• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.645-650
• /
• 2003

Wheel/Rail geometric constraint relationships, such as effective conicity and gravitational stiffness, strongly influence the lateral dynamics of railway vehicles. In general, these geometric contact characteristics are nonlinear functions of the wheelset lateral displacement. There is a need to develop a wheel/rail contact simulation program for wheels and rails with arbitrary profiles for the prediction of the dynamic behavior of railway vehicles. An algorithm to simulate any combination of wheels and rails is employed and a GUI for easy analysis is constructed. The simulation program is applied to KTX which will run on both KTX and conventional rails, two rail standards having different rail profiles. The results show that the two rail systems have different geometric contact characteristic

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.13 no.2
• /
• pp.140-146
• /
• 2013

In this paper, we describe a vision sensor-based driving algorithm for indoor automatic guided vehicles (AGVs) that facilitates a path tracking task using two mono cameras for navigation. One camera is mounted on vehicle to observe the environment and to detect markers in front of the vehicle. The other camera is attached so the view is perpendicular to the floor, which compensates for the distance between the wheels and markers. The angle and distance from the center of the two wheels to the center of marker are also obtained using these two cameras. We propose five movement patterns for AGVs to guarantee smooth performance during path tracking: starting, moving straight, pre-turning, left/right turning, and stopping. This driving algorithm based on two vision sensors gives greater flexibility to AGVs, including easy layout change, autonomy, and even economy. The algorithm was validated in an experiment using a two-wheeled mobile robot.

• Journal of Advanced Marine Engineering and Technology
• /
• v.17 no.5
• /
• pp.44-53
• /
• 1993

In this paper, we discuss on the control algorithm to make the wheeled inverse pendulum type mobile robot move in two dimensional plane. The robot considered in this paper has two independently driven wheels in same axel which suport and move it-self, and is assumed to have the fyro type sensor to know the inclination algle of the body and rotary encoders to know wheel's rotation angular velocity. The control algorithm is divided into three parts. The first part is for the posture and velocity control for forward-backward direction, the second is the steering control, and the last part is for the control of total system to track the given trajectory. We handle the running velocity control of the robot as part of the posture control to keep the balance because the posture relates deeply with the velocity and can be controlled by the velocities of the wheels. The control problem is analyzed as the tracking control, and the controller is realized with the state feedback and feed-forward of the reference velocity. Constructing the control system which contained one intergrator in forward path, we also realized the control system without observer for the estimation of the accumulated errors in the inclination angle of the body. To prevent the robot from being unstable state by sudden variation of the reference velocity when it starts and stops, or changes velocity, the reference velocity of which acceleration is slowly changing, is ordered to the robot. To control its steering, we give the different reference velocities for both wheels which are calculated from the desired angular velocity of the body. Finally, we presents the experimental results of the experimental robot Yamabico Kurara in which the proposed control algorithm had been implemented.

• Journal of Korea Foundry Society
• /
• v.12 no.4
• /
• pp.317-325
• /
• 1992

Diamond is the hardest material known to humans, also possesses the highest thermal conductivity and a very low thermal expansion coefficient. Therefore, these properties of diamond make them logical choices for many difficult grinding application. Bonding material is a very important factor to performance of a grinding wheel. Grinding glass constitutes one of the major application areas of diamond grinding wheels, and Cu-Sn tin bronze matrix is widely used as a metal bond of diamond wheel in grinding glass but these studies are rarely reported. The bronze test pieces excluding diamond are sintered by the method of hot sizing respectively at $600^{\circ}C$, $650^{\circ}C$, $700^{\circ}C$, with a composition(Cu-10wt%Sn) on ${\alpha}$ phase and two compositions(Cu-20wt%Sn and Cu-23wt%Sn) on ${\alpha}+{\beta}$ phase. The rupture strength of Cu-10wt%Sn is highest. The bronze bonded diamond wheels are manufactured by same conditions as the bronze test pieces. The results of grinding ratio of wheels are highest in case of Cu-10wt%Sn bonded wheel sintered at $650^{\circ}C$ and grinding power is highest in same composition sintered at $700^{\circ}C$.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.10
• /
• pp.935-945
• /
• 2011

We study X-axis or Y-axis high agile attitude control method, using four reaction wheels and two control moment gyros. Since normal satellites use same actuators, researchers design an attitude controller first, and then allocate torque commands to each actuator. However, our satellite uses both control moment gyros and reaction wheels, whose torque output differences are very large. Therefore, we cannot apply normal attitude controller design procedure. In this paper, we solve this problem by combining actuator torque command and attitude controller. Through numerical simulations, we show that our method enables satellite high agility.

• Journal of Korea Foundry Society
• /
• v.34 no.1
• /
• pp.6-13
• /
• 2014

The mechanical properties of low-pressure die cast (LPDC) A356-T6 automotive road wheels are evaluated and correlated with their corresponding microstructures. In this study, two types of alloy wheels processed using different LPDC gating system are investigated. The yield stress, tensile stress, and elongation values tested at room temperature are correlated with the secondary dendrite arm spacing (SDAS) with respect to the gating system, and are also compared with similar studies. The SDAS and precipitates are examined using optical microscopy, scanning electron microscopy (SEM) and energy-dispersive spectroscopy. The phase information is also investigated using X-ray diffraction. Charpy impact tests are also performed from $-100^{\circ}C$ to $200^{\circ}C$, and the fracture surfaces are examined using SEM. The impact energy is demonstrated to increase with increasing temperatures without exhibiting specific transition behaviors as in other nonferrous alloys. The fracture toughness is also evaluated using three point bend test with single-edged bend specimens. The obtained fracture toughness values are in good agreement with those in similar studies.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.2_2
• /
• pp.233-244
• /
• 2020

A double-parked car is the one that is parked in a crowded parking lot with its transmission gear in neutral position and its auxiliary brake released. A double-parked car can be moved by pushing it but doing so is very difficult and dangerous. In a previous study, we proposed an omni-directional mobile robot for moving a double parked car. In that study we adopted Mecanum wheels. Even though the proposed robot showed successful results, it has some drawbacks such as dependency on a load condition, complexity in control, inefficiency in power use, etc. To overcome those drawbacks, we propose a differential drive robot with ordinary two tire wheels. The proposed robot consists of two parts, one is a wheel part and the other is a body part. By selectively connecting or disconnecting those two parts with the aid of an electric brake, the proposed robot is able to have omni-directional mobility.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.806-811
• /
• 2005

The robot to search and rescue is used in narrow space where human cannot approach. In case of this robot, it can overcome obstacles such as wrecks or stairs etc. Also, this robot can do various locomotion for each object. In this reason, an articulated robot has advantages comparing with one module robot. However, the existing articulated robot has limits to overcome vertical passages. For expanding contacted territory of robot, a novel mechanism is demanded. In this paper, the novel mechanism of articulated mobile robot is designed for moving level ground and vertical passages. This paper proposes to change wheel alignment. The robot needs two important motions for passing vertical passages like pipe. One is a motion to press wheels at wall for not falling into gravity direction. The other is a motion that wheels contact a vertical direction of wall's tangential direction for reducing loss of force. The mechanism of the robot focused that two motions can be acted to use just one motor. Length of each link of robot is optimized that wheels contact a vertical direction of wall's tangential direction through kinematic modeling of each link. The force of pressing wall of robot is calculated through dynamic modeling. This robot composes four modules. This mechanism is confirmed by dynamic simulation using ADAMS program. The articulated mobile robot is elaborated based on the results of kinematic modeling and dynamic simulation.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1069-1073
• /
• 2011

When the train is running on the small curved line, there would be severe contact between the rail and wheels, which cause noise and vibration as well as abnormal wear on the rail and the wheels. In order to solve these problems, the steering bogie has been developed. To verify steering performance of the steering bogie, steering angles of two trains, one is the advanced EMU with the steering bogie, another is a conventional EMU with the conventional bogie, were measured while running on the small curve. this comparing test shows that the steering bogie has much higher steering performance than the conventional bogie on the same curved line. To verify more performance data of the steering bogie, further testing and monitoring will be done with the advanced EMU in the test track.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.7
• /
• pp.155-162
• /
• 2003

We propose a new technique far real-tine controller design of a autonomous cruise mobile robot with three drive wheels. The proposed control scheme uses a Caussian function as a unit function in the fuzzy neural network. and a back propagation algorithm to train the fuzzy neural network controller in the framework of the specialized learning architecture. It is proposed a learning controller consisting of two neural network-fuzzy based on independent reasoning and a connection net with fixed weights to simply the neural networks-foray. The control performance of the proposed controller is illustrated by performing the computer simulation for trajectory tracking of the speed and azimuth of a autonomous cruise mobile robot driven by three independent wheels.