime simulation environment was constructed in order to verify the performances of attitude controllers.

• International Journal of Aeronautical and Space Sciences
• /
• v.9 no.1
• /
• pp.121-128
• /
• 2008

This paper describes the modeling and autopilot design procedure of a Blended Wing-Body(BWB) UAV. The BWB UAV is a tailless design that integrates the wing and the fuselage. This configuration shows some aerodynamic advantages of lower wetted area to volume ratio and lower interference drag as compared to conventional type UAV. Also, BWB UAV may be increase payload capacity and flight range. However, despite of these benefits, this type of UAV presents several problems related to flying qualities, stability, and control. In this paper, the detailed modeling procedure of BWB UAV and stability analysis results using the linearized model at trim condition are represented. Finally, we designed the autopilot of BWB UAV based on a simple control allocation scheme and evaluated its performance through nonlinear simulation.

• International Journal of Aeronautical and Space Sciences
• /
• v.11 no.3
• /
• pp.167-174
• /
• 2010

The design, dynamics, and control allocation of tri-rotor unmanned aerial vehicles (UAVs) are introduced in this paper. A trirotor UAV has three rotor axes that are equidistant from its center of gravity. Two designs of tri-rotor UAV are introduced in this paper. The single tri-rotor UAV has a servo-motor that is installed on one of the three rotors, which enables rapid control of its motion and its various attitude changes-unlike a quad-rotor UAV that depends only on the angular velocities of four rotors for control. The other design is called 'coaxial tri-rotor UAV,' which has two rotors installed on each rotor axis. Since the tri-rotor type of UAV has the yawing problem induced from an unpaired rotor's reaction torque, it is necessary to derive accurate dynamic and design control logic for both single and coaxial tri-rotors. For that reason, a control strategy is proposed for each type of tri-rotor, and nonlinear simulations of the altitude, Euler angle, and angular velocity responses are conducted by using a classical proportional-integral-derivative controller. Simulation results show that the proposed control strategies are appropriate for the control of single and coaxial tri-rotor UAVs.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.4
• /
• pp.91-97
• /
• 2019

Recently, UAV manufacturers are developing UAV system in a form that can be controlled by CS regardless of UAV kind and using STANAG 4586 interface standard considering Interoperability. STANAG 4586 is a NATO military standard developed to control various UAVs with standardized equipment. In such a case, UAV handover will inevitably occur and it is one of the most important function for safe UAV flight in platform using STANAG 4586. In the future combat situation where collaboration between AV and UAV is anticipated, seamless handover of UAV is a part of continuous research. In this paper, we propose requirements for UAV handover based on ARP 4761 safety assessment and analyze feasibility of the requirements by comparing UAV handover process in STANAG 4586. As a result of the comparative analysis, the proposed handover requirements based on ARP 4761 includes all the handover procedures of STANAG 4586 and present additional considerations for SOP creation and CS development. Applying the proposed handover requirements in the UAV development process can reduce the probability of loss of UAV control over the handover process and it can be expected to help improve the safety of UAV.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.6
• /
• pp.517-525
• /
• 2007

As usage of UAV becomes more common, a basic requirements on the system are changing. Existent system did function embodiment by major object, but current UAV puts bigger weight to availability. Therefore, all the advanced countries in UAV technologies put great efforts in reliability analysis techniques and source collection of system, and reflect the result in design. The authors are developing a flight control system for a UAV and using the reliability analysis techniques in the process. This paper introduces basic reliability analysis techniques and results of analysis for a small UAV flight control system that is developing present. The result plans efficiency enlargement UAV development and operation process.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.12
• /
• pp.857-866
• /
• 2022

Fixed-wing UAVs have long endurance and range capabilities compared to other aerial platforms. These advantages led fixed-wing UAVs to become a popular platform for reconnaissance missions in the military. In this research, we modeled fixed-wing UAVs, including the landing gear model and developed a guidance and control system for flight control computers to construct a HILS environment. We also developed an autopilot system that includes automated take-off, cruise, and landing control for UAVs. We also retrived the Aerodynamic coefficients an UAV using Datcom and AVL software and used them for 6 degrees of freedom modeling. The Flight control computer calculates guidance commands using the Carrot chasing guidance law after distinguishing the condition of the UAV based on 16 pre-defined flight modes and calculates control inputs using Nonlinear Dynamic Inversion (NDI) control scheme. We used RTNngine to integrate the Simulink model and flight control computer for HILS environment formulation.