• 대한치과보철학회지
• /
• 제34권2호
• /
• pp.373-383
• /
• 1996

In order to compare the accuracy of impression method using addition silicone putty impression material, metal master die was fabricated with 4 cylindrical abutments that were similar in shape to mandibular arch. Among the 4 abutments, two(A, D) with 8mm width and 7mm height were formed in the 2nd molar regions and the other two(B, C) with 6mm width and 7mm height were on the canine regions. Impressions were taken using one-step putty wash impression technique and two-step putty wash impression technique by three different types of impression materials(Perfect, Express, Exaflex). Upon measuring the distance between the abutments on the model by three dimensional measuring machine, the percent of devitaion of the materials were obtained, rendering the following results. The results obtained are as follows : 1. There was no significant difference in accuracy in regard with the impression method between one-step putty wash impression technique and two-step putty wash impression technique using addition silicone putty impression material. 2. There were no difference in accuracy among with three different addition silicone putty impression materials. 3. All the distances between abutments on improved stone models increased in comparison with those on the metal master model.

• Communications for Statistical Applications and Methods
• /
• 제18권4호
• /
• pp.433-443
• /
• 2011

잉여금의 수준에 따라 이단계의 보험요율이 적용되는 복합 포아송 위험 모형을 고려한다. 먼저 이 위험 모형에 대응되는 이단계 서비스율의 M/G/1 대기행렬 모형을 설정하고, M/G/1 대기행렬 모형에서 작업량이 0에 도달하기 전에 과부하가 발생하는 확률을 유도한다. 이과부하 확률을 이용하여 위험모형에서 잉여금이 목표값에 도달하기 전에 파산하는 확률을 구하고, 보험 청구액이 지수분포를 따르는 경우의 파산 확률을 계산한다.

• 대한기계학회논문집B
• /
• 제24권10호
• /
• pp.1368-1379
• /
• 2000

A numerical study on swirling pulverized coal combustion in an axisymmetric enclosure is carried out by applying the 2-phase weighted sum of gray gases model (WSGGM) approach with the discrete ordinate method (DOM) to model the radiative heat transfer equation. In the radiative transfer equation, the same polynomial equation and coefficients for weighting factors as those for gas are adopted for the coal/char particles as a function of partial pressure and particle temperature. The Eulerian balance equations for mass, momentum, energy, and species mass fractions are adopted with the standard and RNG k-${\varepsilon}$ turbulence model, whereas the Lagrangian approach is used for the particulate phase. The eddy-dissipation model is employed for the reaction rate for gaseous mixture, and the single-step and two-step first-order reaction model for the devolatilization process for coal. Special attention is given to establish the thermal boundary conditions on radiative transfer equation By comparing the numerical results with experimental ones, the radiation model used here is confirmed and found to provide an alternative for simulating the radiative transfer.

• 한국경영과학회지
• /
• 제16권2호
• /
• pp.49-64
• /
• 1991

In this paper, we present a stepwise design methodology for relational databases using a new conceptual data model, the MAO(Multiple Aspects-based Object) model. Our methodology consists two steps : first, data requirements are conceptualized using the MAO model with concepts such as objects types and aspect types : second, the MAO model is transformed into the third normal form inn the relational model supported by commercial DBMs. A top-down approach is used for the MAO modelling in the first, step, and the transformation process in the second step can be automated. Our methodology supports easier and more database design of real world than other methodologies using existing data models.

• 한국유체기계학회 논문집
• /
• 제3권3호
• /
• pp.7-11
• /
• 2000

A numerical study based on the three-dimensional thin-layer Navier-Stokes solver is carried out to analyze the flowfield through a single stage transonic compressor. Explicit fout-step Runge-Kutta scheme with spatially variable time step and implicit residual smoothing is used. The governing equations we discretized with explcit finite difference method. Mired-out average method is used at the interface between rotor and stator. And, an artificial dissipation model is used to assure the stability of solution. The results with k-w turbulence model were compared to the results with Baldwin-Lomax model, and physical phenomena of transonic compressor are presented. The two turbulence models give the results that show reasonably good agreements with experimental data.

• 소성∙가공
• /
• 제16권4호
• /
• pp.239-243
• /
• 2007

Superplastic forming/diffusion bonding(SPF/DB) has been widely used in the automotive and aerospace industry since it has great advantages to produce very light and strong components. Finite element method(FEM) is used to model the SPF/DB process of 3-sheet sandwich panel to predict the pressure-time curve and to analyze the process parameters. In order to eliminate defects of the part, a new pressurization scheme is proposed. Contrary to the conventional one-step pressurization, which causes the folding at the DB joint, two-step pressurization can eliminate the folding. Effect of pressurization cycle was investigated by using FE analysis and proper pressurization cycle is proposed.

• 대한치과보철학회지
• /
• 제48권4호
• /
• pp.243-250
• /
• 2010

연구 목적: 본 연구는 잘 맞는 임플란트 상부구조물에서 서로 다른 나사조임순서와 조임방법이 나사의 풀림토크값에 미치는 영향을 평가하였다. 연구 재료 및 방법: 서로 수동적 적합 관계를 갖는 완전 무치악 하악 주모형과 네 개의 평행한 임플란트 (Astra Tech)에 직접 연결되는 금속구조물을 제작하였다. 금속구조물과 잘 맞는 실험모형을 위해 주모형에서 연결인상법을 이용하여 여섯 개의 경석고 모형을 얻었다. 20 Ncm로 조인 후 나사의 풀림토크값을 두 번 측정하였다. 세 가지 나사조임순서 (1-2-3-4, 2-4-3-1, 그리고 2-3-1-4)와 두 가지 나사조임방법 (two-step과 one-step)에 대한 나사의 풀림토크값과 최소풀림토크값을 유의수준 .05에서 각각 다원분산분석법 (multi-way ANOVA)과 이원분산분석법 (two-way ANOVA)을 이용하여 통계분석 하였다. 결과: 나사조임순서에 대한 나사의 평균 풀림토크값은 12.8 Ncm (2-4-3-1)에서 13.1 Ncm (2-3-1-4)의 값을 보였고, 나사조임방법에 대한 값은 13.1 Ncm (two-step)와 11.8 Ncm (one-step)였다. 나사조임순서에 대한 나사의 평균 최소풀림토크값은 11.1 Ncm (1-2-3-4)와 11.2 Ncm (2-4-3-1과 2-3-1-4)였고, 나사조임방법에 대한 값은 11.2 Ncm (two-step)와 9.9 Ncm (one-step)였다. 나사의 풀림토크값과 최소풀림토크값은 세 가지 나사조임순서 간에 통계학적으로 유의성 있는 차이가 없었다. 그러나 두 가지 나사조임방법 간에는 두 값 모두 통계학적으로 유의성 있는 차이가 있었다. 나사를 두 단계로 나누어 조이는 방법이 한 번에 조이는 방법보다 더 큰 풀림토크값 (P = .0003)과 더 큰 최소풀림토크 값 (P = .0035)을 보였다. 결론: 본 연구와 같은 조건하에서, 연결인상법으로 얻은 잘 맞는 임플란트 상부구조물에 있어서 나사조임순서는 나사의 풀림토크값에 영향을 미치는 중요한 요소는 아니었다. 그러나 나사를 두 단계로 나누어 조이는 방법은 한 번에 조이는 방법보다 더 큰 풀림토크값을 보였다.

• Korean Chemical Engineering Research
• /
• 제61권1호
• /
• pp.89-96
• /
• 2023

동적 선형 블록과 정적 비선형 블록이 직렬로 연결되어 있는 Wiener형 비선형 모델은 여러 화학 공정의 동특성을 묘사하는데 널리 사용되는데, Wiener형 비선형 공정의 모델 확인은 다소 긴 공정 활성화 데이터가 필요하다. 본 연구는 이러한 단점을 보완하기 위하여 단일 계단 응답으로부터 Wiener형 비선형 공정 모델을 찾아낼 수 있는 새로운 모델 확인 방법을 제안한다. 제안된 방법은 계단 응답의 초기 응답으로부터 선형 동적 블록의 예측 응답을 얻어 선형 동적 블록의 모델을 확인하고, 이어서 비선형 정적 블록의 모델을 확인한다. 본 방법은 단일 계단 응답만을 사용하여 공정 모델 확인을 위해 필요한 공정 응답을 얻는 과정에서 시간과 비용적으로 큰 이득을 얻을 수 있다. 제안된 공정 확인 방법의 성능은 대표적인 Wiener형 비선형 공정인 pH 적정 공정과 액위 공정을 대상으로 검증되었다.

• IEIE Transactions on Smart Processing and Computing
• /
• 제1권2호
• /
• pp.78-87
• /
• 2012

In this paper, we address the tracking problem caused by camera motion and rolling shutter effects associated with CMOS sensors in consumer handheld cameras, such as mobile cameras, digital cameras, and digital camcorders. A modified particle filtering method is proposed for simultaneously tracking objects and compensating for the effects of camera motion. The proposed method uses an elastic registration algorithm (ER) that considers the global affine motion as well as the brightness and contrast between images, assuming that camera motion results in an affine transform of the image between two successive frames. By assuming that the camera motion is modeled globally by an affine transform, only the global affine model instead of the local model was considered. Only the brightness parameter was used in intensity variation. The contrast parameters used in the original ER algorithm were ignored because the change in illumination is small enough between temporally adjacent frames. The proposed particle filtering consists of the following four steps: (i) prediction step, (ii) compensating prediction state error based on camera motion estimation, (iii) update step and (iv) re-sampling step. A larger number of particles are needed when camera motion generates a prediction state error of an object at the prediction step. The proposed method robustly tracks the object of interest by compensating for the prediction state error using the affine motion model estimated from ER. Experimental results show that the proposed method outperforms the conventional particle filter, and can track moving objects robustly in consumer handheld imaging devices.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.197-200
• /
• 2002

In this paper, roll damping coefficients for a non-conventional cross section, which is herein named as 'step' model, are investigated numerically and experimentally. Experiments are extensively carried out to estimate the roll damping coefficients. Numerical estimations are also made with the help of numerical codes. For convenience, the roll damping is divided into wave-making component and viscous component. The wave-making component is determined using a potential code and the viscous component using a viscous flow code, in which the fluid domain is taken as unbounded. In order to validate the present approach, a typical cross section with bilge is considered and our results are compared with published data. The comparison shows a good agreement qualitatively. For the step model, numerical results are compared well with experimental data besides some quantitative discrepancies at a certain range of frequency. It is thought that the discrepancy might be caused by the ignorance of the free surface in viscous computations. It is found in the case of the step model that not only the viscous component but also the wave component increases considerably compared to the section with bilge.