• 대한골관절종양학회지
• /
• 제7권4호
• /
• pp.139-143
• /
• 2001

목적 : 근위 경골 종양의 광범위 절제술에 따른 재건술은 적절한 연부 조직의 피복(cover age), 슬관절 신전 장치(knee extensor apparatus), 특히 슬개건의 견고한 재부착이 어려워 슬관절의 기능적 결과가 만족스럽지 않은 것으로 알려져 있는바, 근위 경골의 골육종으로 광범위 절제 후 종양 대치물 삽입으로 사지 구제술을 시행 받은 환자에서 기능을 평가하고 문제점을 분석하기 위하여 본 연구를 시행하였다. 대상 및 방법 : 1992년 4월부터 1998년 10월까지 경골 근위부의 골육종으로 확진된 후 종양 대치물을 이용한 사지 구제술을 시술 받은 11명을 대상으로 하였다. 남자가 6명, 여자가 5명이었으며, 환자의 나이는 15세에서 65세로 평균 23.7세였다. 추시 기간은 최단 1년에서 최장 4년 6개월로, 평균 2년 5개월이었다. 최종 기능평가는 1993년 국제 사지 보존 회의(International Symposium On Limb Salvage; ISOLS)에서 수정 보완한 방법을 이용하여 동통, 기능(functional activity), 환자의 정서적 만족도(emotional acceptance), 보조기 사용여부(use of external support), 보행 능력(walking ability), 그리고 보행 상태(gait)등 여섯 가지로 나누어 평가하였다. 각각의 요소를 최하 0점에서 최고 5점으로 하고 그 중간을 정도에 따라 1, 2, 3, 4점으로 점수화하여 정상 기능에 대한 백분율(% )로 표시하여 분석하였다. 결과 : 기능 평가 성적은 정상 기능에 대해 최고 86.7%에서 최저 53.3%로 평균 68.3%를 나타냈으며, 세부적으로 보면 동통이 82.5%, 기능이 62.5%, 정서적 만족도가 67.5%, 보조기 사용여부는 77.5%, 보행능력은 62.5%, 보행상태는 57.5%였다. 슬관절의 평균 운동범위는 신전 5도, 굴곡 85도였으며, 5례에서 최소 5도, 최고 15도, 평균 10도의 신전 제한(extension lag)을 보였다. 합병증으로는 2명에서 수술 후 감염 소견을 보였으며 1명은 항생제 치료로 호전되었으나 다른 1명은 종양 구조물 제거 후 관절고정술로 전환이 필요하였다. 결론 : 경골 근위부의 골육종 환자에서 광범위 절제 후 종양 대치물 삽입에 의한 사지구제술의 기능 평가 성적은 감염이 합병되지 않은 경우에는 전반적으로 양호하였으나, 동통 소실, 보조기 사용여부에 비해 슬관절의 부분 강직 및 extension lag로 인해 기능, 정서적 만족도, 보행등에서 덜 만족스러웠다. 임상적으로 더 만족스러운 결과를 얻기 위해 수술 후 대퇴사두근 강화 운동 및 굴곡 운동 등의 적극적인 재활 치료가 필요한 것으로 생각된다.

• 대한치과기공학회지
• /
• 제26권1호
• /
• pp.9-34
• /
• 2004

The present study reviews the license registration status of dental technicians and dentists from 1970 to 2002, the number of technician members of The Korea Dental Technician Association from 1990 to 2003, and the number of dentist members in 2003. It also considers the yearly membership fluctuations, its growth rates, yearly increase/decrease, the rate of dentist to dental technician, regional distribution of association members, regional yearly increase/decrease of the members, and the regional distribution of dentists and dental technicians. The purpose is to identify and predict the problems in the demand/supply of dental technicians and the regional imbalance of manpower distribution. By doing so, this study attempts to propose the appropriate standard for the supply of dental technicians and point out the necessity of making mid- or long-term plans for ensuring the efficiency of manpower supply and balanced regional distribution. The result is as follows: 1. The number of dental technicians and dentists in 2002 has grown 36.79 and 9.27 times from 1970, and 2.20 and 2.05 times from 1990, respectively. It tool 11 years for the twofold increase of dental technicians from 1990, one year faster than the same increase of dentists. The number of dental technicians per a dentist was the lowest in 1972 (0.21 person), and the highest in 2002 (0.86 person). Specifically, the fastest growth was observed for a year from 1983 (0.47 technician per a dentist) to 1984 (0.6). From 1984 to 1986, the ratio grew by 0.1 every year. Summing up the numbers of dentists and dental technicians who passed the national certification examination, this study predicted the number of dental technicians per a dentist to be 0.88 in 2003, and 0.90 in 2004. 2. From 1990 to 2003, the average distribution of dental technician was 71.76% in the metropolitan areas and 28.24% in other smaller regions. The proportion of dental technicians working in the three major cities (Seoul, Busan, and Daegu) was the lowest in 2001 (52.39%) and the highest in 1996 (62.66%). The majority number of dental technicians who practiced in the metropolitan areas (about 70% of the entire population) were in service in the three major cities. 3. Compared with 1990, the number of dental technicians in 2003 grew 2.28 times in the large cities, and 2.05 times in other smaller regions. The yearly growth rate was the highest in 1994 over the previous year: 26.06% in large cities and 17.86% in the other regions. In the large metropolitan cities, the growth rate was the highest in Incheon (5.8 times for 5 years from 1998 to 2003), In the rest of the regions, the increase of dental technicians was the highest in Gyeonggi (6.5 times from 1990 to 2003). 4. In 2003, as much as 73.40% of all the members of the Korea Dental Technician Association were distributed in the large metropolitan cities, and the rest 26.60% were in other smaller regions. Meanwhile, 54.35% of the dentists practiced in the metropolitan cities, and the rest 45.65% were in service at other regions. This result indicates that more dental technicians than dentists are concentrated in large cities. More than half of all the technician members of the Association are distributed in the three major cities (i.e. Seoul, Busan, Daegu). On the other hand, 42.03% of dentist members are in these three cities and 53.97% of them practice in Seoul, Gyeonggi, and Busan. In 2003, the ratio of dentist to dental technician is 1:0.43 in general, while the ratio is 1:0.58 in the metropolitan cities, and 1:0.43 in other regions. In 2003, 33.30% of all the certified dental technicians are the member of the Korea Dental Technician Association, while 66.82% of all the licensed dentists are its members.

• Journal of Preventive Medicine and Public Health
• /
• 제23권4호
• /
• pp.391-403
• /
• 1990

In order to assess the degree of atmospheric pollution and noise and to contribute the health improvement of residents in Pusan, the author measured the levels of CO, $SO_2,\;NO_2$, TSP, HCHO and noise in 8 areas (industrial, residential and park areas) from January to March in 1990. The results were as follows : 1. Sasang industrial area was significantly higher($2.85{\pm}0.84ppm$) in the average concentration of CO than other areas. However, there no areas to affect the human body in terms of CO concentration. 2. In general, industrial area was significantly higher ($0.134{\pm}0.084ppm$) in the average concentration of $SO_2$ than other areas, and it was the lowest ($0.009{\pm}0.005ppm$) in the Namchon-dong area. 3. Industrial ($0.033{\pm}0.009ppm$) and residential area ($0.029{\pm}0.004ppm$) were significantly higher in the average concentration of $NO_2$ than Park area ($0.009{\pm}0.001ppm$). However, there were no areas to affect the human body in terms of $NO_2$ concentration. 4. Sasang industrial area was the highest ($580.4{\pm}415.26{\mu}g/m^3$) at the average concentration of TSP and Hae-Un Dae area was the lowest ($97.22{\pm}37.86{\mu}g/m^3$). But TSP concentration showed the level to affect the human body in most areas. 5. Industrial area was significantly higher ($2.25{\pm}1.15ppb$) in the average concentration of HCHO than residential ($1.13{\pm}0.25ppb$) and park area ($1.33{\pm}0.20ppb$). 6. Industrial area was significantly higher ($77.28{\pm}6.92dB(A)$) in the level of noise than residential ($65.77{\pm}3.76dB(A)$) and park area ($64.65{\pm}5.25dB(A)$). In comparison with regional Standard Noise Level, howeverm the average noise level of residential and park area was higher than that of the Standard. In general, the level of pollution of industrial complex areas was relatively higher than those of residential and park areas. Among the industrial areas, sasang area was worst in most items. Both $SO_2$ and TSP showed the level to affect the human body in most of studied areas. It is necessary to install a new Air Quality Standard for HCHO to screen our environmental pollution.

• Clinical and Experimental Reproductive Medicine
• /
• 제26권2호
• /
• pp.163-170
• /
• 1999

Objectives: The aims of this study are 1) to determine if GAST is a better indicator in predicting ovarian response to COH compared with patient's age or basal FSH level and 2) to evaluate its role in detecting abnormal ovarian response. Design: Prospective study in 118 patients undergoing IVF-ET using GnRH-a short protocol during May-September 1995. Materials and Methods: After blood sampling for basal FSH and estradiol $(E_2)$ on cycle day two, 0.5ml (0.525mg) GnRH agonist ($Suprefact^{(r)}$, Hoechst) was injected subcutaneously. Serum $E_2$ was measured 24 hours later. Initial $E_2$ difference $({\Delta}E_2)$ was defined as the change in $E_2$ on day 3 over the baseline day 2 value. Sixteen patients with ovarian cyst or single ovary or incorrect blood collection time were excluded from the analysis. The patients were divided into three groups by ${\Delta}E_2$; group A (n=30):${\Delta}E_2$<40 pg/ml, group B (n=52): 40 pg/ml${\leq}{\Delta}E_2$<100 pg/ml, group C (n=20): ${\Delta}E_2{\leq}100$ pg/ml. COH was done by GnRH agonist/HMG/hCG and IVF-ET was followed. Ratio of $E_2$ on day of hCG injection over the number of ampules of gonadotropins used ($E_2hCGday$/Amp) was regarded as ovarian responsiveness. Poor ovarian response and overstimulation were defined as $E_2$ hCGday less than 600 pg/ml and greater than 5000 pg/ml, respectively. Results: Mean age $({\pm}SEM)$ in group A, B and C were $33.7{\pm}0.8^*,\;31.5{\pm}0.6\;and\;30.6{\pm}0.5^*$, respectively ($^*$: p<0.05). Mean basal FSH level of group $A(11.1{\pm}1.1mlU/ml)$ was significantly higher than those of $B(7.4{\pm}0.2mIU/ml)$ and C $(6.8{\pm}0.4mIU/ml)$ (p<0.001). Mean $E_2hCGday$ of group A was significantly lower than those of group B or C, i.e., $1402.1{\pm}187.7pg/ml,\;3153.2{\pm}240.0pg/ml,\;4078.8{\pm}306.4pg/ml$ respectively (p<0.0001). The number of ampules of gonadotropins used in group A was significantly greater than those in group B or C: $38.6{\pm}2.3,\;24.2{\pm}1.1\;and\;18.5{\pm}1.0$ (p<0.0001). The number of oocytes retrieved in group A was significantly smaller than those in group B or C: $6.4{\pm}1.1,\;15.5{\pm}1.1\;and\;18.6{\pm}1.6$, respectively (p<0.0001). By stepwise multiple regression, only ${\Delta}E_2$ showed a significant correlation (r=0.68, p<0.0001) with $E_2HCGday$/Amp, while age or basal FSH level were not significant. Likewise, only ${\Delta}E_2$ correlated significantly with the number of oocytes retrieved (r=0.57, p<0.001). All four patients whose COH was canceled due to poor ovarian response belonged to group A only (Fisher's exact test, p<0.01). Whereas none of 30 patients in group A (0%) had overstimulation, 14 patients among 72 patients (19.4%) in group B and C had overstimulation (Fisher's exact test, p<0.01). Conclusions: These data suggest that initial $E_2$ difference after GAST may be a better prognostic indicator of ovarian response to COH than age or basal FSH level. Since initial $E_2$ difference demonstrates significant association with abnormal ovarian response such as poor ovarian response necessitating cycle cancellation or overstimulation, GAST may be helpful in monitoring and consultation of patients during COH in IVF-ET cycle.

• 한국환경생태학회지
• /
• 제29권5호
• /
• pp.693-702
• /
• 2015

동절기에 제주도 지역에서 도래하는 떼까마귀의 유전적 특성과 집단 간 유연관계를 구명하기 위해, 미토콘드리아 COI 유전자 서열의 다형성에 기반한 모계 계통 구조와 계통 유연관계를 분석하였다. 떼까마귀 DNA는 우도와 제주도 내에서 발견된 깃털과 사체 시료에서 분리하였다. 결정된 COI 서열들(n=41)은 떼까마귀(Corvus frugilegus)에서 기존에 보고된 서열들과 97.0% 이상 일치하였다. 제주도 떼까마귀 COI 서열들은 3가지 haplotype(J01-J03)으로 구분되었으나 지역-특이적인 양상을 보이지 않아, 이들이 하나의 모계 기원에서 유래한 집단임을 알 수 있었다. 떼까마귀 전체 COI 서열에서 8개의 COI haplotype들이 발견되었다. 이 중 3가지 haplotype들은 러시아 동부, 몽골, 한국 등 동북아시아의 COI 서열들을 포함하였고, 나머지 5가지는 중앙아시아, 중동아시아, 러시아 서부, 유럽국가의 떼까마귀에서 발견되었다. 계통수 상에서 떼까마귀의 COI 서열들은 측소적 종분화 단계인 2아종, C. f. frugilegus와 C. f. pastinator인 2개의 모계 계통으로 뚜렷하게 구분되었다. DNA barcoding 분석을 통한 연구결과는 모계 계통의 구조, 계통 유연관계 및 분자생태를 이해하는 데 중요한 정보를 제공할 것이다.

• 대한바이러스학회지
• /
• 제27권2호
• /
• pp.227-237
• /
• 1997

향약집성방 및 동의보감등 한의학 서적을 기초로 하여 선택한 탕제 45종과 단미제 80종의 메탄올과 열수추출물을 가지고 MTT assay를 실시하여 항Herpes simplex virus-1 (HSV-1)에 대한 활성을 조사하였다. 열수추출 탕제 45종 중 백사전방, 현람방I, 현람방II, 반천청방 4종에서 항 HSV-1 활성을 나타냈고, 이들의 SI (selective index)값은 $2.1{\pm}0.5$에서 $11.8{\pm}2.2$ 범위의 값을 가졌으며 메탄올추출 탕제 45종 중에서는 단치시호탕III, 반천청방, 정향울금방, 대황오배자고, 홍인락삼등방, 호장해독탕에서 활성을 보였고 이들의 SI값은 $1.7{\pm}0.2$에서 $10.5{\pm}3.1$ 범위의 값을 나타냈다. 열수추출 단미제 중계지, 관중, 구인분, 대황, 자화지정, 포공영, 호장근, 황백등 8종에서 항 HSV-1 활성이 나타났고, 이들의 SI값은 $1.6{\pm}0.1$에서 $10.2{\pm}0.7$ 범위의 값을 가졌으며 메탄올추출 탕제 중에서는 계지, 목방기, 상지, 호장근에서 활성을 보였고 이들의 SI 값은 $2.9{\pm}1.5$에서 $9.3{\pm}0.5$ 범위의 값을 나타내었다. 처방제 중 반천청방은 열수추출물과 메탄올 추출물 모두에서 항바이러스 활성을 나타냈고, 단미제 중 계지와 호장근도 열수와 메탄올 추출물 모두에서 항바이러스 활성을 보였다. 이들 탕제 및 단미제는 분획 및 분석실험을 실시하여 활성성분을 추적하고 있다.

• 환경위생공학
• /
• 제15권4호
• /
• pp.59-77
• /
• 2000

This study was carried out to investigate on several factors, which contaminative the water quality through the water pipe during feeding water, in 42 largescaled apart-ments(total 84 cases) and assayed the Volatile Organic Compounds(VOCs) and concen-tration of heavy metals that inflow and outflow in reservior water in Jeonnam area(Mokpo, Suncheon, Yeosu) from January 1999 to December 1999. The results obtained were summarized as follows ; 1. The quality of the water pipe composition in the order of frequency in the quality of water pipes were Copper(45.2%)> Zinc(38.9%)> Stainless steel(9.5%)> PVC(4.8%)> PM(2.4%) in observing 42 sites. All of the drain pipes were used the cast iron quality. 2. The result of certification curve from 12 items(17kind) of VOCs was $1.0-4.0{\mu{g}}/{\ell}$ range, a coefficient of correlation was shown 0.99 over. A MDL of each substance range was within $0.1-1.0{\mu{g}}/{\ell}$. 3. The result of the assay, 5 kinds(Viny chloride, Dichloromethane, Ethylbenzene, M,P-xylene, Styrene) of the VOCs of 14 kinds was not detected and the other items were detected slightly. The detection rate of one item and over in total VOCs samples, were 25.9% in inflow and 27.9% in outflow. And frequency of detect in inflow/outflow of THM(Chloroform, Bromodichloro-methane, Dibromochloromethane, Bromoform) were shown higher than 94.1%, 97.0% each stages. It comes to the conclusion that all of the samples were reason able for drinking water standards. 4. The coefficient of correlation were reasonable, it shown 0.999 over in $0.1-1.0{\mu{g}}/{\ell}$ of a measuring range conditions of 4kinds in organic substance(Zn, Cu, Fe, Mn). 5. The results were showed suitability in 78 cases(92.9%) and unsuitability in 6 cases (7.1%), in 84 cases of in organic substances. Compare to inflow stage, mean concentrations of heavy metal, were increased slightly in Zn, Cu, Fe except Mn than outflow stage. The result of the mean concentration in organic substance inflow and outflow in the apartment water tank using Pair-compared T-test, in 95% reliance index, were $0.179mg/{\ell}(0.151-0.307mg/{\ell})$ in Zinc, $0.136mg/{\ell}(0.113-0.230mg/{\ell})$ in Copper, $0.052mg/{\ell}(0.048-0.098mg/{\ell})$ in Fe, and there was a bit growing tendency but there was no differece in Mn. 6. The mean concentration of Copper which used Cu pipe as a water supply pipe in apartment were $0.216mg/{\ell}(0.161-0.338mg/{\ell})$ in case of the Zine pipe were $0.286mg/{\ell}(0.204-0.435mg/{\ell})$. It shows that the detection rate was more higher than the other material used in Cu or Zn as the water supply pipe. We supposed to Cu and Zn substance were gushing out water supply pipe.

• 보건교육건강증진학회지
• /
• 제6권2호
• /
• pp.23-39
• /
• 1989

There have been a lot of considerable. discussion and debate surrounding the management model in the health insurance management system and opinions regarding the management operating cost. It is a well known fact that there have always been dissenting opinions and debates surrounding the issue. The management operating cost varies according to the scale of the management organization and component members characteristics of the insurance carrier. Therefore, it is necessary to examine and compare the management operating cost to the simulated management models developed to cover those eligible for the health insurance scheme in this country. Since the management operating cost can vary according to the different models of management, four alternative management models have been established based on the critical evaluation of existing theories concerned, as well as on the basis of the survey results and simulation attempts. The first alternative model is the Unique Insurance Carrier Model(Ⅰ) ; desigened to cover all of the people with no classification of insurance qualifications and finances from the source of contribution of the insured, nationwide. The second is the Management Model of Large-scale District Insurance Carrier(Ⅱ) ; this means the Korean society would be divided into 21 large districts; each having its own insurance carrier that would cover the people in that particular district with no classification of insurance qualifications arid finances as in Model I. The third is the Management Model of Insurance Carrier Divided by Area and Classified with Occupation if Largescale (Ⅲ) ; to serve the self-employed in the 21 districts divided as in Model Ⅱ. It would serve the employees and their dependents by separate insurance carriers in large-scale similar to the area of the district-scale for the self-employed, so that the insurance qualifications and finances would be classified with each of the insurance carriers: The last is the Management Model of the Multi - insurance Carrier (Ⅳ) based on the Si. Gun. Gu area which will cover their own self- employed people in the area with more than 150 additional insurance carriers covering the employees and their dependents. The manpower necessary to provide services to all of the people according to the four models is calculated through simulation trials. It indicates that the Management Model of Large-scale District Insurance Carrier requires the most manpower among the four alternative models. The unit management operating costs per the insured individuals and covered persons are leveled with several intervals based on the insurance recipients. in their characteristics. The interval levels derived from the regression analysis reveal that the larger the scale of the insurance carriers is in the number of those insured and covered. the more the unit management operating cost decreases. significantly. Moreover. the result of the quadratic functional formula also shows the U-shape significantly. The management operating costs derived from the simulated calculation. on the basis of the average salary and related cost per staff- member of the Health Insurance Societies for Occupational Labours and Korean Medical Insurance Corporation for the Official Servants and Private School Teachers in 1987 fiscal year. show that the Model of Multi-insurance Carrier warrants the highest management operating cost. Meanwhile the least expensive management operating cost is the Management Model of Unique Insurance Carrier. Insurance Carrier Divided by Area and Classified with Occupation in Large-scale. and Large-scale District Insurance Carrier. in order. Therefore. it is feasible to select the Unique Insurance Carrier Model among the four alternatives from the viewpoint of the management operating cost and in the sense of the flexibility in promoting the productivity of manpower in the human services field. However. the choice of the management model for health insurance systems and its application should be examined further utilizing the operation research analysis for such areas as the administrative efficiency and factors related to computer cost etc.

• Journal of Korean Society for Atmospheric Environment
• /
• 제10권E호
• /
• pp.311-324
• /
• 1994

The quantitative knowledge of N $O_{\gamma}$ (＝N $O_{x}$ ＋HN $O_3$＋/PAN＋N $O_3$ ＋$N_2$ $O_{5}$ ＋HN $O_2$＋N $O_3$$^{-10}$ ＋organic nitrates＋......)distribution is essential in tropospheric chemistry, especially, especially that related to understanding the processes leading to ozone production. Ambient concentrations of NO, N $O_2$, HN $O_3$ and PAN as well as total N $O_{\gamma}$ were measured during June and early July 1992 at a rural site(Candor, NC), in the central Piedmont region of NC. The measurements of N $O_{\gamma}$ species were made in an effort to provide a comprehensive understanding of nitrogen chemistry and to investigate the total nitrogen budget at the site. N $O_{\gamma}$, N $O_2$, and NO showed diurnal variations with maxima in the morning. The maximum N $O_{\gamma}$ concentration reached was 14.5 ppbv, and the maximum concentrations of NO and N $O_2$ were 5.4 and 7.8 PPbv, respectively. The mean N $O_{\gamma}$ concentration as found to be 2.88$\pm$1.58 ppbv(n=743). The mean concentrations of NO and N $O_2$, were found to be 0.15 $\pm$ 0.29 ppbv(n＝785) and 1.31 $\pm$ 0.99 ppbv(n＝769). Products of photochemical oxidants, (N <$O_{\gamma}$-N $O_{x}$ ), such as HN $O_3$ and PAN, as well as ozone showed diurnal variation with maxima in the afternoon and minima at night The fractions of individual reactive nitrogen species to total N $O_{\gamma}$ were investigated and contrasted to the results from remote marine site and rural continental sites. N $O_{x}$ was the major species to total N $O_{\gamma}$(45%). NO concentrations appeared to be nearly constant whether the Prevailing winds were from continental areas or from oceanic areas. Linear regression of $O_3$ with (N $O_{\gamma}$- N $O_{x}$ )/N $O_{\gamma}$ (i.e. percent N $O_{x}$ converted to the photochemical products of N $O_{\gamma}$) yielded ( $O_3$) ＝25.8 〔 N $O_{\gamma}$-N $O_{x}$ 〕/(N $O_{\gamma}$) ＋27, ( $r^{2}$＝0.58). The regression intercept is interpreted as the ozone back ground (intercept=27ppbv) and the slope suggests that 8.6 molecules of ozone are formed per molecule of N $O_{x}$ oxidized products (when the average N $O_{\gamma}$ concentration, about 3 ppbv at the site, is used). The N $O_{x}$ N $O_{\gamma}$ ratio was used as an indicator of the chemical age of airmasses and the ratio showed strong positive correlations with HN $O_3$( $r^{2}$=0.58), PAN ( $r^{2}$=0.46) and $O_3$( $r^{2}$=0.62). Larger N $O_{\gamma}$ and N $O_{x}$ N $O_{\gamma}$ ratio were found when winds came from continental sides. It may suggest that synoptic meteorological conditions and transport of N $O_{x}$ are important in the distribution of N $O_{\gamma}$ and its relationship with photochemical oxidants at the site.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2000년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.