• Proceedings of the KWS Conference
• /
• 2007.11a
• /
• pp.196-198
• /
• 2007

Laser cladding technology was studied as a method for upgrading the present repair procedures of damaged tubes in a nuclear steam generator and Doosan subsequently developed and designed a new Laser Cladding Repair System. One of the important features of this newly developed Laser Cladding Repair System is that molten metal can be deposited on damaged tube surfaces using a laser beam and filler wire without the need to install sleeves inside the tube. Laser cladding qualification tests on the steam generator tube material, Alloy 600, were performed according to ASME Section IX.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.66-72
• /
• 2006

Marine diesel engine production and refinements sought a continuous increase on mean effective pressure and thermal efficiency. These results in increased maximum combustion pressure within the cylinder and vibratory torque in crankshaft. As such, crankshaft should be designed and compacted within its fatigue strength. In this paper, the 8H25/33P($3,155ps{\times}900rpm$) engine for ship propulsion was selected as a case study, and tile strength analysis of its crankshaft is carried out by. simplified method recommended by IACS M53 and a detailed method with the crankshaft assumed as a continuous beam and bearing supported in its flexibility. The results of these two methods are compared with each other.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.241-241
• /
• 2015

플라즈마 건식 식각 기술은 반도체 식각공정에서 효과적으로 이용되고 있으며, 반도체 소자의 크기가 줄어듬에 따라 미세하고 정확하게 식각 깊이를 제어 할 수 있는 원자층 식각기술 많은 관심을 받고 있다. 실리콘을 대체 할 수 있는 우수한 전기적 특성을 가진 III-V 화합물 반도체 재료인 InGaAs에 대한 원자층 식각을 통하여, 흡착가스에 대한 표면흡착 및 탈착가스에 대한 표면탈착 메커니즘을 고찰하였다. 또한, 성분 및 표면분석 장치를 이용하여 InGaAs 원자층 식각 특성에 대해 연구하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.332-332
• /
• 2015

Block Copolymer lithography는 deep nano-scale device 제작을 위한 기존의 top-down방식의 photo-lithography를 대체할만한 기술로 많은 연구가 진행되고 있다. polystyrene(PS)/poly-methyl methacrylate (PMMA)로 구성된 BCP의 nano-scale PS mask는 일반적인 플라즈마 공정에 쉽게 damage를 입는다. 중성빔 식각을 이용하여 식각 공정 중 발생하는 BCP의 degradation을 감소시키고, 비등방성 식각 profile을 얻을 수 있으며 sidewall roughness(SWR)와 sidewall angle(SWA)가 향상되는 것을 알 수 있었다.

• Proceedings of the KIEE Conference
• /
• 1998.07f
• /
• pp.2127-2129
• /
• 1998

In this paper, discharging part of high voltage pulse power supply of E-beam generating device is simulated and experimented. It is composed of high voltage part and high voltage pulse part. High voltage part is AC 380, DC/DC converter, high voltage high frequency transformer. High voltage pulse part is double pulse forming network and Thyratron. In the result, computer simulation analysis is same to experimental result and high voltage pulse is obtained 10kV, 4A, 10uS.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.826-830
• /
• 2008

In this paper, the vibration of a rotating shaft with a thin rigid disk on bearing supports is considered. It is assumed that the shaft has uniform, circular cross-section. Based on the Timoshenko-beam theory, the transverse displacements and slops in two lateral directions, the axial displacement, and the torsional deformation are considered. And flexible supports are used to analyse the bearings. A spectral element model is developed for the vibration analysis of the rotating shaft with a thin rigid disk, which is modeled by two shaft elements and a thin rigid disk element. The result of vibration analysis by finite element method is compared to the result of this research.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.2027-2030
• /
• 2002

SFFS(Solid Freeform Fabrication System) is commercializing to rapid prototyping concept in world- wide some corporations including the U.S.A, have much technological problems yet and need new mode for agile solid freeform fabrication as well as prototyping. In this paper, we design an algorithm that the cutting path of laser beam, on the SFFS, is controlled with constant speed. The designed algorithm fer constant-speed path control is implemented and experimented in the CAFL$\^$VM/ (Computer Aided Fabrication of Lamination for Various Material) system, the new SffS which is developed in this paper. Finally, the ceramic, new material developed in this paper, cut and fabricated. The dimensional accuracy and mechanical stability of the 3D object is confirmed through the experiment, also.

• International Journal of Concrete Structures and Materials
• /
• v.7 no.4
• /
• pp.273-285
• /
• 2013

An experimental investigation was conducted to compare the shear strength of full-scale beams constructed with chemically-based, self-consolidating concrete (SCC) with conventional concrete (CC). This experimental program consisted of 16 rectangular beams (12 without shear reinforcing and 4 with shear reinforcing in the form of stirrups), 8 beams for each mix design. Additionally, three different longitudinal reinforcement ratios were evaluated within the test matrix. The beam specimens were tested under a simply supported four-point condition. The experimental shear strengths of the beams were compared with both the shear provisions of selected standards (U.S., Australia, Canada, Europe, and Japan) and a shear database of CC specimens. This comparison indicates that chemically-based SCC beams possess comparable shear strength as CC beams.

• Information and Communications Magazine
• /
• v.24 no.8
• /
• pp.40-52
• /
• 2007

본고에서는 비/저활용(57-66GHz) 대역에 대한 새로운 주파수 자원을 개척하여 HDTV급 신호를 케이블 및 위성방송 셋톱박스, 게임콘솔, DVD플레이어, 캠코더 및 이동식 멀티미디어 장비와 무선으로 연결시키는 전송 기술 개발을 위하여 Intel, Philips, Motorola, IBM, SiBeam, Panasonic, Sony등 세계적인 기업들이 국제 표준화(IEEE802.15, ETSI/BRAN, ECMA International) 공동 협력 및 기술 개발 경쟁을 벌이고 있는 상황이다. 본 표준기술은 국내 기업이 세계 시장을 장악하고 있는 LCD, PDP 및 차세대 DVD플레이어 등에 적용될 Wireless HD-SDI(High Definition Serial Data Interface)/ DVI(Digital Visual Interface)와, 외장 하드 디스크, 메모리 등 외부 기억 장치와의 자원 공유에 사용될 Muti-Gbps급 Wireless LAN, Wireless PAN, Wireless SAN(System Area Network) 등에 적용될 무선 전송 기술이다. 비/저활용 $59{\sim}66GHz$ 대역에 대한 국제 표준화로 IEEE802.15.3c를 중심으로 활발히 일어나고 있는 표준기술과 표준화 동향을 살펴본다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.05a
• /
• pp.119-120
• /
• 2015

SUS316L의 내부식성을 증진시키기 위해 우수한 내부식성 합금원소로 알려진 Al, Cr을 SUS316L에 Sputtering, E-beam evaporation하여 Al, Cr 코팅층을 형성시킨 후 대기 중, $Ar-1%SO_2$ 분위기에서 부식시켰다. 그 결과 코팅층에 의해 $600^{\circ}C$까지 $Al_2O_3$, $Cr_2O_3$ 형성되어 보호피막 역할을 함으로써 내부식성이 증진되었다.