• 한국해양공학회지
• /
• 제37권3호
• /
• pp.122-128
• /
• 2023

Autonomous berthing is a crucial technology for autonomous ships, requiring optimal trajectory planning to prevent collisions and minimize time and control efforts. This paper presents a two-phase, two-point boundary value problem (TPBVP) strategy for creating an optimal berthing trajectory for a twin-propeller, twin-rudder ship with autonomous berthing capabilities. The process is divided into two phases: the approach and the terminal. Tunnel thruster use is limited during the approach but fully employed during the terminal phase. This strategy permits concurrent optimization of the total trajectory duration, individual phase trajectories, and phase transition time. The efficacy of the proposed method is validated through two simulations. The first explores a scenario with phase transition, and the second generates a trajectory relying solely on the approach phase. The results affirm our algorithm's effectiveness in deciding transition necessity, identifying optimal transition timing, and optimizing the trajectory accordingly. The proposed two-phase TPBVP approach holds significant implications for advancements in autonomous ship navigation, enhancing safety and efficiency in berthing operations.

• 한국항해학회지
• /
• 제21권1호
• /
• pp.103-108
• /
• 1997

Mathematical model of maneuvering motion for a single-screw single-rudder ship is established and several applications to the special situations of maneuvering are attempted. While, the mathematical model for twin-screw twin-rudder ship is not presented so much, because that type of ship is not popular. Lee et al. have examined the characteristics of such ship by captive model tests in 1988, in Japan. This paper proposes new mathematical models for propeller effective wake (1 -${\omega}_p$) and effective neutral rudder angle ${delta}_R$ in the case of twin-screw twin-rudder ship. And some maneuvering motionse are calculated with proposed models and compared with exact simulations.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1996년도 The Korean Institute of Navigation 1996년도 한·중 국제학술 심포지움 및 추계학술발표회 논문집
• /
• pp.81-88
• /
• 1996

Mathematical model of maneuvering motion for a single-screw single-rudder ship is established and several applications to the special situations of maneuvering are attempted. While the mathematical model for twin-screw twin-rudder ship is not studied presented so much because that type of ship is not popular. Lee et al. have examined the characteristics of such ship by captive model tests in 1988 in Japan. This paper proposes new mathematical models for propeller effective wake (1-wp) and effective neutral rudder angle $\delta$R in the case of twin-screw twin-rudder ship. And some maneuvering motions are calculated with proposed models and compared with exact simulations.

• 대한조선학회논문집
• /
• 제33권4호
• /
• pp.60-65
• /
• 1996

1축 1타선에 대한 조종운동 수학모델은 통상적인 경우 이미 확립되어 널리 사용되고 있다. 또한 저속이나 천수역에서의 조종운동계산에도 응용되고, 새로운 국면의 조종운동 해석에도 기존의 조종수학 모델이 근간이 되고 있다. 한편 2축 2타선과 같은 특수선형에 대해서는 Lee 등에 의한 상세한 구속모형시험 결과로 그 특성이 알려지게 되었고, 1축 1타를 기본으로 하는 기존 수학모델에 약간의 수정을 가함으로서 충분이 조종운동을 추정할 수 있음을 보였다. 본 논문에서는 2축 2타선에 대한 Propeller Effective Wake($1-w_p$)와 유효중립타각 (Effective Neutral Rudder Angle) ${\delta}_R$에 대한 추정모델을 제안하고, Hull의 유체력에 관해서도 Inoue의 추정식을 사용하여, 초기설계단계에서 선박의 주요치수, Propeller 및 타 제원만으로서 개략적인 2축 2타선의 조종운동 계산을 가능하도록 하였다. 이 추정법에 의한 조종운동 계산결과를 엄밀한 구속모형 시험 Data에 의한 계산과 비교하여, 본 논문에서 제안된 추정법의 유용성을 검증하였다.

• 해양환경안전학회지
• /
• 제7권3호
• /
• pp.1-16
• /
• 2001

선박의 항행안전의 문제가 중요시됨에 따라 선박조종시뮬레이터를 이용한 운항훈련, 안전성 검토 등이 필요성이 중요하게 인식되고 있다. 또한 추진성능을 향상시킬 목적으로 다양한 선종이 출현되고 있고, 이에 따라 선박조종시뮬레이터의 개발에 있어서 선박의 데이터베이스는 필수적이라고 할 수 있다. 따라서 선종에 따른 수학모델을 각각 선박조종시뮬레이터에 적용시킴으로써 다양한 조종 시뮬레이션을 가능하게 할 수 있다. 본 논문에서는 우수한 추진성능을 목적으로 한 2축2타선박을 대상으로 조종운동 수학모델을 정식화하였다. 구체적으로 항만내에서의 저속시 조종운동을 구현할 수 있는 수학모델에 대해서 검토하였으며, 선체·프로펠러·타의 상호간섭에 대해서도 고려하였다. 또한, 수치시뮬레이션을 수행함으로써 2축2타선박의 기본적인 조종성능을 확인하였다.

• Journal of Ship and Ocean Technology
• /
• 제10권4호
• /
• pp.12-23
• /
• 2006

In this paper, a numerical study is carried out to investigate the turbulent flow around a twin-skeg container ship model with rudders including propeller effects. A commercial CFD code, FLUENT is used with body forces distributed on the propeller disk to simulate the ship stem and wake flows with the propeller in operation. A multi-block, matching, structured grid system has been generated for the container ship hull with twin-skegs in consideration of rudders and body-force propeller disks. The RANS equations for incompressible fluid flows are solved numerically by using a finite volume method. For the turbulence closure, a Reynolds stress model is used in conjunction with a wall function. Computations are carried out for the bare hull as well as the hull with appendages of a twin-skeg container ship model. For the bare hull, the computational results are compared with experimental data and show generally a good agreement. For the hull with appendages, the changes of the stem flow by the rudders and the propellers have been analyzed based on the computed result since there is no experimental data available for comparison. It is found the flow incoming to the rudders has an angle of attack due to the influence of the skegs and thereby the hull surface pressure and the limiting streamlines are changed slightly by the rudders. The axial velocity of the propeller disk is found to be accelerated overall by about 35% due to the propeller operation with the rudders. The area and the magnitude of low pressure on the hull surface enlarge with the flow acceleration caused by the propeller. The propellers are found to have an effect on up to the position where the skeg begins. The propeller slipstream is disturbed strongly by the rudders and the flow is accelerated further and the transverse velocity vectors are weakened due to the flow rectifying effect of the rudder.

• 대한조선학회논문집
• /
• 제54권3호
• /
• pp.204-214
• /
• 2017

Recently, ship owners have been requiring the assessment of the maneuverability of a twin-screw ship under machinery failures. In this paper, we are only focused on the propulsion failure among propulsion failure, power supply failure, steering system failure etc. First of all, the mathematical model for the twin-screw 174K LNGC is verified by comparing the simulated results for $35^{\circ}$ turning test, $10^{\circ}/10^{\circ}$ zigzag test and $20^{\circ}/20^{\circ}$ zigzag test under normal operating condition and those obtained from free running model tests. And, sea trial results of 216K LNGC under single propeller failure are compared with those of 174K LNGC under identical condition to verify the proposed method to predict maneuverability under single propeller failure. After the straight line maneuver is simulated under the single propeller failure, the speed and equilibrated heading and rudder deflection angles at steady state are predicted. After the IMO maneuvering tests are simulated under the single propeller failure, the results are reviewed to investigate the maneuvering characteristics due to the failure.

• 대한조선학회논문집
• /
• 제51권2호
• /
• pp.154-161
• /
• 2014

Naval ships have hull appendages which are more exposed to the outside because of its small block coefficient compared with commercial ships. These exposed hull appendages like skeg, strut and shaft line affect the maneuverability of a ship. The effect of hull appendages has considered at initial design stage to estimate more accurate maneuverability. In this paper, sensitivity analysis is used to analyze the effect on maneuverability by hull appendages. 3 DOF maneuvering equations based on Mathematical Modelling Group (MMG) model are used and propeller & rudder model are modified to reflect the characteristics of twin propeller & twin rudder. Numerical maneuvering simulations (Turning test, Zig-zag test) for benchmark naval vessel, David Taylor Model Basin (DTMB) 5415 are performed. In every simulation, it is calculated that stability indices and maneuverability characteristics (Tactical Dia., Advance, 1st Overshoot, Time of complete cycle) with respect to the parameters (area times lift coefficient slope, attachment location) of hull appendages. As a result, two regression formulas are established. One is the relation of maneuverability characteristics and stability indices and the other is the relation of stability indices and hull appendages.

• 로봇학회논문지
• /
• 제11권4호
• /
• pp.217-225
• /
• 2016

Dynamic Positioning (DP) is used to automatically maintain the position and heading of a floating structure subjected to environmental disturbances. A DP control system is composed of a motion controller to compute the desired force and moment and a thrust allocator to distribute the computed force and moment to multiple thrusters considering mechanical and operational constraints. Among various thruster configurations, azimuth thrusters or propeller/rudder pairs tend to make the allocation problem difficult to solve, because these types of propulsion systems include nonlinear constraints. In this paper, a dynamic positioning strategy for a twin-thruster ship that is propelled by two azimuthing thrusters is addressed, and a thrust allocation method which does not require a numerical optimization solver is proposed. The applicability of the proposed method is demonstrated with an experiment using an autonomous boat.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2001년도 춘계학술발표대회
• /
• pp.53-77
• /
• 2001

선박의 항행안전의 문제가 중요시됨에 따라 선박조종시뮬레이터에 의한 안전성 검토의 필요성이 크게 인식되고 있다. 또한 조종성능을 향상시킬 목적으로 다양한 선종이 출현하고 있고, 이에 따라 선박조종시뮬레이터의 개발에 있어서 선박의 데이터베이스는 필수적이라고 할 수 있다. 따라서 선종에 따른 수학모델을 각각 선박조종시뮬레이터에 적용시킴으로써 다양성이라는 가상현실의 잇점을 한층 부각시킬 수 있다. 본 연구에서는 우수한 추진성능을 목적으로 한 2축2타선박을 대상으로 조종운동 수학모델을 정식화하였다. 구체적으로 항만내에서의 저속시 조종운동을 구현할 수 있는 수학모델에 대해서 검토하였으며, 선체·프로펠러·타의 상호간섭에 대해서도 고려하였다. 또한, 수치시뮬레이션을 수행함으로써 2축2타선박의 기본적인 조종성능을 확인할 수 있었다.