• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.11
• /
• pp.895-901
• /
• 2013

In this paper we propose design of a multi-protocol gateway middleware based on USN. The proposed multi-protocol gateway middleware defined the transmit messages format, and were used the USN module interface protocol for connect to external application MCU using the UART. In this case, the gateway was checks the communication state of Zigbee module with settings information, and setting Zigbee serial PDU format. The experimental results of the proposed multi-protocol gateway middleware were proved the efficiency of integrate protocol gateway to use the multi-protocol gateway than gateway to using the repeater through the power control and communications a controlled experiment.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.497-498
• /
• 2008

모바일 폰에서 IrDA를 통하여 개인정보 (전화번호부, 동영상, 사진등) 송수신시 IrMC, IrOBEX 그리고 HDLC 프로토콜 기반위의 IrLAP등의 프로토콜 스택을 사용하고 있다. Primary, secondary 두 mobile phone 간에 IrLAP layer의 payload data 송수신시 이용되는 3가지 physical layer schemes 중 전송속도 1l5.2kbps data rate의 제안된 표준인 Asynchronous(Async) frame 방식을 이용한다. [1] 현재의 모바일 폰에서는 Async frame scheme을 구현하기 위한 인터페이스 방식 중 UART 인터페이스를 이용하여 구현하고 있다. 현 모바일 폰에 이미 구현 되어 있는 기존 UART의 FIFO 제어 방법과 Interrupt service routine의 제어 알고리즘을 개선하여 기존 제어 방식과 비교하고 향상된 성능의 결과는 Throughput로 도출한다. 현 모바일 폰에서 사용자가 개인 정보 data등을 저장할 수 메모리 공간이 점점 늘어나고 있는 추세이다. Camera의 해상도 현 5Mega pixel까시 지원되고 동영상 파일 등도 근거리 무선통신인 IrDA로 송수신할 수 있으므로 본 성능비교 file의 size는 100Mega 이상도 비교할 수 있도록 하였다.

• The Journal of the Korea Contents Association
• /
• v.4 no.1
• /
• pp.1-7
• /
• 2004

In addition to wired communication technology, wireless communication technology has been driving communication revolution nowadays. Bluetooth technology carries out data/voice communication making pico-net and the various application services are supported by access network connected to public network. This paper presents educational software development of bluetooth protocol stack including HCI, L2CAP, RFCOMM, SDP and profiles including GAP, SPP, GEOP, FTP. This software which supports programming environment of these protocol monitoring and emulation is implemented basically step by step for education based on H connected to the bluetooth device through RS-232-C, UART or USB cable. Application program coded by Visual C is operated over the firmware loaded on the bluetooth device connected to the PC. Additionally ftp and chatting function are developed to enhance educational efficiency.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.6
• /
• pp.135-140
• /
• 2021

In this paper is a study on system design to prevent accidents using accelerometers. A switching power FET was configured at the power supply stage, and DC-DC converter, a regulator, and an LDO were designed for the power supply. In order to solve the power problem at once, it was divided into two parts, and a 3-axis accelerometer was designed to extract motion information to safely prevent accidents. Microprocessor enables communication through I2C and UART communication ports, and enables debugging through J-LINK. As a result of measuring the acceleration sensor data, it was confirmed that the power is normally cut off to prevent accidents when motion at an angle of 30° or more is detected.

• Journal of IKEEE
• /
• v.17 no.4
• /
• pp.407-417
• /
• 2013

In this paper, a reconfigurable peripheral unit for LED lighting communication is presented. Embedded lighting devices require various communication protocols. Usually, serial communication protocols and lighting control communication protocols such as DALI, DMX512, UART, SPI, IrDA, etc. are used in lighting devices. When the requirements of communication protocols are satisfied with separate IPs, the cost and the power consumption can considerably increase. We propose a reconfigurable communication peripheral unit which uses analysis of signal formats of the protocols. The gate count of the reconfigurable peripheral unit uses only 57% of the gate count of the separate implementation. Also, in this paper, a mapping table based DALI-ZigBee interfacing method for flexible lighting network configurations is proposed. Using this method, various DALI-ZigBee network systems can be easily set up. An LED lighting system platform is implemented to verify the operation of the DALI-ZigBee interfacing method. The reconfigurable peripheral unit and the DALI-ZigBee interfacing method can be efficiently used to implement various wired/wireless lighting communication systems.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.107-115
• /
• 2013

Smart appliances with multi-media and telecommunication equipments provide users complicated convenience functions. On the contrary, 8-bit controller-based low performance electronics still cannot afford such multimedia and telecommunication. If we find a way to have low-end electronics connected and provide complicated functions, they can be also made "smart". Fortunately, 8-bit controllers used in low-end appliances have UART, which can be connected to any of BlueTooth, Wi-Fi and ZigBee communication modules which can, in turn, communicate with smart devices. Any communication module can be attached to the low-end electronics due to the variety of smart devices' connectivity at the other side. Although the convenience functions seem complicated, they are actually macros in a script form composed of micro commands which implement the base functions of appliances. Since the kinds of the base functions are not that many, the low-end electronic appliances will become "smart" if their control program can be extended to execute sequentially the micro commands in any combination. Such simple innovation has not seen the world, until now due to the overhead of the additionally required hardware such as display devices and buttons. The high-quality display and touch screen functionalities of smart devices can replace the required hardware, and remove the overhead completely. In fact, the low-end appliances become smart as if an "evolution kit" is newly equipped.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.1
• /
• pp.95-99
• /
• 2003

In addition to wired communication technology, wireless communication technology has had communication revolution nowadays. Bluethooth technology carries out data/voice communication within pico-net. Nowadays the various services are supported by access network connected to public network. This paper presents implementation of bluetooth protocol analyser which simulates bluetooth protocol. MS window98 and visual C are used for development environment and application program is operated over the firmware loaded on the bluetooth device connected to the PC through UART which of the maximum transmission rate is 115kbps because transmission rate less than 20kbps affects rarely the performance. The performance analysis on the propose system is carried out as simulating the signalling information for the voice test and the traffics between two bluetooth systems for file transfer. The throughput analysis for file transfer service and call processing capacity for voice service are considered as performance analysis parameters. File access time is very important parameter and throughput is 13 kbps in case breakpoint time to file access is 0.04sec. Also call processing time is about 16.6ms in case of communication with the headset. The performance analysis of simulation results satisfies with bluetooth device development.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.605-609
• /
• 2000

This paper presents a development of the Pulse Width Modulation ASIC for control of the AC servo or spindle motor in machine tools. The ASIC is designed two PWM functions for simultaneous control of a converter and an inverter. Also the device includes additionally two UART functions for interfacing the RS232C with PC or other devices. The device is connected to the microprocessor of Intel or Motorola by bus interface. The required output voltage and frequency for the motor control is programmed to the PWM block and the corresponding switching signals are calculated and generated with regard to the programmed value.

• Journal of IKEEE
• /
• v.12 no.2
• /
• pp.75-80
• /
• 2008

There are many researches to reduce power consumption of battery-operated Transceiver for 2.4 GHz smartRF applications. However, components such as processor, memory and LCD based power managements reach the limit of reducing power consumption. To overcome the limit, this research proposes novel low-power Transceiver and transceiver Hardware Design. Experimental results in the real smartRF Transceiver show that the proposed methods can reduce power consumption additionally than component based power managements.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.735-736
• /
• 2008

Recently Multi media industry require HDMI-CEC which is the system to integrate various product one action. So you need to implement CEC when you use HDMI1.3a. In this paper, presented how to make CEC protocol in MCU and how to reduce power consumption. This system implement CEC protocol and uart communication as using WELTREND MCU.