• 제목/요약/키워드: Type of solvent

검색결과 559건 처리시간 0.025초

다성분 용매와 암모늄계 분산제가 적용된 투명 유전체 프릿트 슬립의 분산거동 (Dispersion Behavior of Transparent Dielectric Glass Frits in the Multi-Solvent and Ammonium-Type Dispersant System)

  • 김주원;전영환;황종희;이상진
    • 한국세라믹학회지
    • /
    • 제43권10호
    • /
    • pp.635-639
    • /
    • 2006
  • Dispersion behavior of the slurries consisted of Pb or Bi-based glass frits, which are used for the fabrication of green sheet as PDP front panel transparent dielectric, was examined in non-aqueous solvent system. Measurements of sedimentation height and viscosity were conducted to determine proper dispersion condition in the various solvent and dispersant system. Azotropic compound and ethyl acetate were used as the solvent and ammonium-type dispersant was applied to the slurries. All slurries were dispersed well in azotropic solvent system involving 20$\sim$50 vol% ethyl acetate at 2$\sim$3 wt% dispersant content. Especially, dispersion behavior was notably improved in the addition of ethyl acetate in the Bi-based frit slurry.

무용제 타입 UV경화형 실버 페이스트 개발 (Development of Solvent-Free Type for UV-Curable Silver Paste)

  • 장민용;남현진;남수용
    • 마이크로전자및패키징학회지
    • /
    • 제29권2호
    • /
    • pp.107-112
    • /
    • 2022
  • 본 연구에서는 용제를 전혀 사용하지않고 UV경화가 가능한 실버 페이스트를 개발하였다. 무용제(solvent-free) 타입으로 개발한 실버 페이스트의 점도 및 점탄성 측정하였다. 그리고 스크린인쇄로 패턴을 인쇄한 후에 UV경화로 전극도막을 형성시켰다. 형성된 전극도막의 전도성, 연필경도, 접착력에 대해서 평가하였다. 마지막으로 전극도막의 경화특성은 TGA 및 FT-IR로 평가하였다. 이러한 결과를 정리하면 전도성, 접착력, 경화특성에 대해서는 Paste(4), 즉 1.2 ㎛의 구형 실버 파우더와 50 nm 실버 파우더를 72:8%로 혼합한 실버 페이스트가 가장 우수한 물성이 얻어짐을 알 수 있었다.

The Solvolysis of Benzoyl Chloride in Water-Acetone Mixtures Under High Pressure

  • Jee, Jong-Gi;Ree, Taik-Yue
    • Bulletin of the Korean Chemical Society
    • /
    • 제8권1호
    • /
    • pp.31-39
    • /
    • 1987
  • By using a complete rate constant($k_e$) which treats a solvent (water) as a reactant, and a conventional rate constant($k_c$), which ignores the solvent in describing the rate, the parameters ${\Delta}V^{\neq}_s,\;{\Delta}H^{\neq}_s\;and\;{\Delta}S^{\neq}_s$ were introduced. These quantities represent the volume change, the enthalpy change, and the entropy change accompanying the electrostriction which occurs when solvent molecules condense on the activated complex. The authors measured the rates of the solvolysis of benzoyl chloride in water-acetone mixtures at $15^{\circ}$ to $30^{\circ}C$ and 1 bar to 2500 bars. Applying the authors' theory to the experimental results, the parameters, ${\Delta}V^{\neq}_s,\;{\Delta}H^{\neq}_s\;and\;{\Delta}S^{\neq}_s$ were evaluated, and it was found that they are all negative, indicating that water dipoles condense on the activated complex. They also proposed the following equations: ${\Delta}H^{\neq}_c\;=\;{\Delta}H^{\neq}_e\;+\;{\Delta}H^{\neq}_s\;and\; {\Delta}S^{\neq}_c\;=\;{\Delta}S^{\neq}_e\;+{\Delta}S^{\neq}_s\;,\;where\;{\Delta}H^{\neq}_c\;and\;{\Delta}H^{\neq}_c\;and\;{\Delta}S^{\neq}_s $are the activation enthalpy change and the activation entropy change for the conventional reaction rate, respectively, and ${\Delta}H^{\neq}_e$ and ${\Delta}S^{\neq}_e$ are the corresponding quantities for the complete reaction rate. The authors proposed that for the $SN_1$ type, all the quantities, ${\Delta}V^{\neq}_s,\;{\Delta}S^{\neq}_s\;,{\Delta}H^{\neq}_s\;and\;{\Delta}S^{\neq}_s$ are comparatively large, and for the $SN_2$ type, these quantities are smaller than for the $SN_1$ type, and occasionally the case ${\Delta}S^{\neq}_e$ < 0 occurs. Using these criteria, the authors concluded that at high temperature, high pressure and for a high water content solvent, the SN_1$ type mechanism predominates whereas in the reversed case the $SN_2$M type predominates.

Organic Solvent Absorption characteristics of Split-type micro fiber fabrics

  • Lee, Kwang-Ju;Kim, Seong-Hun
    • 한국섬유공학회:학술대회논문집
    • /
    • 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
    • /
    • pp.95-95
    • /
    • 2003
  • In this study, the influences of organic solvent viscosity on absorption properties of split-type micro fiber fabrics is examined with real time absorption measurement device built by our research group recently. And the absorption behavior of these fabrics is analyzed by material, fineness, construction, weight, thickness, and density of fabrics.

  • PDF

Spiropyran과 Spirooxazine 유도체의 열변색 현상 (Thermochromism of Spiropyran and Spirooxazine Derivatives)

  • 이윤상;김종규;허영덕;김명건
    • 대한화학회지
    • /
    • 제38권12호
    • /
    • pp.864-872
    • /
    • 1994
  • 열변색 현상을 나타내는 spiropyran과 spirooxazine 유도체의 흡수 스펙트럼을 관찰하였다. 흡수 스펙트럼의 용매효과를 관찰한 결과, 치환되지 않은 spiro 화합물은 merocyanine-like form이 quinoid type이며, 전자끄는기가 치환된 spiro 화합물은 merocyanine-like form이 zwitter-ion type임을 확인하였다. 닫힌형 구조와 merocyanine-like form 사이의 엔탈피 변화량을 측정하였다. Spiro 화합물의 엔탈피 변화량은 용매의 극성이 증가할수록 감소함을 관찰하였다. Merocyanine-like form의 흡수 스펙트럼을 세 개의 Lorentzian-Gaussian 곱함수의 띠로 분해하였으며, 각 띠의 모양이 용매에 어떻게 변화하는지도 관찰하였다.

  • PDF

Partitioning Behavior of Selected Printing Ink Solvents between Headspace and Chocolate Cookie Samples

  • An, Duek-Jun
    • Preventive Nutrition and Food Science
    • /
    • 제16권3호
    • /
    • pp.267-271
    • /
    • 2011
  • Static Headspace Gas Chromatographic analysis was used to study the partitioning behavior of five organic printing ink solvents between chocolate cookie/air systems. Three cookie sample formulations varied with respect to chocolate type and overall percentage of constituents. Major considerations involved differences in fat content and type and resulting variability in chemical and physical structure. Each of the solvents studied (ethyl acetate, hexane, isopropanol, methyl ethyl ketone, toluene) represents a general class of printing ink solvents based on predominate functional group. Values of the partitioning coefficient (Kp) were determined at equilibrium using measured quantities of both solvent and cookie sample in closed systems at temperature of 25, 35, and $45^{\circ}C$. In each of the three cookies at the three test temperatures, toluene always exhibited the greatest value of partitioning to cookie and hexane always exhibited the least. Results also showed that the partitioning behavior of solvents is generally inversely related to temperature and that solvent affinity, though constant for a particular cookie type over all test temperatures, varies significantly among the three cookie types. The preference of each of the five solvents for each cookie sample was also found to vary with temperature. No correlation was found between the extent of partitioning and cookie formulation or physical characteristic of solvent. The Hildebrand parameter, related to ${\Delta}Hmix$ (heat of mixing), may be used to describe differences in partitioning based on the overall potential of a solvent/cookie interaction to occur. The potential for interaction is dependent upon the chemical structure of the cookie sample and thus the availability of 'active-sites' required for a given solvent.

Marked Difference in Solvation Effects and Mechanism between Solvolyses of Substituted Acetylchloride with Alkyl Groups and with Aromatic Rigns in Aqueous Fluorinated Alcohol and in 2,2,2-Trifluoroethanol-Ethanol Solvent Systems

  • Oh, Yung-Hee;Jang, Gyeong-Gu;Lim, Gyi-Taek;Ryu, Zoon-Ha
    • Bulletin of the Korean Chemical Society
    • /
    • 제23권8호
    • /
    • pp.1089-1096
    • /
    • 2002
  • Solvolyses rate constants of trimethylacetyl chloride (2), isobutyryl chloride (3), diphenylacetyl chloride (4) and p-methoxyphenylacetyl chloride (5) in 2,2,2-trifluoroethanol (TFE)-water, 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP)-water and TFE-et hanol solvent systems at $10^{\circ}C$ are determined by a conductimetric method. Kinetic solvent isotope effects (KSIE) are reported from additional kinetic data for methanolyses of various substituted acetylchlorides in methanol According to the results of those reactions analyzed in terms of rate-rate profiles,extended Grunwald-Winstein type correlations, application of a third order reaction model based a general base catalyzed (GBC) and KSIE values. Regardless of the kind of neighboring groups (CH3- or Ph-groups) of reaction center, for aqueous fluorinated alcohol systems, solvolyses of 2, 3, 4, and 5 were exposed to the reaction with the same mechanism (a loose SN2 type mechanism by electrophilic solvation) controlled by a similarity of solvation of the transition sate (TS). Whereas, for TFE-ethanol solvent systems, the reactivity depended on whether substituted acetyl chloride have aromatic rings (Ph-) or alkyl groups (CH3-); the solvations by the predominant stoichiometric effect (third order reaction mechanism by GBC and/or by push-pull type) for Ph- groups (4 and 5) and the same solvation effects as those shown in TFE-water solvent systems for CH3- groups (2 and 3) were exhibited Such phenomena can be interpreted as having relevance to the inductive effect ( $\sigmaI)$ of substituted groups; the plot of log (KSIE) vs. ${\sigma}I$ parameter give an acceptable the linear correlation with r = 0.970 (slope = 0.44 $\pm$ 0.06, n = 5).

용아초(龍芽草) 유기용매 분획물의 항산화 및 피부 장벽 개선 효과 (Anti-oxidant Activity and Skin Barrier Function Measured in Different Solvent Fractions Obtained from Agrimoniae Herba)

  • 한제근;김민주;박해진;이경하;노성수
    • 대한본초학회지
    • /
    • 제38권3호
    • /
    • pp.19-26
    • /
    • 2023
  • Objectives : Agrimoniae Herba is a herbal medicine widely distributed in Asia and contains flavonoids including catechin, quercitrin, rutin, hyperoside, and quercetin. This study aimed to investigate the anti-oxidant activity and skin barrier function of different solvent fractions (Hexane; methylene chloride, MC; ethyl acetate, EA; n-butanol, Bu; Water) obtained from Agrimoniae Herba. Methods : Anti-oxidant activity of different solvent fractions obtained from Agrimoniae Herba was investigated through total polyphenol contents, total flavonoid contents, 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical scavenging activity, and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radical scavenging activity measurements. Then, filament aggregating protein (Filaggrin), Type I collagen, ceramide synthase (CERS) 3, and CERS4 were analyzed to evaluate the skin barrier strengthening effect of different solvent fractions obtained from Agrimoniae Herba on UVB-stimulated HaCaT cells. Results : As a result of measuring total polyphenol contents, total flavonoid contents, DPPH free radical scavenging activity, and ABTS radical scavenging activity, antioxidant activity was found to be excellent in the order of EA > Bu > MC > Hexane > Water. As a result of measuring mRNA gene expression of Type I collagen, Filaggrin, CERS3, and CERS4 after UVB-stimulated was applied to HaCaT cells treated with different solvent fractions obtained from Agrimoniae Herba, it was found to increase significantly in the Bu-treated group. Conclusion : Our findings show that the Bu sample obtained from Agrimoniae Herba has excellent anti-oxidant ability, which increases Type I collagen, Filaggrin, and ceramide synthetase in UVB-stimulated HaCaT cells to control the skin barrier improvement effect.

Extraction Methods of Organic Components from Rubber Composites and Analysis of the Extract Using Gas Chromatography/Mass Spectrometry

  • Chae, Eunji;Choi, Sung-Seen
    • Elastomers and Composites
    • /
    • 제54권3호
    • /
    • pp.188-200
    • /
    • 2019
  • Rubber articles contain various organic additives such as antidegradants, curing agents, and processing aids. It is important to extract and analyze these organic additives. In this paper, various extraction methods of organic additives present in rubber composites were introduced (solvent extraction, Soxhlet extraction, headspace extraction, and solid-phase microextraction), and the extracts were characterized using gas chromatography/mass spectrometry (GC/MS). Solvent and Soxhlet extractions are easy-to-perform and commonly used methods. Efficiency of solvent extraction varies according to the type of solvent used and the extraction conditions. Soxhlet extraction requires a large volume of solvent. Headspace sampling is suitable for extracting volatile organic compounds, while solid-phase extraction is suitable for extracting specific chemicals. GC/MS is generally used for characterizing the extract of a rubber composite because most components of the extract are volatile and have low molecular weights. Identification methods of chemical structures of the components separated by GC column were also introduced.

Estimation of Ground and Excited State Dipole Moments of Coumarin 450 by Solvatochromic Shift Method

  • Naik, L.R.;Math, N.N.
    • Journal of Photoscience
    • /
    • 제12권2호
    • /
    • pp.57-61
    • /
    • 2005
  • The ground and excited state dipole moments of Coumarin 450 (C 450) laser dye were measured at room temperature in several solvents of varying dipole moments. The ground state dipole moment (${\mu}_g$) is estimated by using the modified Onsagar model and the excited state dipole moments (${\mu}_e$) were estimated by the method of solvatochromism as well as by utilizing the microscopic solvent polarity parameter ($E^N_T$). Further, the deviation of some of the points from the linearity of the $E^N_T$ versus Stokes shift indicates the existence of specific type of solute-solvent interaction. The excited state dipole moment of C 450 were found to be higher than those of the ground state and is interpreted in terms of the resonance structure of the molecule. A reasonable agreement has been observed between the values obtained by the method of solvatochromism and modified Onsagar model. It is observed that, corresponding to cyclohexane solution, the fluorescence maxima shift towards the red region with increasing the polarity of the solvents, hence the transition involved are of ${\pi}-{\pi}^*$ type.

  • PDF