• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.5
• /
• pp.286-291
• /
• 2014

In this study, novel ultrasonic rotary motor of hexadecagon shape stator was proposed. Stator of the hexadecagon ultrasonic motor was composed of an elastic ring and ceramics. The elastic ring had sixteen sides and sixteen angular points. Eight ceramics were attached on the outer surface of the eight sides of the ring. When rotor of cylindrical shaft was inserted inside of the ring stator, central lines of the sixteen sides of the stator hold the shaft by the slight pressures(frictions). This slight pressure was a preload of the motor and it could be controlled by radius and thickness of the ring. When two sinusoidal voltages which have 90 degree phase difference were applied to each four ceramics, elliptical displacements of inner surface of the ring were obtained. These elliptical displacements of the inner surface rotated the shaft rotor through the frictions. The proposed hexadecagon ultrasonic motor was designed and analyzed by using the finite element method (FEM), depending on materials of the elastic ring. Based on the FEM results, one model of motor which showed maximum displacement at contact points was chosen and fabricated. And characteristics of the motor were compared with simulated results. When the motor was fabricated with these results, EL20ET0.5CT0.5CW2 model showed 115[rpm] speed about input voltage of 60[Vrms] at 65.6[kHz]. And the maximum torque of 6[gfcm] was obtained. From these results, the hexadecagon shaped ultrasonic motor can be used to actuator for optical device which needs detailed position control. Also it can be used to medical and portable device by reducing size and weight.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.1
• /
• pp.35-45
• /
• 2013

The concrete-filled tube column has the excellent structural performance. But it is difficult to connect with column and beam because of closed section. It suggests that pipe should be produced by welding two sides together where two shapes are joined after a channel is pre-welded onto the three sides in order to form an internal diaphragm. The upper diaphragm of the connection used the horizontal plate and the lower diaphragm used the Vertical plate. This research performed 6 monotonic tension experiments describing the connection upside and downside in order to evaluate the structural capability of the offered connection. And the cyclic loading experiment was performed about 2 T-Type column to beam connections. As to the experimental result edge cutting geometry, there was no big effect. An increase in the number of holes of the plate ultimate strength was increased by 5% and The thickness of the plate increases, the maximum strength was increased by 4%. T-Type connections until it reaches the plastic moment showed a stable behavior.

• Journal of Society of Preventive Korean Medicine
• /
• v.9 no.2
• /
• pp.77-91
• /
• 2005

The purpose of this study is to examine the recognition of the student of oriental medical school on cooperative system between Oriental and Western medicine and to provide basic information for the development of oriental medicine. In order to look at the level of recognition on cooperative system between Oriental and Western medicine, from September 1st to 15th of 2005, this study had been conducted through personal interview and questionnaires to 600 students who were attending the Department of Oriental Medicine (in both prep and regular courses) in D University, located in the City of Daegu. The data has been analyzed using statistic program, the SPSS WIN 12.0. Statistical analysis tools used for this study were frequency analysis, cross-over analysis and the t-test. The results are as follows; The students of oriental medical school had relatively high level of recognition on the basic concept, interests, necessity and potential for cooperative system between Oriental and Western medicine. However, they had negative understandings on the issue of unification of the two medical systems and it's possibility in the future. The students were optimistic about possible merits of cooperative system between Oriental and Western medicine, especially in the field of rehabilitation. On the reasons for lack of development of cooperative system between Oriental and Western medicine, the students listed prejudices existing on both sides firstly, followed by their contrasting approach on human illness, lack of legal and institutional support system, the indifferences of doctors and indifferences of oriental medical doctors. In addition, students understood that the dualism existing in our current medical system is aggravating mutual distrust between the two sides, causing the confusion of patients on the choice of medical facilities, and raising their medical bills. Therefore, in order to vitalize collaboration between Oriental and Western medicine in new health care environment, the following measures should be needed decreasing the prejudices between the two medical spheres with open mind improving educational programs in Western and Oriental medical schools; promoting joint academic research or exchange programs between the schools, and increasing government effort to minimize legal and institutional restrictions cooperative system between Oriental and Western medicine.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.3_4
• /
• pp.407-417
• /
• 2003

The purpose of this study is to develop designs and patterns of a functional brassiere. For this purpose, women who have protruding and drooping breasts with 75B for their brassiere size were sampled. The fitting test for the fitness and function of test brassiere and control brassiere were carried out twice and compared the results from the both in terms of front, rear and side looks. The results of this study can be summarized as follows; 1. The results from measuring the level of sag and spread, and volume and protrusion of breasts shows that there are some distinctive differences in the measurements before and after wearing the test brassiere and the test brassiere is proved to be very effective in correcting breasts' shapes. 2. Front look: Since the two front cutting lines of the test brassiere served to have the curved main part pressing against the breasts, it could support breasts to more than satisfactory level. In addition, upperline panel and side panels of the test brassiere were found to have the upperline of the upper cup pressed against the breasts and at the same time it pressed and gathered the flab around upper part of the breasts and armpits that helped to rearrange the shape of the breasts. It is also proved that the two-pieced test brassier was found to be more functional in supporting the lower cup of the breasts. 3. Rear look: The test brassier was made up of two wide U-shaped wings with 2.5cm tape on its lower sides. Each wing has 4 lines and 3 hems (5.5cm). For this reason, the test brassiere was tighter and better fitted on its back. 4. Side look and entire look: The wings of the test brassiere might look wider than that of the control brassier which has conventional straight-shaped wings, but it was analyzed that the test brassiere held the upper and lower sides of the wings more effectively to be more pressed against the breast. Therefore, the test brassiere scored higher in terms of adjusting to body movements, while the control brassiere looked better in overall terms. 5. The functional brassier fur protruding and drooping breasts developed from the experiments of this study is a full side stretch brassiere which covers the entire breasts satisfactorily. The pattern drafting methods are suggested in to .

• Journal of Chest Surgery
• /
• v.7 no.2
• /
• pp.163-168
• /
• 1974

Five cases of traumatic diaphragmatic hernia were repaired in the Department of Thoracic Surgery, Seoul National University Hospital, during the period from 1967 to 1974. The first case, a 14-year aid girl, was diagnosed as diaphragmatic hernia during laparotomy because of jejunal perforation 3 days after traffic accident. Herniated stomach, transverse colon, spleen and left lobe of the liver were repositioned and the diaphragmatic rupture on left posterolateral portion was repaired with two layers of nonabsorbable sutures by transthoracic approach. The second case, a 26-year old man,was diagnosed immediately after traffic accident at a local clinic and transferred to this hospital 24 hours later. Herniated stomach, transverse colon and jejunum were repositioned amd diaphragmatic rupture,about 9 cm in length,from the posterolat.edge to the base of pericardium was sutured in two layers. The third case, a 26-year old man who had stab wound on the left lower lateral chest two years ago,was admitted with sudden abdominal pain and vomiting. Upper gastrointestinal series with barium meal revealed diaphragmatic hernia. The herniated stomach and transverse colon through the defect,about 3.5cm in diameter, at anterolateral portion on the left side,were repositioned and repaired with two layers of nonabsorbable sutures. The forth case, a 26-year old man, sustained blunt trauma to the chest by a roller and was transferred to the emergency room complaining of dyspnea 40 minutes after the accident. The diaphragmatic rupture extended from left midaxillary line to contralateral anterior axillary line,about 20cm long, at anterior portion of diaphragm, which was repaired with two layers, of nonabsorbable sutures. The fifth case, a 4-year old girl, had two separate diaphragmatic ruptures on both sides, which were caused by traffic accident. Immediate upper gastrointestinal series after injury showed herniated stomach, colon and spleen into left Chest cavity. Another small rupture with anterior edge of right lobe of the liver in chest cavity was noted. These were repaired with non-absorbable sutures via thoracotomy.

• Journal of the korean society of oceanography
• /
• v.33 no.3
• /
• pp.53-63
• /
• 1998

The Princeton ocean model (POM) with free surface in sigma-coordinate, governed by primitive equations, is used to examine the response of sea water in Deukryang Bay to a typhoon. The model reproduces reasonably well the main features in the wind-driven dynamics due to passing of a typhoon. In response to the wind, the coastal jet develops and the upwelling(or downwelling) occurs dominantly in both sides of the bay. This result implies that there should be an overturn in the bay water with the passing of typhoons. Numerical results of POM are also compared to those of a depth-averaged model. From the comparison, it is postulated that the bottom drag coefficient conventionally used for the two-dimensional flow models is inadequate due to overestimation of the computed current field.

• Transactions of the Korean hydrogen and new energy society
• /
• v.16 no.3
• /
• pp.284-289
• /
• 2005

Thermal analysis of cryogenic-capable vessels with insulations have been carried out to store liquid hydrogen($LH_2$). The combined insulations of MLI(Multi-Layer Insulation) and VCS(Vapor-Cooled Shield) under high vacuum are considered in the analysis for various volumes of vessels. Vapor-Cooled Shields(VCS) are installed at cylinder wall as well as disc side of the $LH_2$ vessels. The results indicate that optimal distribution of boiloff vapor from $LH_2$ vessel into two sides of VCS exists based on the evaporation loss. As the volume of $LH_2$ vessel is increased, mass flow rate of boiloff is increased while the evaporation loss per unit volume is decreased.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2803-2810
• /
• 2007

Three dimensional numerical studies were carried out to investigate the effect of aspect ratio on gas slip flow in rectangular microchannels. We focused on aspect ratio effect on slip velocity, pressure distribution and mass flow rate. As aspect ratio decreases the wall slip velocity also decreases. As a result nonlinearity of pressure distribution increases. The slip velocities on sides and top/bottom walls are different and this difference decreases with increasing aspect ratio. These two velocities are equal when aspect ratio is 1. The ratios of slip mass flow rate over noslip mass flow rate increases with increasing aspect ratios.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1994.09a
• /
• pp.231-234
• /
• 1994

Concentrated stresses due to the tunnel excavation easily cause failure around opening in the soft rock mass layer. Thus, while excavatng tunnel in the soft rock mass layerm it is very important to predict the possibility of failure or yielding zones around tunnel boundary. There are two typical methods to predict these; 1) the analysis of field monioring data and 2) numerical analysis. In this study, it was attempted to describe the time-dependent or progressive rock mass manner due to the continuous failure and fracturing caused by surrounding underground openings using the second method. In order to apply the effects of progressive failure underground, an iterative technique was used with the Hoek and Brown rock mass failure theory. By developing and simulating, three different shapes of twin tunnels, this research simulated and estimated the proper size of critical pillar width between tunnels, distributed stresses on the tunnel sides, and convergences of tunnel crowns. Moreover, results out progressive failure technique based on the Hoek and Brown theory were compared with the results out of Mohr-Coulomb theory.

• Journal of Biosystems Engineering
• /
• v.24 no.2
• /
• pp.145-152
• /
• 1999

Methods of discharging each graded agricultural product are divided into two according to the type of feeding. One is based on feeding objects using a series of specially designed holders mounted with an equal interval. The other is randomly feeding objects while being isolated without a specific interval. In this paper, a real time simultaneous discharge algorithm, which is good for objects randomly fed individually and for multi-objects located along a series of discharge buckets, was developed. And the developed algorithm was implemented to the controller and the performance was verified using the system developed for dried mushrooms. The discharge system used for the experiment was composed of a variable speed conveyor, a series of double channel bucket mounted along both sides of the conveyor, and a series of air nozzles and optic sensors. Developed algorithm worked perfectly and could be directly used for automatic discharge system for randomly feeding agricultural products.