• 대한지역사회작업치료학회지
• /
• 제10권1호
• /
• pp.51-61
• /
• 2020

목적 : 정상인을 대상으로 팔뻗기 수행 시 물체 크기와 뻗기 거리가 상지의 운동형상학적 요소에 미치는 영향을 알아보고자 하였다. 연구 방법 : 대상자는 부산시 D대학교에 재학 중인 대학생 30명이며 측정 도구는 삼차원 동작 분석기인 CMS-70P(Zebris Medizintechnik Gmbh, Germany)를 사용하였다. 과제는 6가지 조건이다. 팔뻗기 수행시 물체 크기(2cm, 10cm)와 뻗기 거리(15%, 37.5%, 60%)의 변화에 따른 움직임의 평균 속도, 평균 가속도, 최대 속도, 속도의 정점수를 측정하였다. 대상자의 일반적 특성은 기술통계를 사용하였다. 두 가지 물체 크기에서 세 가지 뻗기 거리로 팔뻗기 과제를 수행했을 때 변수를 비교하기 위해 일원분산분석(One-way ANOVA measure)으로 분석하였고, 사후검정은 Tukey 검정을 실시하였다. 또한 세 가지 뻗기 거리에서 두 가지 물체 크기에 따른 운동형상학적 차이를 분석하기 위해서 독립 t검정(Independent t-test)을 사용하였다. 팔뻗기 거리(15%, 37.5%, 60%)와 물체 크기(2cm, 10cm)에 따른 상호작용효과를 확인하기 위해 이원분산분석(3×2 Two-way ANOVA measure)을 실시하였다. 통계적 유의수준 α는 .05로 설정하였다. 결과 : 정상인은 물체 크기와 뻗기 거리의 변화에 따라 상지 움직임에 유의한 차이가 있었다. 물체 크기가 동일한 경우 뻗기 거리가 길어질수록 평균 속도, 최대속도가 증가하였고, 속도의 정점 수는 감소하였다. 뻗기 거리가 동일한 경우 물체 크기가 커질수록 평균 속도, 최대 속도가 증가하였고 속도의 정점 수는 감소하였다. 물체 크기와 뻗기 거리의 변화는 평균 가속도에 영향을 미치지 않았으며 유의한 차이가 없었다. 결론 : 과제를 시간적, 공간적 특성으로 제한하는 것은 대상자의 상지 움직임에도 영향을 미치게 된다. 따라서 본 연구의 결과를 토대로 신경학적 기능수준에 따라 세밀하게 등급화된 과제제공에 도움이 될 것으로 사료된다.

• The Journal of Advanced Prosthodontics
• /
• 제14권4호
• /
• pp.250-261
• /
• 2022

PURPOSE. The purpose of this study was to analyze the marginal fit of three-unit resin prostheses printed with the stereolithography (SLA) method in two build orientations (45°, 60°) and two layer thicknesses (50 ㎛, 100 ㎛). MATERIALS AND METHODS. A master model for a three-unit resin prosthesis was designed with two implant abutments. Forty specimens were printed using an SLA 3D printer. The specimens were printed with two build orientations (45°, 60°), and each orientation was printed with two layer thicknesses (50 ㎛, 100 ㎛). The marginal fit was measured as the marginal gap (MG) and absolute marginal discrepancy (AMD), and MG and AMD measurements were performed at 8 points per abutment, for 16 points per specimen. All statistical analyses were performed using SPSS software. Two-way analysis of variance (ANOVA) was separately performed on the MG and AMD values of the build orientations and layer thicknesses. Moreover, one-way ANOVA was performed for each point within each group. RESULTS. The margins of the area adjacent to the pontic showed significantly high values, and the values were smaller when the build orientation was 45° than when it was 60°. However, the margin did not differ significantly according to the layer thicknesses. CONCLUSION. The marginal fit of the three-unit resin prosthesis fabricated by the SLA 3D method was affected by the pontic. Moreover, the marginal fit was affected by the build orientation. The 45° build orientation is recommended.

• 대한안전경영과학회지
• /
• 제12권3호
• /
• pp.101-106
• /
• 2010

The purposes of this paper are to investigate an effect of weight of material and gender on postural stability and to introduce formulas for those. There were five levels of weights 0, 9, 18, 27 and 36 kg, and two levels of genders were conducted. Eight male and five female subjects participated in this experiment, ten tests were performed for each level of weights to measure the postural stability by using the stability platform. The effect of the genders and the load on the postural stability were statistically analysed by the two way ANOVA test and the regression analysis. The ANOVA test showed that the effect of weights was statistically significant on postural stability to the both male and female subjects. And the postural stability of female subjects was better than that of male subjects. A linear regression formula for the balancing time and the load and a formula for the reduction rate postural stability and the relative load were introduced by the regression analysis.

• 한국의류학회지
• /
• 제22권7호
• /
• pp.851-861
• /
• 1998

The present study examined the consumer's evaluations of apparel quality and price, and the brand recognition according to the consumer's decision making styles(quality-conscious, brand-conscious, and price-conscious consumers). The two hundred and three subjects were asked to evaluate the quality and price of the two almost identical experimental blouses except for brand labels. One was the national brand, Keith and the other was the private brand, Ivy house. Also, the subjects were asked to answer if they recognize these two brands. The data were collected by self-administered questionnaire and were analyzed by frequency, percentage, one-way ANOVA, two-way ANOVA, and factor analysis. The results of the study were as floows: (1) Examining the perceptions of product qualities, generally speaking, all three types of the consumers evaluated the national brand's qualities more highly than those of the private brand. However, in-part, the price-conscious consumers evaluated some product charac-teristics more highly than those of national brand: touch of fabric, sewing, and the hemline finishing. (2) Investigating the perceptions of product prices, All three types of the consumers evaluated the price of the national brand more highly than that of the private brand. Among those, the price-conscious consumers recognized the price of the national brands most expensively. (3) Identifying the brand recognition of the two brands, the brand-conscious consumers showed the highest brand recognition and the price-conscious consumers showed the lowest brand recognition in both national and private brands, 51.9% of the total respondents identified the private brand showing comparatively high brand recognition. (4) Examining the relationship between the demographic factors and the consumer decision making styles, the monthly household income was statistically significant. Namely, 71.4% of the brand-conscious consumers have the monthly household income of 3,000,000 Won or higher which means that the higher monthly household income, the higher tendency to be brand-conscious consumers.

• Investigative Magnetic Resonance Imaging
• /
• 제21권4호
• /
• pp.223-232
• /
• 2017

Purpose: To report the use of multiband accelerated echo-planar imaging (EPI) for resting-state functional MRI (rs-fMRI) to achieve rapid high temporal resolution at 3T compared to conventional EPI. Materials and Methods: rs-fMRI data were acquired from 20 healthy right-handed volunteers by using three methods: conventional single-band gradient-echo EPI acquisition (Data 1), multiband gradient-echo EPI acquisition with 240 volumes (Data 2) and 480 volumes (Data 3). Temporal signal-to-noise ratio (tSNR) maps were obtained by dividing the mean of the time course of each voxel by its temporal standard deviation. The resting-state sensorimotor network (SMN) and default mode network (DMN) were estimated using independent component analysis (ICA) and a seed-based method. One-way analysis of variance (ANOVA) was performed between the tSNR map, SMN, and DMN from the three data sets for between-group analysis. P < 0.05 with a family-wise error (FWE) correction for multiple comparisons was considered statistically significant. Results: One-way ANOVA and post-hoc two-sample t-tests showed that the tSNR was higher in Data 1 than Data 2 and 3 in white matter structures such as the striatum and medial and superior longitudinal fasciculus. One-way ANOVA revealed no differences in SMN or DMN across the three data sets. Conclusion: Within the adapted metrics estimated under specific imaging conditions employed in this study, multiband accelerated EPI, which substantially reduced scan times, provides the same quality image of functional connectivity as rs-fMRI by using conventional EPI at 3T. Under employed imaging conditions, this technique shows strong potential for clinical acceptance and translation of rs-fMRI protocols with potential advantages in spatial and/or temporal resolution. However, further study is warranted to evaluate whether the current findings can be generalized in diverse settings.

• 대한물리의학회지
• /
• 제9권3호
• /
• pp.307-314
• /
• 2014

PURPOSE: The purpose of this study was to investigate the effects of high intensity intermittent training on cardiopulmonary capacity in canoe and kayak paddlers. METHODS: A total of 16 canoe and kayak paddlers were participated in this study. Experimental group(n=8) was performed high-intensity intermittent training and control group(n=8) was moderate intensity training. All subjects performed a treadmill test in order to compare the difference before and after the intervention. Finishing the test, all subjects were measured to their heart rate(HR), forced vital capacity(FVC), forced expiratory volume in one second (FEV1) and forced expiratory ratio(FEV1/FVC). Recovery of heart rate(RHR) was calculated using the HR. HR and pulmonary flow values was measured before and during the intervention period per 2, 4, 6 and 8 weeks. To compare the differences over time between experimental group and the control group, used(time${\times}$group) two-way repeated measures ANOVA. One-way repeated ANOVA was performed to determine where differences over time within-group. RESULTS: One-way repeated ANOVA revealed a significant difference in the experimental and control group. In experimental group, %RHR3min and FEV1 were significantly increased after 4 weeks(p<.05). Also, %RHR1min, FVC and FEV1/FVC were significantly increased after 6 weeks(p<.05). In control group, %RHR1min, %RHR3min, FVC, FEV1 and FEV1/FVC were significantly increased after 6 weeks(p<.05). CONCLUSION: Not only moderate training but also high-intensity intermittent training contributes to cardiopulmonary capacity in canoe and kayak paddlers. Although high-intensity intermittent training is very short time, the training has high degree of efficiency. Therefore, developed this training in the future, it will be better to improve the cardiopulmonary capacity for athletes and healthy people.

• 대한치과기공학회지
• /
• 제37권3호
• /
• pp.107-113
• /
• 2015

Purpose: This study provided the basic data for selecting the zirconia blocks by comparing the mechanical properties of the all ceramic crown between the domestic, import, translucent and shade blocks that were used in clinically. Methods: Currently, the most commercial block of five types(one import and two domestic block which is the translucent and shade) were used. It were elucidated by means of three point bending test, hardness test, FE-SEM observations and EDX analysis. The results were analyzed using a one-way ANOVA and Scheffe post hoc test for significant findings. Results: For flexural strength, LT specimen was the highest as 733.1 MPa, followed by JT specimen(712.0 MPa), ZT specimen(646.0 MPa), LS specimen(553.1 MPa), JS specimen(429.0 MPa). One-way ANOVA showed statistically significant difference between groups for flexural strength(p<0.05). For hardness, ZT specimen was the highest as 1556.5 Hv, followed by JT specimen(1540.3 Hv), LT specimen(1512.3 Hv), JS specimen(1472.0 Hv), LS specimen(1353.3 Hv). One-way ANOVA showed statistically significant difference between groups for hardness(p<0.05). Conclusion: Domestic block was higher than import block for flexural strength, and translucent block was higher than shade block for flexural strength. However, all blocks showed clinically acceptable range. There was no significant difference in hardness between domestic and import blocks. And significant difference was observed in translucent and shade blocks.

• Restorative Dentistry and Endodontics
• /
• 제32권1호
• /
• pp.28-36
• /
• 2007

본 연구는 광중합형 복합레진 중합 시 기존의 중합법과 가변광도 중합형인 soft start 중합법 및 exponential 중합법 간의 중합수축효과를 비교하고자 하였다. 본 연구를 위해 3종의 복합레진 (Synergy Duo Shade, Z250, Filtek Supreme) 및 3종의 광조사기 (Spectrum 800, Elipar Highlight, Elipar Trilight)를 사용하였다. 총 중합시간은 40초로 일정하게 유지하였으며, 선형 중합수축률의 측정은 linometer를 이용하였으며, 90초간의 선형 수축률을 0.5초 간격으로 측정하였다. 재료별로 각 중합 방법별 시간에 따른 중합수축률을 one-way ANOVA test로 분석하여 최종 중합수축률에 도달하는 시간을 산출하였고, 90초 후 최종 선형 중합수축률을 two-way ANOVA test를 이용하여 재료, 광조사 방법, 재료 및 광조사 방법의 교호작용이 중합수축에 미치는 영향이 있는지를 검증하였다. 또한 90초까지의 선형 중합수축률에 대한 20초까지의 선형 중합수축률의 비를 two-way ANOVA로 비교하고, 각각의 통계치를 95% Scheffe test로 검증하였는바, 다음과 같은 결과를 얻었다 1. Supreme을 제외한 다른 군에서는 재료 및 광조사 방법에 관계없이 대부분의 중합 수축이 광조사 후 20초 이내에 이루어졌다 (p < 0.05). 2. 90초 후, 최종 중합수축률은 재료 (p = 0.000)와 광조사 방법 (p = 0.003) 모두 유의성 있는 영향을 끼쳤으나, 재료와 광조사 방법 상호간의 작용은 영향이 없었다. 3. 90초 후 최종 중합수축률은 총 광에너지가 가장 낮은 exponential 중합법에서 유의성 있게 낮았다 (p < 0.05). 4. 20초까지의 초기 수축률은 soft start와 exponential중합법 등 가변광도 중합이 conventional 중합법에 비하여 유의성 있게 낮은 수축률을 보였다 (p < 0.05). 본 실험 결과만을 토대로 볼 때, 가변광도 중합법은 초기 중합수축 속도를 감소시켜 수축응력을 감소시킨다고 볼 수 있다. 그러나 총 조사 광에너지의 차이로 인해 그 물리적 성질에 영향이 있을 수 있으므로 향후 이에 대한 더 많은 고찰이 필요할 것으로 사료된다.

• 한국의상디자인학회지
• /
• 제14권2호
• /
• pp.101-111
• /
• 2012

The purpose of this study is to evaluate the differences of visual image on variations in the length and princess line, in a silhouette of a one-piece dress with the application of the 3D Virtual Clothing System known as i-designer. Eight sample were examined: 2 variations of the length and 2 variations of the princess line, 2 variations of the form of a silhouette. The data was obtained from 66 fashion design majors. The data was assessed by a t-test and a multi-way ANOVA and factor analysis. The results were as follows; The visual image according to the design variables, four factors were selected; the attractiveness factor, the activeness factor, the practicality factor, the elegance factor. In these factors, the attractiveness factor is estimated by the most important factor. As a result of analyzing the effect of the interaction in the visual image according to the design variables, the influence of the main effect was found to be great in each factor. In the activeness factor, a significant difference was noted in the two-way interaction between the length and the princess line, the length and the silhouette. In the elegance factor, a significant difference was noted in the two-way interaction between the length and the silhouette. However, the influence on three-way interaction among the length, the princess line, and the silhouette was not significant.

• 산업경영시스템학회지
• /
• 제35권3호
• /
• pp.118-128
• /
• 2012

An attempt is given to the problem of analyzing the two-way binary attribute data using the logistic regression model in order to find a sound statistical methodology. It is demonstrated that the analysis of variance (ANOVA) may not be good enough, especially for the case that the proportion is very low or high. The logistic transformation of proportion data could be a help, but not sound in the statistical sense. Meanwhile, the adoption of generalized least squares (GLS) method entails much to estimate the variance-covariance matrix. On the other hand, the logistic regression methodology provides sound statistical means in estimating related confidence intervals and testing the significance of model parameters. Based on simulated data, the efficiencies of estimates are ensured with a view to demonstrate the usefulness of the methodology.