• Journal of Aerospace System Engineering
• /
• v.16 no.1
• /
• pp.17-27
• /
• 2022

A certain level of stability margin airworthiness criteria should be met to secure robustness against uncertainties between the real plant and the model in a flight control system design. The U.S. Department of Defense (DoD) specification of MIL-F-9490D and airworthiness certification standard of MIL-HDBK-516B uses gain and phase margin criteria of flight control system. However, the same stability margin criteria is applied at all development phases without considering the design maturity of each development phase of the aircraft. Ultimately, a problem arises when the aircraft operation envelope is excessively restricted. This paper proposes the relation of handling qualities and stability margin, and presents re-established stability margin criteria as a development phases and verification methods. The results of the research study are considered to contribute to the verification of the stability margin criteria more flexibly and effectively by applying the method to not only the currently manned developing aircrafts but also the unmanned vehicle to be developed in the future.

• Korean Journal of Radiology
• /
• v.23 no.1
• /
• pp.112-123
• /
• 2022

Objective: To investigate the relationship between ¹⁸F-FDG PET/CT semi-quantitative parameters and the International Association for the Study of Lung Cancer, American Thoracic Society/European Respiratory Society (IASLC/ATS/ERS) histopathologic classification, including histological subtypes, proliferation activity, and somatic mutations. Materials and Methods: This retrospective study included 419 patients (150 males, 269 females; median age, 59.0 years; age range, 23.0-84.0 years) who had undergone surgical removal of stage IA-IIIA lung adenocarcinoma and had preoperative PET/CT data of lung tumors. The maximum standardized uptake values (SUVmax), background-subtracted volume (BSV), and background-subtracted lesion activity (BSL) derived from PET/CT were measured. The IASLC/ATS/ERS subtypes, Ki67 score, and epidermal growth factor/anaplastic lymphoma kinase (EGFR/ALK) mutation status were evaluated. The PET/CT semi-quantitative parameters were compared between the tumor subtypes using the Mann-Whitney U test or the Kruskal-Wallis test. The optimum cutoff values of the PET/CT semi-quantitative parameters for distinguishing the IASLC/ATS/ERS subtypes were calculated using receiver operating characteristic curve analysis. The correlation between the PET/CT semi-quantitative parameters and pathological parameters was analyzed using Spearman's correlation. Statistical significance was set at p < 0.05. Results: SUVmax, BSV, and BSL values were significantly higher in invasive adenocarcinoma (IA) than in minimally IA (MIA), and the values were higher in MIA than in adenocarcinoma in situ (AIS) (all p < 0.05). Remarkably, an SUVmax of 0.90 and a BSL of 3.62 were shown to be the optimal cutoff values for differentiating MIA from AIS, manifesting as pure ground-glass nodules with 100% sensitivity and specificity. Metabolic-volumetric parameters (BSV and BSL) were better potential independent factors than metabolic parameters (SUVmax) in differentiating growth patterns. SUVmax and BSL, rather than BSV, were strongly or moderately correlated with Ki67 in most subtypes, except for the micropapillary and solid predominant groups. PET/CT parameters were not correlated with EGFR/ALK mutation status. Conclusion: As noninvasive surrogates, preoperative PET/CT semi-quantitative parameters could imply IASLC/ATS/ERS subtypes and Ki67 index and thus may contribute to improved management of precise surgery and postoperative adjuvant therapy.

• Journal of Advanced Technology Convergence
• /
• v.3 no.1
• /
• pp.1-11
• /
• 2024

This study was a descriptive research study conducted to determine how nursing students' good death awareness and nursing attitudes toward dying patients affect their empathy. The subjects of the study were 155 nursing students, and data were collected using an online survey method. Data analysis was performed using descriptive statistics, independent t-test, one-way ANOVA, and multiple regression using the IBM SPSS Statistics 26. Higher attitude toward care of dying (B=.312) had a statistically significant positive effect on empathy capacity (p<.010). The variables that affected nursing students' empathy capacity were end-of-life experiences of relatives (𝛽=.226) and attitude toward care of dying (𝛽=.220). The regression model was statistically significant (F=6.968, p<.001), explained 10.4% of empathy. This study is expected to be used as basic data for the development of programs to strengthen the empathy capacity of nursing students in the future.

• Journal of Korean Society of Forest Science
• /
• v.28 no.1
• /
• pp.1-20
• /
• 1975

F$\ddot{u}$r die Erforschllng der Variationen bei der Naturpopulationen der Pinus densifiora wurden drei Populationen aus Chuwangsan (Kyong-buk), Anmyondo (Chung-nam) und Odaesan (Kangwon) Ausgewiiblt. Bei je 20 Individuen jeder Population wurden die Variationen von der Eigenschaft der $\ddot{a}$usseren Gestalt, von der anatomischen und morphologischen Eigenschaft der Kiefernadel und von der Holzqualit$\ddot{a}$t an Bohrsp$\ddot{a}$nen untersucht. Das Ergebnis der Untersuchung konnte in den folgenden sechs Punkten formuliert werden. 1. Von den Eigenschaften der $\ddot{a}$usseren Gestalt ist die Geradheit des Baumstamms, der Durchmesser der Zweige und der Winkel der Verzweigung in der Odaesan Population wlinschenswerter als in anderen Populationen. 2. Es wird festgestellt, dass sich die drei Nadelmerkmale, Anzahl der Z$\ddot{a}$hne je 0.5 cm, Anzahl der Stomata-Reihen und Anzahl der Harzkan$\ddot{a}$le, sowohl zwischen den Populationen als auch zwischen den Individuen signignifikant unterscheiden. 3. Bei der Betrachtung des Harzkanal Index, der Schichtanzahl der Hypodermis und der Entfernung der Fibrovasalb$\ddot{u}$ndel wird aufgezeigt, dass sich alle drei gepr$\ddot{u}$ften Populationen geringf$\ddot{u}$gig von der normalen Kiefer unterscheiden. 4. Zwischen den Populationen ergibt sich ein Unterschied im Prozentanteil des Spatho lzes und im spezifischen Geswicht, jedoch zeigt die Breite der Jahresrings und die Tracheidenl$\ddot{a}$nge keinen Unterschied. Das spezifische Gewicht und die Tracheidenl$\ddot{a}$nge der Individuen jeder Population ist signifikant verschieden. 5. Bei dem Alter 11-20 ist der Prozentanteil des sp$\ddot{a}$tholzes am gr$\ddot{o}$ssten und wird aber danach immer geringer bis zum Alter 30; sp$\ddot{a}$ter zeigt sich dann keine sichtbare Ver$\ddot{a}$nderung mehr. Das spezifische Gewicht sich vergr$\ddot{o}$ssert bei der Zunahme des Jahresrings, nimmt aber dann in Anmyondo und Odaesan Populationen beim Alter 21-30 wieder ab. Die Tracheidenl$\ddot{a}$nge der drei Populationen besitzen die Neigung, sich nach der zunahme der Jahresringe zu vermehren. 6. Mit diesen hier behandelten Charakteren werden ganz allgemeinen die Unterschiede der drei Kiefer populationen festgestellt. Diese Ergebnisse sind sehr bemerkenswert betrachtet vom genetischen Gesichtspunkt der waldbaumpopulation.

• International Commerce and Information Review
• /
• v.13 no.4
• /
• pp.51-79
• /
• 2011

Korea has accomplished the establishment of the National Single Window for Paperless Trade. Since 1991, it has developed Trade Automation Service System based on EDI technology. In 2003, Korean government and private sectors jointly began to set up National Paperless Trade Service( e-Trade Service) as one of the e-government projects. In 2008, they commenced the uTradeHub Service which was equipped with Internet based e-B/L and e-Nego service systems for the first time in the world To facilitate the service Korea amended its e-Trade facilitation Act and Law by 2007. At the end of 2011, Korea historically recorded its trade volume of 1 trillion US dollars and joined '$1 trillion trade club' as the 9the member country since the country had started international trade less than five decades ago. A rolling out of the e-B/L and e-Nego service will 'ally reduce the transaction costs of trading businesses and accelerate the activation e-trade services. The purposes of the study are to examine 'e-B/L Korea' service and its facilitation strategies as well as identify obstacles to utilize the 'e-B/L Korea' service. The paper reviewed and analyzed Korea's Paperless trade system and distinctive characteristics of the 'e-B/L Korea Service. Parts of the fOWld distinctive characteristics of the Korea's e-B/L service are as follows; It is well equiped with IT and legal system. It also has more that 30,000 potential users who are already uTradeHub service users. The paper indicated several weaknesses of the current system such as global KPI issues, circulation of the electronic documents not only in the domestic market but also among economies, development of the electronic Bill of Exchange. As resolution measures, the paper recommended the introduction of mutual recognition system of PKI among trade partner counties, setting up e-trade solution for small and medium companies, and special attention to raise users' awareness of the e-B/L service.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.6
• /
• pp.5-13
• /
• 2019

The international trend in soil nailed wall design has been evolved from the allowable stress design to limit state design and it is still currently ongoing. The design guidelines in Korea and Hong Kong still adopts the allowable stress design philosophy while those in others mostly do the limit state design. In this study, four soil nail design methods presented in the major design guidelines (U.S. FHWA GEC 7 (2015), Clouterre in France (1991), Soil nailing - best practice guidance in U.K. (CIRIA, 2005), Geoguide 7 in Hong Kong (2008) and Design standard for slope reinforcement work in Korea (KDS 11 70 15 f: 2016)) are described and analyzed in brief. The factor of safety and CDR (Capacity-to-Demand Ratio) which is used to measure the degree of conservatism of a design guide are obtained for the two cases. One is the design example presented in CIRIA (2005) and the other is in-situ loading test performed on the top of backfill of the soil nail wall to investigate the conservatism of design guidelines. It is revealed that the design method in overall stability of soil nail walls in domestic design method (CDR=0.78) is the most conservative and those by Clouterre (CDR=0.99, 1.09), Geoguide 7 (CDR=1.13, 0.97), U.S. FHWA (CDR=1.09, 1.07) and CIRIA (CDR=1.40, 1.16) in order from the second most conservative to the least conservative for the design example presented in CIRIA. For the in-situ loading test performed on the top of backfill of the soil nail wall, the order of conservatism is identical except that the places of Geoguide 7 (CDR=0.66, 0.72) and FHWA (CDR=0.73, 0.72) are changed. However, the results obtained among U.S. FHWA (2015) and Clouterre (1991) and Geoguide 7 (2008) are not so different.

• Journal of agriculture & life science
• /
• v.51 no.2
• /
• pp.117-126
• /
• 2017

Hanwoo young bulls are selected based on performance test using the weight at 12 months and pedigree index comprising marbling score. Pedigree index was not based on the progeny tested data but the breeding value of the proven bulls; resulting a lower accuracy. The progeny testing of the young bulls was categorized into testing at farm and at the test station. The farm tested data was difficult to compare with those from test station data. Farm tested bulls had different slaughter ages than those for test station bulls. Therefore, this study had considered a different age at slaughter for respective records on ultrasound traits. Records on body weight at 12 months, ultrasound measures at 12 and 24 months(uIMF, uEMA, uBFT, and uRFT), and carcass traits(CWT, EMA, BFT, and MS) were collected from steers and bulls of Hanwoo national improvement scheme between 2008 and 2013. Fixed effects of batch, test date, test station, personnel for measurement, personnel for judging, and a linear covariate of weight at measurement were fitted in the animal models for ultrasound traits. The ranges of heritability estimates of the ultrasound traits at 12 and 24 months were 0.21-0.43 and 0.32-0.47, respectively. Ultrasound traits at 12 and 24 months between similar carcass traits was genetically correlated at 0.52-0.75 and 0.86-0.89, respectively.

• Journal of Radiation Protection and Research
• /
• v.38 no.2
• /
• pp.68-77
• /
• 2013

Derived Investigation levels(DILs) were calculated to protect the workers from the effects of both radiological hazard and chemical toxicity by uranium intake. Investigation Levels(ILs) of committed effective dose of 2 mSv $y^{-1}-6$ mSv $y^{-1}$ and uranium concentration of 0.3 ${\mu}g$ $g^{-1}$ in kidney, based on Korean Nuclaer Safety Act, Korean Occupational Safety and Health Act and current scientific studies of uranium intake were assumed. DILs of radiological hazard and chemical toxicity were then calculated based on the concentration of uranium in air of workplace, the lung monitoring and urine analysis, respectively. As a result, in case of the nuclear fuel fabrication plant where 3.5% enriched uranium is handled, derived investigation level(DIL) for the control of the concentration of uranium in the air of workplace assumed with 15-min acute inhalation was 0.6 mg $m^{-3}$ for all types of uranium. DILs for the control of the average concentration of uranium in air of workplace, assuming an 8-hour workday, were 15.21 ${\mu}g$ $m^{-3}$ of Type F uranium, 0.41-1.23 Bq $m^{-3}$ and 0.13-0.39 Bq $m^{-3}$ for Type M and Type S uranium, respectively. DILs for the lung monitoring assumed with a period of 6-month interval were 0.37-1.11 Bq and 0.39-1.17 Bq in acute and chronic inhalation for Type M, respectively and 0.30- 0.91 Bq and 0.19-0.57 Bq in acute and chronic inhalation for Type S, respectively. Since a detection limit of typical germanium detector for the measurement of 235U activity is 4 Bq, DILs calculated for the lung monitoring were not appropriate. DILs for urine analysis, for which an interval was assumed to be 1 month, were 14.57 ${\mu}g$ $L^{-1}$ based on chemical toxicity after acute inhalation. In addition, acute and chronic inhalation of Type M were calculated 2.85-8.58 ${\mu}g$ $L^{-1}$ and 1.09-3.27 ${\mu}g$ $L^{-1}$ based on the radiological hazard, respectively.

• Korean Journal of Environment and Ecology
• /
• v.29 no.5
• /
• pp.693-702
• /
• 2015

In order to identify the species and to reveal the phylogenetic relationship of rook populations found in Jeju-do Province in winter seasons, we determined the sequences of mitochondrial cytochrome c oxidase I (COI) gene and analyzed the genetic structure of maternal lineages and phylogenetic relationship. The rook DNAs were isolated from the post-mortem specimens and plumages collected from agricultural farms in Jeju-do Province including U-do Island. The obtained COI sequences (n=41) showed over 97.0% identities with those previously reported from Corvus frugeligus. Three COI haplotypes (J01-J03) were detected from COI sequences of the rooks obtained in Jeju-do Province but those did not show the site-specific patterns, showing that they might be derived from a common maternal origin. Eight maternal haplotypes were detected from all COI sequences obtained. Among those three haplotypes contained the COI sequences from Northeast Asia including eastern Russia, Mongolia and South Korea. On the other hand, the other five haplotypes contained the COI sequences reported from Central Asia, Middle East, western Russia and European countries. The COI sequences from Jeju-do Province were located on three haplotypes (CF01-CF03) belonging to Northeast Asian rook lineages. The NJ tree showed the distinct branch patterns suggesting two different maternal lineages of C. frugilegus, which proposed as two parapatric subspecies, C. f. frugilegus (Western) and C. f. pastinator (Eastern). These findings using DNA barcoding approaches will be contributed to provide the information about avian fauna for understanding the genetic structure of maternal lineage, phylogenetic relationship and their molecular ecology.

• Restorative Dentistry and Endodontics
• /
• v.32 no.3
• /
• pp.180-190
• /
• 2007

The purpose of this study was to evaluate the abrasion resistance of surface penetrating sealant which was applied on a composite resin restoration and to provide proper time to reapply sealant on composite resin surface. Two hundred rectangular specimens, sized $8\times3\times2mm$, were made of Micronew (Bisco, Inc., Schaumburg, IL, U.S.A) and divided into two groups; F group (n = 10) was finished with coarse and medium grit of Sof-Lex discs and BisCoverwas applied B group (n = 190) after finishing with discs. B group was again subdivided into nineteen subgroups From B-1 group to B-18 group were subjected to toothbrush abrasion test using a distilled water-dentifrice slurry and toothbrush heads B-IM group was not subjected to toothbrush abrasion test. Average surface roughness (Ra) of each group was calculated using a surface roughness tester (Surfcorder MSE-1700: Kosaka Laboratory Ltd., Tokyo, Japan) . A representative specimen of each group was examined by FE-SEM (S-4700: Hitachi High Technologies Co., Tokyo, Japan). The data were analysed using cluster analysis, paired t-test, and repeated measure ANOVA. The results of this study were as follows; 1. Ra off group was $0.898{\pm}0.145{\mu}m$ and B-IM group was $0.289{\pm}0.142{\mu}m$. Ra became higher from B-1 group $(0.299{\pm}0.48{\mu}m$ to B-18 group $(0.642{\pm}0.313{\mu}m$. 2. Final cluster center of Ra was $0.361{\mu}m$ in cluster 1 $(B-IM\simB-7)$, $0.511{\mu}m$ in cluster 2 $(B-8\simB-14)$ and $0.624{\mu}m$ in cluster 3 ($(B-15\simB-18)$. There were significant difference among Ra of three clusters. 3 Ra of B-IM group was decreased 210.72% than Ra of F group. Ra of B-8 group and B-15 group was increased 35.49% and 51.35% respectively than Ra of B-IM group. 4. On FE-SEM, B-IM group showed the smoothest resin surface. B-8 group and B-15 group showed vertically shallow scratches , and wide and irregular vertical scratches on composite resin surface respectively. Within a limitation of this study, finished resin surface will be again smooth and glazy if BisCover would be reapplied within 8 to 14 months after applying to resin surface.