Browse > Article
http://dx.doi.org/10.4334/JKCI.2006.18.2.283

Study on the Shear Strengthening of Concrete Beams with Wire Rope Clamped by Bolts  

Kim, Sun-Young (BHRI, Chonnam National University)
Song, Jin-Gyu (Dept. of Architecture, Chonnam National University)
Lee, Young-Uk (Dept. of Architecture, Kunsan National University)
Byun, Hang-Yong (Korea Engineering & Consultant)
Publication Information
Journal of the Korea Concrete Institute / v.18, no.2, 2006 , pp. 283-290 More about this Journal
Abstract
The paper describes m experimental study on the shear strengthening of concrete beams with exposed wire rope. The strengthening method is using the mechanical bolting of wire rope tensioned on the exterior of beam section. There are two shear strengthening types. The first is closed type wrapped beam section with wire rope like as closed stirrup. The second is U type tensioned at the anchor located in the side of beam section. The main parameters of specimens are strengthening spacings of wire rope with 150, 200, and 250mm for the closed and U type respectively. The shear span ratio of specimens applied by 3-point loading is 4. The results showed that the ultimate shear strength and ductility of strengthened beams increased significantly compared with non-strengthened beams. Especially, the strengthening effect of closed type was very preferable to U type. Therefore, the shear strengthening method with wire rope is very reasonable in view of repair and rehabilitation of beams.
Keywords
wire rope; bolt; nut; close type; U type;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 박순규, 이상윤, '합성섬유로프 인장재로 보강된 RC보의 휨거동', 대한건축학회 논문집, 20권 8호, 2004. 8, pp.19-26
2 한국콘크리트학회, 콘크리트 구조설계기준, 2003
3 ACI Committee 318, Building Code Requirement for Reinforcement Concrete and Commentary, American Concrete Institute, 2005
4 Asin, M., The Behavior of Reinforced Concrete Continuous Deep Beams, Delft University Press, 1999
5 Marti, P., 'Basic Tools of Reinforced Concrete Beam Design', ACI Structural Journal, Vol.82, No.1, Jan.-Fab., 1985, pp.46-56
6 MacGregor, J. G., Reinforced concrete : Mechanics and design, Prentice-Hall International, Inc. 1997
7 Collins, Michael P., Mitchell, Denis, Adebar, Perry, and Vecchio, Frank J., 'A General Shear Design Method', ACl Structural Journal, Vol.93, No.1, Jan.-Fab., 1996, pp.36-45
8 Mhphonde, Andrew G., and Frantz, Gregory C., 'Shear Tests of High-and Low-Strength Concrete Beams Without Stirrups', ACl Structural Journal, Vol.81, No.4, Jul.-Aug., 1984, pp.350-357
9 Mark K Johnson and Julio A Ramirez, 'Minimum Shear Reinforcement in Beams with Higher Strength Concrete', ACI Structural Journal, Vol. 86, No.4, Jul-Aug., 1984, pp.376-382
10 민락기, 오창렬, '포스트텐셔닝을 이용한 기존 구조물 보강', 콘크리트학회지, 8권 4호, 1995. 8, pp.65-75
11 Cook, W. D. and Mitchell, D., 'Studies of Disturbed Regions near Discontinuities in Reinforced Concrete Members', ACI Structural Journal, Vol.85, No.3, Mar.-Apr., 1988, pp. 206-216
12 Sharif. A., AI-Sularnani, Basunbul, G. J., I. A, Baluch, M. H, and Husan, M, 'Strengthening of Shear-damaged RC Beams by External Bonding of Steel Plates', Magazine of Concrete Research, Vol.47, No.173, Dec., pp.329-334
13 M&S(주), (주)고려E&C, '콘크리트 구조물 보수용 보강재 및 그것을 이용한 콘크리트 구조물의 보수보강공법', 특허 제 0414448호(2003.12.24)
14 박상렬, '외부 프리스트레싱으로 보강된 RC보에서 강재 량 및 텐던깊이에 따른 프리스트레싱 강재의 극한응력', 콘크리트학회논문집, 15권 4호, 2003. 8, pp.585-593
15 Teng Susanto, Kong Fung-Kew, Poh Soon-Ping, Guan Lingwei W., and Tan Kang-Hai, 'Performance of Strengthened Concrete Deep Beams Predamaged in Shear', ACI Structural Journal, Vol.93 No.2, Mar.-Apr., 1996, pp.159-171
16 Stone, W.C. and Breen, J. E., 'Behavior of Post-Tensioned Girder Anchorage Zones', PCI Journal, Vol.29, No.1, Jan.-Feb. 1984, pp.64-109
17 Matamoros, A. B. and Wong, K. H., 'Design of Somply Supported Deep Beams Using Strut-and-Tie Models', ACI Structural Journal, Vol.100, No.6, Nov.-Dec., 2003, pp.704-712
18 Ramirez Julio A., 'Strut-Tie Design of Pretensioned Concrete Members', ACl Structural Journal, Sep.Oct, 1994, pp.572-578