• Structural Engineering and Mechanics
• /
• 제53권4호
• /
• pp.725-744
• /
• 2015

In this paper, a new damage indicator based on mode shape data is introduced to identify damage in beam structures. In order to construct the indicator proposed, the mode shape, mode shape slope and mode shape curvature of a beam before and after damage are utilized. Mode shape data of the beam are first obtained here using a finite element modeling and then the slope and curvature of mode shape are evaluated via the central finite difference method. In order to assess the robustness of the proposed indicator, two test examples including a simply supported beam and a two-span beam are considered. Numerical results demonstrate that using the proposed indicator, the location of single and multiple damage cases having different characteristics can be accurately determined. Moreover, the indicator shows a better performance when compared with a well-known indicator found in the literature.

• Smart Structures and Systems
• /
• 제32권1호
• /
• pp.1-7
• /
• 2023

In modal analysis, the mode shape reflects the vibration characteristics of the structure, and thus it is widely performed for finite element model updating and structural health monitoring. Generally, the acceleration-based mode shape is suitable to express the characteristics of structures for the translational vibration; however, it is difficult to represent the rotational mode at boundary conditions. A tilt sensor and gyroscope capable of measuring rotational mode are used to analyze the overall behavior of the structure, but extracting its mode shape is the major challenge under the small vibration always. Herein, we conducted a feasibility study on a multi-mode shape estimating approach utilizing a single physical quantity signal. The basic concept of the proposed method is to receive multi-metric dynamic responses from two sensors and obtain mode shapes through bridge loading test with relatively large deformation. In addition, the linear transformation matrix for estimating two mode shapes is derived, and the mode shape based on the gyro sensor data is obtained by acceleration response using ambient vibration. Because the structure's behavior with respect to translational and rotational mode can be confirmed, the proposed method can obtain the total response of the structure considering boundary conditions. To verify the feasibility of the proposed method, we pre-measured dynamic data acquired from five accelerometers and five gyro sensors in a lab-scale test considering bridge structures, and obtained a linear transformation matrix for estimating the multi-mode shapes. In addition, the mode shapes for two physical quantities could be extracted by using only the acceleration data. Finally, the mode shapes estimated by the proposed method were compared with the mode shapes obtained from the two sensors. This study confirmed the applicability of the multi-mode shape estimation approach for accurate damage assessment using multi-dimensional mode shapes of bridge structures, and can be used to evaluate the behavior of structures under ambient vibration.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제3권4호
• /
• pp.188-193
• /
• 2003

This paper describes a novel burst-mode clock and data recovery (CDR) circuit which can be used for 622Mbps burst mode applications. The CDR circuit is basically a phase locked loop (PLL) having two phase detectors (PDs), one for the reference clock and the other for the NRZ data, whose operations are controlled by an external control signal. This CDR was fabricated in a 1-poly 5-metal $0.25{\;}\mu\textrm{m}$ CMOS technology. Jitter generation, burst/continuous mode data receptions were tested. Operational frequency range is 320Mhz~720Mhz and BER is less than 1e-12 for PRBS31 at 622Mhz. For the same data sequence, the extracted clock jitter is less than 8ps rms. Power consumption of 100mW was measured without I/O circuits.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.1105-1108
• /
• 1999

In this paper, we propose a new addressing mode, which can be used for programmable image processor to perform image- processing algorithms effectively. Conventional addressing modes are suitable for one-dimensional data processing such as voice, but the proposed addressing mode consider two-dimensional characteristics of image data. The proposed instruction for two-dimensional addressing requires two operands to specify a pixel and doesn't require any change of memory architecture. Combining several instructions to load a pixel-data from an external memory to a register, the proposed instruction reduces code size so that satisfy hish performance and low power requirements of image processor. In addition, it uses inherent two-dimensional characteristics of image data and offers user-friendly instruction to assembler programmer.

• Smart Structures and Systems
• /
• 제11권6호
• /
• pp.569-587
• /
• 2013

This paper evaluates the closed loop performance of the reaching law based discrete sliding mode controller with multisensor data fusion (MSDF) in real time, by controlling the first two vibrating modes of a piezo actuated structure. The vibration is measured using two homogeneous piezo sensors. The states estimated from sensors output are fused. Four fusion algorithms are considered, whose output is used to control the structural vibration. The controller is designed using a model identified through linear Recursive Least Square (RLS) method, based on ARX model. Improved vibration suppression is achieved with fused data as compared to single sensor. The experimental evaluation of the closed loop performance of sliding mode controller with data fusion applied to piezo actuated structure is the contribution in this work.

• Structural Monitoring and Maintenance
• /
• 제5권3호
• /
• pp.379-390
• /
• 2018

In this paper, a novel and effective damage diagnosis algorithm is proposed to detect and estimate damage using two stages least squares support vector machine (LS-SVM) and limited number of attached sensors on structures. In the first stage, LS-SVM1 is used to predict the unmeasured mode shapes data based on limited measured modal data and in the second stage, LS-SVM2 is used to predicting the damage location and severity using the complete modal data from the first-stage LS-SVM1. The presented methods are applied to a three story irregular frame and cantilever plate. To investigate the noise effects and modeling errors, two uncertainty levels have been considered. Moreover, the performance of the proposed methods has been verified through using experimental modal data of a mass-stiffness system. The obtained damage identification results show the suitable performance of the proposed damage identification method for structures in spite of different uncertainty levels.

• 대한간호학회지
• /
• 제33권5호
• /
• pp.538-543
• /
• 2003

Purpose: The purpose of this study was to identify the stress and the coping methodes in the cancer patients and their caregivers. Method: The stress method was measured by V AS(Visual Analogue Scale). The coping methodes was measured using the modified Ways of Coping Questionnaire. The phases of patient illness consisted of Ist(initial) stage, and 2nd(recurred) stage and 3rd(terminal) stage based on Lewandowski & Jones(1988) method. The data were collected by a survey of convenience sampling of 257 cancer patients and 196 of their caregivers from two hospitals in Seoul. The data were analyzed using paired t-test, unpaired t-test. Result: The stress level of cancer patients was lower than their caregivers. The cancer patients used emotion-focused coping mode than problem-focused coping mode. The caregivers problem-focused coping mode over emotion-focused coping mode. In the problem-focused coping mode, the caregivers significantly used two coping strategies that were ‘positve cope’, ‘information seeking’ more than patients. In emotion-focused coping mode, the caregivers significantly used one coping strategies that was ‘wish’ more than patients. The patients tended to used two coping strategies that were ‘blame’ and ‘emotion expression’ more than the caregivers. Conclusion: Further study needs to be done to positively identify these coping methods and develop interventions to assist patients and their caregivers.

• 대한전자공학회논문지SP
• /
• 제38권5호
• /
• pp.486-497
• /
• 2001

본 논문에서는 프로그램 가능한 하드웨어 장치에서 영상 처리를 효율적으로 수행하기 위한 새로운 메모리 어드레스 지정 방법(addressing mode)을 제안한다. 기존의 어드레스 지정 방법은 음성과 같은 일차원적인 형태의 데이터 처리에 적합한 반면, 제안된 메모리 어드레스 지정 기법은 영상 데이터의 이차원적인 특성을 고려한 새로운 메모리 어드레스 지정 기법이다. 제시된 기법은 기존의 메모리 구조를 바꾸지 않으면서도 이차원 데이터의 위치를 표시할 수 있는 두개의 오퍼랜드를 입력으로 메모리에 저장된 영상데이터 값을 처리는 명령어이다. 이차원적인 특성을 지니는 새로운 메모리 어드레스 지정 기법은 다음과 같은 장점을 지닌다. 먼저, 기존 하드웨어에서 여러 명령어에 걸쳐 수행해야 할 작업을 통합함으로써, 수행해야 할 프로그램의 코드 사이즈를 줄여 하드웨어의 성능을 높임과 동시에 근래 무선 응용 분야에서 요구되는 저전력 동작을 가능하게 한다. 아울러, 영상 데이터가 가지는 이차원적인 특성을 그대로 반영하므로, 사용자가 보다 쉽게 어셈블러를 통해 어플리케이션을 프로그램 할 수 있다. 이와 같은 이차원적인 메모리 어드레스 지정 기법은 각종 DSP, media processor, 그래픽 장치 등에 이용될 수 있다. 본 논문에서는 이러한 이차원 메모리 어드레스 지정 기법의 개념을 제안함과 동시에, 이를 효율적으로 구현하기 위한 하드웨어 구조를 제시한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.52.3-52
• /
• 2002

Natural frequencies and mode shapes are two important modal data which specify the system. If the real system and FE model don't have the same local physical parameters, there will be a difference between modal data from real system and FE model. Because there is little difference in displacement mode shapes measured by an accelerometer, displacement modal update based on mode shapes including measurement errors may not be successful. In this research, strain mode shapes are used as modal data because the strain mode shapes measured by strain gauges are more sensitive than the displacement mode shapes with respect to the change of the parameters concerned in FE stiffness matrix...

• 산업기술연구
• /
• 제32권A호
• /
• pp.3-8
• /
• 2012

In IEEE 802.16j standard document, two modes about usage of RS are proposed; one is transparent mode to enhance data throughput and the other is non-transparent mode to extend coverage. In this paper, we focus on non-transparent mode and find that the mode also affects data throughput. We analyze data throughput on various RS topology and their extended coverage area in non-transparent mode. From the analysis, we see that higher throughput can be obtained when MR-BS and RS are located distantly.