• 전자공학회논문지
• /
• 제54권7호
• /
• pp.127-132
• /
• 2017

이 논문에서는 모델 기반 설계에 근거한 이륜 도립진자 로봇의 제어이득을 설계하고 NXT 마인드스톰과 RobotC 언어를 이용하여 수업에 활용 가능한 로봇을 제작 및 실험한다. 이륜 도립진자 로봇은 NXT 마인드스톰, 서보 직류전동기, 자이로 센서, 가속도 센서로 구성된다. 직류전동기에 내장된 엔코더를 이용하여 바퀴의 회전각을 검출하며 이동평균을 이용하여 바퀴의 회전각속도를 계산한다. 자이로 센서는 몸체의 피치 각속도를 측정하며 가속도 센서는 몸체의 피치 각도를 측정한다. 자이로와 가속도의 센서 융합을 통해 몸체 각도를 계산한다. 제어기 이득 요소는 휠 각도, 휠 각속도, 몸체 피치 각도, 몸체 피치 각속도에 대한 가중치이다. 이들 제어이득의 변화에 따른 도립진자 로봇의 변화를 실험하며 유용성을 확인한다.

• 한국정밀공학회지
• /
• 제28권10호
• /
• pp.1181-1188
• /
• 2011

A control system for stabilizing a small robot or inverted pendulum using twisted gyro wheel is proposed. Conventional stabilizer using inertial wheel employs action-reaction force/torque to control a pendulum, which can generate relatively small torque and short period of output. In this paper, a novel actuation method using twisted gyro torque in 3-dimentional space was proposed to stabilizing a pendulum by twisting the assembly including a rotating gyro wheel. In addition, two special control functions for this type of twisted gyro wheel were designed. One is the function of self-adjusting the mass center of the robot and the other is the torque reloading configuration for continuous torque generation. The proposed system was verified by experimental result and simulation. The designed twisted gyro wheel control system can be easily packed in a small size module and installed in a humanoid robot or inverted pendulum type mechanism.

• 로봇학회논문지
• /
• 제6권2호
• /
• pp.108-117
• /
• 2011

This paper proposes an optimal ARS control of a two-wheel mobile inverted pendulum robot. Conventional researches are highly concentrated on the robust control of a mobile inverted pendulum on the flat ground, $i.e.$, mostly focus on the compensation of gyroscope signals. This newly proposed algorithm deals with a climbing control of a slanted surface based on the dynamic modeling using the conventional structure. During the climbing control of the robot, unexpected disturbance forces are essentially caused by the irregular contact force which comes from the irregular contact angle between the wheel and the terrain. The disturbances have effects on the optimal posture of the mobile robot to compensate the slanted angle. Therefore the dynamics equations through physical interpretation are derived for the selection of optimum climbing posture through ARS. Also using the ultrasonic sensor the slope information is obtained to compensate for the force of gravity. The control inputs are dynamically adjusted to climb up the slanted surface effectively. The proposed algorithm is demonstrated through the real experiments.

• 로봇학회논문지
• /
• 제4권4호
• /
• pp.289-297
• /
• 2009

This paper presents the development and control of a two wheeled car-like mobile robot using balancing mechanism whose heading control is done by turning the handle. The mobile inverted pendulum is a combined system of a mobile robot and an inverted pendulum system. A sensor fusion technique of low cost sensors such as a gyro sensor and a tilt sensor to measure the balancing angle of the inverted pendulum robot system accurately is implemented. Experimental studies of the trajectory following control task has been conducted by command of steering wheel while balancing.

• 한국컴퓨터정보학회논문지
• /
• 제16권7호
• /
• pp.157-163
• /
• 2011

본 논문에서는 ARS(Attitude Refrence System)를 이용하여 모바일 역진자 로봇의 수평유지와 주행을 위한 자세 제어를 연구하였다. 현재 미국 및 여러 나라에서는 모바일 역진자 로봇에 대한 많은 연구가 진행되고 있으며 이를 이용한 세그 웨이 등을 개발하고 있다. 이러한 2자유도를 이용한 모바일 역진자 로봇은 다양한 모드로 움직일 수 있다. 모바일 역진자 로봇이 2바퀴로 수직 자세를 취하면 시스템이 안정을 취하기 위하여 항상 앞, 또는 뒤로 넘어지려는 성질을 가진다. 현재 자이로센서와 가속도센서를 혼합하는 알고리즘은 칼만필터가 일반적으로 이용되고있으며 많은 연구가 진행되고 있다. 본 연구에서 ARS는 2축의 자이로 각(roll, pitch)과 3축의 가속도계 값(x, y, z)값으로 자세를 계산하도록 하였다. 본 논문은 자율주행시스템인 2발 로봇 시스템으로 간단하지만 원하는 성능을 발휘할 수 있는 ARS와 PID 알고리즘을 이용한 자세 제어를 실현하였다.

• 제어로봇시스템학회논문지
• /
• 제20권5호
• /
• pp.537-542
• /
• 2014

This paper proposes a control system to keep the balance of a unicycle robot. The robot consists of the disk and wheel, for balancing and driving respectively, and the tile angle is measured and used for balancing by the IMU sensor. A PID controller is designed based on a non-model based algorithm to prove that it is possible to control the unicycle robot without any approximated linear system model such as the sliding mode control algorithm. The PID controller has the advantage that it is simple to design the controller and it does not require an unnecessary complex formula. In this paper, assuming that the pitch and roll axis are dynamically decoupled, each of the two controllers are designed separately. A reaction wheel pendulum method is used for the control of the roll axis, that is, for balancing and an inverted pendulum concept is used for the control of the pitch axis. To confirm the performance of the proposed controllers using MATLAB Simulink, the dynamic equations of the robot are derived.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2001년도 추계학술대회 논문집
• /
• pp.233-238
• /
• 2001

The mechanism design of the interactive emotional robot has been carried out. The two-wheeled inverted pendulum type mechanism was adopted to improve the mobility and make the innate clumsy monoaxial bicycle motion. Even though the system is unstable in itself, it is expected for the robot to move freely in a plane, keeping the upright position only with two wheels. Two motors attached on head can make 4 motion sets, and two motors on the wheels can make 8. Therefore, 32 independent motion sets can be achieved from the robot to communicate the emotions with humans. The motion's equation of the robot was derived based on nonholonomic dynamics, and the necessary power to the wheel's rotational axis was found by simulation.

• 전자공학회논문지SC
• /
• 제45권1호
• /
• pp.1-8
• /
• 2008

자유롭고 빠르게 이동할 수 있도록 도와주는 개인 이동 수단인 two-wheel balancing vehicle은 inverted pendulum 시스템의 원리를 이용한 것으로, 최근 들어 많은 연구가 이루어지고 있고 이를 이용한 제품이 실제 사용되고 있다. 본 논문에서는 일반적인 PID 제어이론을 이용한 two-wheel balancing vehicle에 대한 제어성능을 개선시키는 새로운 제어방식을 제안한다. 제안한 방식은 퍼지 PD+I 제어방식으로 향상된 PID 제어의 일종으로 2개의 입력과 1개의 출력을 가진 퍼지시스템에 적분 신호를 더함으로써 출력신호를 만든다. 퍼지시스템의 비선형성은 시간공정에서 비례신호와 미분신호의 가중치를 변화함으로써 최적의 출력제어신호를 만들어낸다. 제안한 퍼지 PD+I 제어방식의 유용성을 알아보기 위해 two-wheel balancing mobile robot에 대해 시뮬레이션과 실험의 결과를 통해, 제안한 퍼지 PD+I 제어방식이 일반적인 PID 방식보다 우수한 성능을 가지고 있음을 알 수가 있다.

• 로봇학회논문지
• /
• 제8권4호
• /
• pp.229-237
• /
• 2013

In this paper, we report a self-balancing robot wheelchair which has the capability of keeping upright posture regardless of the terrain inclination in terms of the three dimensional balancing motion. It has the mobility of five degrees of freedom, where pitching, yawing, and forward motions are generated by the two-wheeled inverted pendulum mechanism and the rolling and vertical motions are implemented by the movement of the tilting mechanism. Several design considerations are suggested for the sliding type vehicle body, wheel actuator module, tilting actuator module, power and control system, and the riding module.

• 제어로봇시스템학회논문지
• /
• 제18권3호
• /
• pp.275-284
• /
• 2012

This paper proposes an attitude and direction control of a single wheel balanced robot. A unicycle robot is controlled by two independent control laws: the mobile inverted pendulum control method for pitch axis and the reaction wheel pendulum control method for roll axis. It is assumed that both roll dynamics and pitch dynamics are decoupled. Therefore the roll and pitch dynamics are obtained independently considering the interaction as disturbances to each other. Each control law is implemented by a controller separately. The unicycle robot has two DC motors to drive the disk for roll and to drive the wheel for pitch. Since there is no force to change the yaw direction, the present paper proposes a method for changing the yaw direction. The angle data are obtained by a fusion of a gyro sensor and an accelerometer. Experimental results show the performance of the controller and verify the effectiveness of the proposed control algorithm.