• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.6
• /
• pp.998-1002
• /
• 2006

In this paper, we have designed 800MHz band broadband antenna which is improves of microstrip antenna narrow bandwidth problem including the CDMA band and be able to integrated the GSM and TRS band will design. It used the duplex resonance effect it had the L-Shaped feeding structure which adds the u-slot. It was measured that the frequency bandwidth of the designed antenna which is planed $897MHz\sim1013MHz$ with 215MHz(23.8%). And the antenna gain is 9.3dBi, 3dB beam width $60^{\circ}$ in both the E-plane and H-plane.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.2 s.93
• /
• pp.194-198
• /
• 2005

A novel ultra wideband microstrip-fed circular patch antenna having band stop characteristic in UNII band is presented. The band stop characteristic is realized by inverted-U shaped slot. The range of stop bandwidth can be adjusted by changing the length of the slot. The measured impedance bandwidth of the proposed antenna is from 2.9 GHz to 12.1 GHz with the stop band from 4.9 GHz to 6 GHz for VSWR<2. This antenna shows a monopole-like radiation pattern and flat gain characteristic throughout the operating frequency band.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.4
• /
• pp.636-644
• /
• 1999

Experimental and simulation results are presented on the Aperture-Coupled microstrip patch antennal with U-shaped slot. Experiment and simulation results include impedance bandwidth, copolar and crosspolar-pattern characteristics and gain measurements. Simulation results show the advantages of U-slotted patch antenna comparing with the normal patch antenna. More than 35% impedance bandwidth is obtained with reasonably restricted cross-polar radiation pattern. The U-slotted radiation element fed by aperture-coupling method can be more easily extended to array structure, compared with that fed by coaxial cable.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.3-6
• /
• 2008

In this paper, we propose the folded PIFA with its made an alteration to a factor of resonance for L-slot PIFA. Proposed antenna maintain diminished size patch and improve each bandwidth of GSM(0.88$\sim$-0.96 GHz) and W-CDMA(1.92$\sim$2,17 GHz) for miniaturized repeater. The non-slot step folded PIFA's structure that design of essence was general L-slot PIFA for dual-band. It has no U-slot, multi band and the another slot. The parameters of proposed antenna were optimized for dual-band and compact size by folded singleness patch. Proposed antenna by using folded singleness patch take satisfaction main point, bandwidth of GSM and W-CDMA, compact patch size($39{\times}21{\times}13mm^3$). The antenna was designed by FDTD simulation tool and it was made from result of simulation. Measured data shown that the proposed non-slot step folded PIFA was strong possibility.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.6
• /
• pp.63-70
• /
• 2012

This paper discussed on the directive gain improvement method of the U-type ultra wide-band(UWB) planar patch antenna model with CPW feeding. For directive gain improvement, the U-type printed patch antenna model with CPW feeding is reconstructed as a microstrip structure by adding a reflection plane with aperture slot. The reflection coefficient of the reconstructed antenna is less than -6.5 dB(VSWR < 3.3) to the characteristic impedance of $50.08{\Omega}$ and showed the directive radiation patterns with the directive gain of 7.5 dBi ~ 10.1 dBi, the front-back ratio of 17.8 dB ~ 28.7 dB and the range of -3dB radiation angle over ${\pm}30^{\circ}$ to the main beam direction of ${\theta}=0^{\circ}$.

• ETRI Journal
• /
• v.28 no.3
• /
• pp.379-382
• /
• 2006

A novel reconfigurable microstrip patch antenna with frequency and polarization diversities is proposed. A U-slot is incorporated into a square patch, and a PIN diode is utilized to switch the slot on and off, which realizes the frequency diversity characteristic. The polarization diversities among linear polarization (LP), right-hand circular polarization (RHCP), and left-hand circular polarization (LHCP) are also obtained by switching three PIN diodes on the slot and the truncating corners of a square patch on and off. The antenna design and experimental results are presented.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.1
• /
• pp.20-26
• /
• 2013

In this paper, we propose a multi-band monopole antenna with a band-notching U-slot, which is fabricated inside the flexible polymide film substrate. The U-shaped slot located on the patch-shaped monopole antenna provides band-notch at 2.7 GHz, but also helps to improve return loss at adjacent frequency bands. The performance of the antenna attached on an automobile-glass has been simulated and measured. The fabricated antenna provides more than 10 dB return loss for ISM band(2.4~2.483 GHz) and WAVE band(5.85~5.925 GHz), 2.8~5.7 dBi maximum gain, and good radiation patterns.

• ETRI Journal
• /
• v.32 no.4
• /
• pp.614-617
• /
• 2010

For an antenna-in-package (AiP), via holes are used to connect the antenna ground and system ground. In this letter, a dual-frequency AiP with a U-slot embedded in the patch is proposed. By properly arranging three via holes under the non-radiating edge, an AiP with two resonant frequencies is realized. Then a U-slot is embedded in the patch to further improve the bandwidth of the AiP. To validate the proposed design, an AiP with the bandwidth of 4.49% at 2.45 GHz and 6.02% at 5.32 GHz is achieved and fabricated. The measured results agree with the simulated results.

• Journal of Navigation and Port Research
• /
• v.31 no.6
• /
• pp.503-507
• /
• 2007

In this paper, the ultra-widebend, microstrip patch antenna with the bandwidth of 3 GHz was implemented for ultra-wideband(UWB) wireless communication applications. In order to cover the very wide bandwidth of 3 GHz, a multi-resonance antenna was designed, each resonance frequency was separated into five frequency bend, 7.5, 8.1, 8.7, 9.3, and 9.9GHz with the interval of 600MHz BW. And for wideband characteristics of each antenna, U-slot antennas were designed at each center frequency. Designed five U-slot antennas were connected in series for multi-resonance of 3GHz BW and wideband matching was also designed for impedance matching transmission line calculated. The relative dielectric constant, the height, the loss tangent of the PCB substrate were ${\epsilon}_r=4.8,\;h=0.6$ and loss tangent=0.0009 respectively. The implemented antenna's radiation patterns and gain were directivity characteristics and $1.46{\sim}4.08dBi$ at the five separated center frequency.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.5
• /
• pp.937-942
• /
• 2018

This paper maximizes the research on broadband characteristics by using air layer instead of using microstrip structure of radiation part with U-shaped slot patched inside and microstrip antenna in order to make the microstrip antenna to have broadband characteristics. Experimental results show that the VSWR is 1.4 or less than the mobile communication frequency band(820~950MHz) and the gain of the antenna is 8.2dBd. This means that the antenna can be miniaturized, and it can be used in the wireless communication fields, and the mobile communication fields for other frequency bands in the future.