• International Commerce and Information Review
• /
• v.11 no.3
• /
• pp.265-286
• /
• 2009

Dumping describes the practice of international price discrimination whereby a producer or exporter sells merchandise in an export market at less than fair value. The U.S. antidumping statutory framework is embodied in the Tariff Act of 1930. The Act states that "dumping" refers to the sale or likely sale of goods at less than fair value. 19 U.S.C. $\S$ 1677(34). The Commerce Department and the Commission are jointly responsible for administering the antidumping law. Commerce determines whether foreign merchandise is being sold in the United States at less than fair value, and the Commission determines whether a domestic industry producing a product like the imported merchandise has been materially injured or threatened with material injury by reason of imports of that product. Recently, in U.S. v. Eurodif, the Supreme Court held the question whether the Commerce can reasonably determin that foreign merchandise has been sold within the meaning of the antidumping law in U.S.. Should 19 U.S.C. Section 1673, which calls for "antidumping" duties on foreign goods, but not services, that sell at less than fair value in the U.S., apply to imported low enriched uranium? Yes. In a unanimous opinion written by Justice David H. Souter, the Supreme Court held that the Commerce Department's view of imported low enriched uranium, as the sale of goods rather than services, was permissible. It reasoned that, since 19 U.S.C. Section 1673 did not specify whether it applied to the production of low enriched uranium, it was left to the reasonable interpretation of the Commerce Department to determine. Accordingly, the Court found the Commerce Department interpreted the statute reasonably.

• Communications of the Korean Mathematical Society
• /
• v.12 no.3
• /
• pp.665-678
• /
• 1997

In this paper we prove that if the minimum of the sectional curvatures of a compact n-dimensional minimal generic submanifold M of a complex projective space is 1/n, then M is the geodesic minimal hypersphere.

• Nuclear Engineering and Technology
• /
• v.56 no.2
• /
• pp.444-450
• /
• 2024

Based on multiple measurements of ionization loss, the Time Projection Chamber (TPC) combines strong tracking ability with particle identification ability in a large momentum range, which is an important advantage of TPC detection technology over traditional ionization measurement technology. According to these two characteristics of TPC, applying it to the measurement of fission cross-section can greatly improve the measurement accuracy. During the measurement of the fission cross-section, the number of target nuclei is required to be accurately measured. So this paper introduces a method for measuring the number of ²³⁵U target nuclei using a fission TPC system. The measurement result agrees with the reference value, and relative error is around 1 %.

• Journal for History of Mathematics
• /
• v.30 no.6
• /
• pp.353-365
• /
• 2017

In general, there is summability among the mathematical tools that are the criterion for the convergence of infinite series. Many authors have studied on the summability of infinite series, the summability of Fourier series and the summability factors. Especially, $H{\ddot{u}}seyin$ Bor had published his important results on these topics from the beginning of 1980 to the end of 1990. In this paper, we investigate the minor academic genealogy of teachers and pupils from Fourier to $H{\ddot{u}}seyin$ Bor in section 2. We introduce the $H{\ddot{u}}seyin$ Bor's major results of the summability for infinite series from 1983 to 1997 in section 3. In conclusion, we summarize his research characteristics and significance on the summability of infinite series. Also, we present the diagrams of $H{\ddot{u}}seyin$ Bor's minor academic genealogy from Fourier to $H{\ddot{u}}seyin$ Bor and minor research lineage on the summability of infinite series.

• Journal of the Korea Concrete Institute
• /
• v.14 no.3
• /
• pp.373-381
• /
• 2002

The cost on transmission and erection of the precast prestressed concrete members largely depends on the weight of them. Optimum process is performed on a U-beam section to control the prestressing force, to reduce the self-weight, and to meet the required strength and stability. The strength, deflection, and concrete stress at the top and bottom of the section considered are required to check according to each construction step in this process. The weight of the original rectangular concrete beam could be reduced up to 39∼50％ from this method. Two full scale prototype U-beams were proposed and tested in this study. It was found that the U-beams in the test showed good performance in strength and serviceability within the limits of ultimate strength design method.

• Journal of the Korea Concrete Institute
• /
• v.18 no.2 s.92
• /
• pp.283-290
• /
• 2006

The paper describes m experimental study on the shear strengthening of concrete beams with exposed wire rope. The strengthening method is using the mechanical bolting of wire rope tensioned on the exterior of beam section. There are two shear strengthening types. The first is closed type wrapped beam section with wire rope like as closed stirrup. The second is U type tensioned at the anchor located in the side of beam section. The main parameters of specimens are strengthening spacings of wire rope with 150, 200, and 250mm for the closed and U type respectively. The shear span ratio of specimens applied by 3-point loading is 4. The results showed that the ultimate shear strength and ductility of strengthened beams increased significantly compared with non-strengthened beams. Especially, the strengthening effect of closed type was very preferable to U type. Therefore, the shear strengthening method with wire rope is very reasonable in view of repair and rehabilitation of beams.

• Nuclear Engineering and Technology
• /
• v.52 no.6
• /
• pp.1099-1109
• /
• 2020

The performance of gadolinium burnable absorber (GdBA) for reactivity control in UO₂ and (U, Th)O₂ fuels and its impact on spent fuel characteristics was performed. Five fuel assemblies: one without GdBA fuel rod and four each containing 16, 24, 34 and 44 GdBA fuel rods in both fuels were investigated. Reactivity swing in all the FAs with GdBA rods in UO₂ fuel was higher than their counterparts with similar GdBA fuel rods in (U, Th)O₂ fuel. The excess reactivity in all FAs with (U, Th)O₂ fuel was higher than UO₂ fuel. At the end of single discharge burn-up (~ 49.64 GWd/tHM), the excess reactivity of (U, Th) O₂ fuel remained positive (16,000 pcm) while UO₂ fuel shows a negative value (-6,000 pcm), which suggest a longer discharge burn-up in (U, Th)O₂ fuel. The concentration of plutonium isotopes and minor actinides were significantly higher in UO₂ fuel than in (U, Th)O₂ fuel except for ²³⁶Np. However, the concentration of non-actinides (gadolinium and iodine isotopes) except for ¹³⁵Xe were respectively smaller in (U, Th)O₂ fuel than in UO₂ fuel but may be two times higher in (U, Th)O₂ fuel due to its potential longer discharge burn-up.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.3 no.1
• /
• pp.29-34
• /
• 2012

Even though the longitudinally stiffened laminated composite plates with closed section ribs should be an effective system for axially compressed members, the existing researches on the applications of closed-section ribs, especially for the laminated composite plates, are not sufficient. This study is aimed to examine the influence of the sectional stiffness of U-shaped ribs on the buckling modes and strengths of laminated composite plates. Applying the orthotropic plates with eight layers of the layup $[(0^{\circ})_4]_s$ and $[(0^{\circ}/90^{\circ})_2]_s$, 3-dimensional finite element models for the U-rib stiffened plates were setup by using ABAQUS and then a series of eigenvalue analyses were conducted. From the parametric studies, the minimum required ply thicknesses as well as the buckling strengths were presented for the analysis models. The buckling strengths were compared with the theoretical critical stress equation for simply supported plates based on the Classical laminated plate theory. This study will contribute to the future study for evaluating the minimum required stiffness and optimum design of U-rib stiffened plates.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.542-543
• /
• 2012

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.2
• /
• pp.161-171
• /
• 2014

In this paper the flow dynamics of the flue gas equipment in the desulfurization system was numerically analyzed by simulating the problems for the turbulent and combustion flow from Induced Draft Fan(I.D.Fan) outlet to Booster Up Fan(B.U.Fan) inlet using the commercial CFD software of CFD-ACE+ in CFDRC company for Computational Fluid Dynamic Analysis. The guide vane of this section was examined for the minimum pressure loss and the uniform flow dynamic to B.U.Fan with the proper velocity from I.D,Fan exit to B,U,Fan inlet section at the boiler both the maximum continuous rating and the design base. The guide vanes at I,D.Fan outlet and B.U.Fan inlet were removed and modified by numerical simulation of the CFD analysis. The flue gas at the system had the less pressure loss and the uniform flow dynamics of the flow velocity and flow line by comparing with the old design equipment.