• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.504-507
• /
• 2011

The inertial migration of a two-dimensional elastic capsule in a channel flow was studied over the Reynolds number range $1{\leq}Re{\leq}100$. The lateral migration velocity, slip velocity, and the deformation and inclination angle of the capsule were investigated by varying the lateral position, Reynolds number, capsule-to-channel size ratio(${\lambda}$), membrane stretching coefficient(${\Phi}$), and membrane bending coefficient(${\gamma}$). During the initial transient motion, the lateral migration velocity increased with increasing Re and ${\lambda}$ but decreased with increases in ${\Phi}$, ${\gamma}$ and the lateral distance from the wall. The initial behavior of the capsule was influenced by variation in the initial lateral position ($y_0$), but the equilibrium position of the capsule was not affected by such variation. The balance between the wall effect and the shear gradient effect determined the equilibrium position. As Re increased, the equilibrium position initially shifted closer to the wall and then moved towards the channel center. A peak in the equilibrium position was observed near Re=30 for ${\gamma}=0.1$, and the peak shifted to higher Re as ${\gamma}$ increased. Depending on the lateral migration velocity, the equilibrium position moved toward the centerline for larger ${\gamma}$ but moved toward the wall for larger ${\Phi}$ and ${\gamma}$.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.3067-3072
• /
• 2008

A two-dimensional model for anode-supported IT-SOFCs is proposed in order to accurately consider the heat and mass transport processes with a fully-developed axial velocity profile in channel flow. A comprehensive micro model is employed to describe the electrochemical reaction in anode and cathode of SOFCs. This paper investigates the effects of operational parameters (inlet temperature, the amount of flow rate, and air flow rate) including flow configurations (co-flow and counter-flow) on the current density and temperature distributions in the IT-SOFCs.

• 한국전산유체공학회지
• /
• 제4권3호
• /
• pp.28-34
• /
• 1999

The objective of this study is to present a numerical treatment of the pressure gradient when control volumes are sharing the interface between a homogeneous fluid and a porous medium. Two possible approaches, e.g. linear interpolation and extrapolation, are considered, and they are applied to the case of a steady and two-dimensional curved channel flow which is partially filled with a porous medium. It was found that the linear extrapolation produces a continuous velocity-field at the interface and thus is recommended. On the contrary, the linear interpolation entails a discontinuous velocity field at the interface, thereby warning its use in connection with the Brinkman-Forchheimer-extended Darcy flow model.

• 한국방재안전학회논문집
• /
• 제12권2호
• /
• pp.35-45
• /
• 2019

인위적인 하도의 확대 및 축소는 유수의 흐름을 변화시킬 뿐만 아니라 침퇴적 양상에 변화를 가져와 홍수의 원활한 소통에 지장을 초래할 수 있다. 이에 본 연구는 하도의 급확대가 하상의 변화와 하천 흐름의 변화에 미치는 영향을 분석하는데 목적이 있다. 이를 위하여 고향의 강 조성사업으로 하도의 일부 구간이 2~3배 이상 확폭 된 지방하천인 경포천을 대상으로 RMA-2 및 SED-2D모형을 이용하여 하도의 확폭으로 인한 흐름특성의 변화와 하상변동을 모의하였다. 연구결과, 경포천 하도의 확폭은 확폭 전에 비해 치수적 안정성을 확보하고 있는 것으로 나타났으나, 연구대상 구간의 침수빈도는 연중 1회 이상으로 향후 유지관리에 많은 비용과 시간이 필요할 것으로 분석되었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권4호
• /
• pp.511-519
• /
• 2003

A stratified flow is simulated using the finite difference lattice Boltzmann method (FDLBM). The effect of body force (gravity) in a simple one-dimensional model with the lattice BGK 9 velocity is examined. The effect of body force in the compressible fluid is greatly different from that of the incompressible fluid In a compressible fluid under gravitational force, the density stratification is not sufficient and the entropy stratification is essential. The numerical simulation of a line sink compressible stratified flow in two-dimensional channel is also carried out. The results show that selective withdrawal is established when the entropy of the upper part increases. and the simulated results using FDLB method are satisfactory compared with the theoretical one.

• 대한전자공학회논문지
• /
• 제26권11호
• /
• pp.1644-1651
• /
• 1989

In this paper, a two-dimensional numerical analysis of HEMT's with gate length of 0.6um is performed. In this case, Control Volume Formulation method which has been used in the analysis of heat transfer and fluid flow is used as a numerical method. As a mobility model, empirical formula including the velocithy overshoot phenomena is used instead of two-piece mobility model. The results obtained from this numerical analysis(i.e., the region in which cahnnel is formed, the strength of electric field in the channel, the distribution of potential, and the distribution of electron concentration etc.)are in good agreement with the previous analytic results. And our results also show the parasitic MESFET's operation in the range of the high gate voltage.

• 한국해양공학회지
• /
• 제4권1호
• /
• pp.55-61
• /
• 1990

For the tracking of three dimensional free surface motions, a method referred to as the Volume of Fluid(VOF) algorithm is extended. In order to calculate the slope of three dimensional free surface which is the most important for the advection algorithm that decides the amount of fluid from cell to cell and for the application of free surface boundary condition, a simple method utilizing two dimensional slope informations is introduced. The extended algroithm is tested by demonstrating the simulation of a propagating sinusoidal wave through the channel whose width changes abruptly.

• 동력기계공학회지
• /
• 제18권6호
• /
• pp.207-214
• /
• 2014

Mass and flow resistance in a square ribbed microchannel have been studied numerically using the Lattice Boltzmann Method. It has been build up on two dimensional nine velocity vectors model with single relaxation time method called the Lattice Bhatnagor-Gross-Krook model. To analyze the roughness effect on the flow resistance namely the friction factor and mass flow has been discussed at the slip flow regime, $0.01{\leq}Kn{\leq}0.10$, where Kn is the Knudsen number. The wall roughness is considered by square microelements with a relative roughness height up to maximum 10% of channel height. The velocity profiles in terms of streamlines near the riblets are demonstrated to be responsible for the roughness effect. It is found that the roughness effect leads to increase the flow resistance with roughness height but it is decreased significantly with increasing the space between two roughness elements as well as the Knudsen number. In addition, the mass flow decreased linearly with increasing both roughness height and gap but significantly changed at the slip flow regime.

• 대한기계학회논문집B
• /
• 제23권11호
• /
• pp.1418-1425
• /
• 1999

Flow over a protruding surface is investigated using numerical simulation. We consider flow between two parallel plates with a cube mounted on one side of the channel. As the flow approaches the cube, the adverse pressure gradient produces three-dimensional boundary-layer separation, resulting In the formation of horseshoe vortices. The objective of our study is to clarify both the steady and the unsteady characteristics of the vortex system. As the Reynolds number increases, the structure of the vortices near the cube becomes complex and the number of vortices increases. The distribution of skin friction on the cube-mounted wall reflects the effect of the horseshoe vortices. All these results are consistent with the experimental findings currently available.

• 한국수자원학회논문집
• /
• 제48권11호
• /
• pp.891-903
• /
• 2015

본 연구는 식재된 개수로에서 흐름특성을 모의할 수 있는 수심 적분된 2차원 수치모형을 이용하여 원형 식생역 주변의 흐름을 수치모의하였다. 식생영향을 고려하기 위해 식생항력 항을 지배방정식에 추가하였고 다양한 식생체적비율(SVF) 조건에 따른 수치모의를 수행하였다. 흐름이 원형 식생역을 통과하고 하류에 저유속 구간인 후류영역(wake region)을 형성하며 식생체적비율이 0.08 이상이면 재순환 영역이 발생하였다. 재순환 발생위치는 식생체적비율이 감소하면 식생역에서 더욱 하류로 이동하였다. 후류영역을 지나 원형 식생역 양 측면에서 유발된 전단층들의 상호작용에 의해 von $K{\acute{a}}rm{\acute{a}}n$ 와열이 발생하였다. 원형 식생역 하류에서 발생하는 와류는 식생체적비율이 0.08 이상이 되면 나타나기 시작하였고 발생위치는 난류운동에너지가 최대값을 보이는 위치와 일치하였다. 최대 난류운동에너지는 식생체적비율이 감소하면 줄어드는 것으로 나타났고 최대값의 발생위치는 점점 하류로 이동하였다.