• 전자공학회논문지
• /
• 제53권5호
• /
• pp.37-46
• /
• 2016

본 논문에서는 고가의 위상천이기를 대체하여 로트만 렌즈 안테나를 이용한 2.442GHz 대역의 빔 조향 시스템을 제안한다. 본 빔 조향 시스템의 구성요소는 로트만 렌즈, 송신 안테나, 빔을 스위칭하기 위한 스위치 박스로 구성되어 있다. 초기 설계조건을 설정하고 요구조건에 맞춰 설계 및 제작하였다. 그 결과, 고가의 위상천이기를 대체한 로트만 렌즈의 사용으로 무반사실에서 빔이 조향됨을 알 수 있었다. 성능 검증을 통해 실시간 빔 수신 표시 장치인 정류안테나의 LED를 켬으로써 시각적으로 빔의 조향을 확인하였다.

• 교육시설 논문지
• /
• 제22권4호
• /
• pp.15-25
• /
• 2015

The Olin Library in St. Louis was an important design competition for the United States in the 1950's, the rear of America's modern architecture. The participants of this competition were a variety of representative architects and groups of its time. With the library's functional rationality, the Olin Library competition was legible of the aspects of modern architectural flow. The competition required two demands. The first demand was absolute importance in character definition of place, which was to satisfy the site conditions approached from campus design. Secondly was related to interpretation of morphological symbolism in an architectural matter. The experiments of American modern architecture started to change its ideal goal gradually ; accommodating the altering public's code, at the same time, maintaining the original modern value was the reason to changing the ideal goal. As a turning point, the Olin Library should be understood as an important work, which divulged the value change of architectural interpretation.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.466-477
• /
• 2021

There are three different well-known methods for predicting the manoeuvrability of ships: (1) free running model test, (2) direct manoeuvring simulation using CFD and (3) system-based manoeuvring simulation. In this paper, the manoeuvrability of the KVLCC2 was estimated using CFD with rigid body motion and body force propeller method. The free running manoeuvre at the different time steps were also simulated. The yaw checking ability and the turning ability of KVLCC2 were predicted using CFD and could have been confirmed that the IMO criteria was satisfied. When the results were compared with the model test and system-based method, the free running simulation showed better agreement to that of the model test. It could also be confirmed that the results vary depending on the time step. Overall, the CFD results using the body force propeller method estimated most accurately the test results.

• 수산해양기술연구
• /
• 제19권1호
• /
• pp.12-16
• /
• 1983

색광에 대한 두툽상어 Scyliorhinus torazame의 행동을 조사하기 위하여, 2가지 서로 다른 색광을 조합하여 수조의 양단에서 동시에 광자극을 가했을 때의 반응을 조사한 결과는 다음과 같다. 1. 수조내에서의 구간별 분포곡선은 대체로 W자형이 되었다. 2. 양색광원쪽에서의 평균분포차는 10.19%(0.17~25.75%)였고, 주간(6.72%)보다 야간(13.66%)에 더 컸다. 3. 두툽상어가 잘 모이는 색광은 주간에는 황색, 백색, 청색, 적색의 순이며, 야간에는 적색, 청색, 백색, 황색의 순으로 나타났다. 4. 조명시간의 경과에 따른 집어율의 변화는 적었으며 비교적 안정하게 변동했는데 주간에 더 안정되었다. 5. 두 가지 색광에 대한 집어율의 차는 조명시간에 관계없이 대체로 뚜렷했는데 주간보다 야간에 더 차가 심했다

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.317-322
• /
• 2004

This paper deals with a prediction method of tool life in view of the reliability assessment. In this study, the flank wear was studied among multi-factors deciding the tool wear state. Firstly, tool lift was predicted by correlation between flank wear and cutting time, based on the extended Taylor tool life equation of turning data, including parameters of cutting speed, feed rate, and cutting depth. Secondly, each of cutting conditions of endmilling was equivalently converted to apply ball endmill data to the extended Taylor equation. The web-based reliability prediction program for tool lift is being developed as one of reliability assessment programs to for the machine tools.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2001년도 추계학술대회 학술발표 논문집
• /
• pp.69-73
• /
• 2001

The dynamic characteristics of turning processes are complex, non-linear and time-varying. Consequently, the conventional techniques based on crisp mathematical model may not guarantee surface roughness regulation. This paper presents a fuzzy controller which can regulate surface roughness in milling process using end-mill under varying cutting condition. The fuzzy control rules are established from operator experience and expert knowledge about the process dynamics. regulation which increases productivity and tool life is achieved by adjusting feed-rate according to the variation of cutting conditions. The performance of the proposed controller is evaluated by cutting experiments in the converted CNC milling machine. The result of experiments show that the proposed fuzzy controller has a good surface roughness regulation capability in spite of the variation of cutting conditions.

• 한국공작기계학회논문집
• /
• 제14권3호
• /
• pp.1-7
• /
• 2005

The prediction for tool life is one of the most important factors for increasing reliability, stability, and productivity of manufacturing system. This paper deals with a tool life prediction method in view of reliability assessment for cutting tools. In this study, flank wear was focused among multi-factors deciding the tool wear state. First, tool life was predicted by correlation between flank wear and cutting time, based on the extended Taylor tool life equation of turning, including parameters of cutting speed, feed rate, and cutting depth. Second, each of cutting conditions of end-milling was equivalently converted to apply ball end-mill data to the extended Taylor equation. The web-based prediction program for tool life was developed as one of reliability assessment programs for machine tools.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 춘계학술대회 논문집
• /
• pp.200-202
• /
• 2007

In recent years, equipment and network standards have been increasing in both number and complexity. Two standards that will soon be introduced to KOREA are the HV standards for assessing distorting and fluctuating loads, IEC 61000-3-6. Utility engineers, being under increasing time constraints, are turning more and more to software to quickly solve problems. This paper describes the methodology used to implement the above standards in Microsoft Excel in order to assist utility engineers to readily apply these standards in practical situations.

• 농업과학연구
• /
• 제37권1호
• /
• pp.113-121
• /
• 2010

Land consolidation ratio for rice paddy fields reached to 64.7% as of 2008 in Korea, and this also accelerated automation of field machinery. Especially, research on autonomous tractors has been continuously conducted. Tillage is one of the labor-, energy-, and time-consuming field operations. Most important requirements for autonomous tractors would be travelling path planning and electronic system to control the tractor to follow the path. The instruction of computer was required to conduct the tillage operation in field with unmanned traveling tractor. This instruction was coincidently used in the control of the traveling path and the motion of tractor. The objectives of the study were 1) to characterize and model tillage operating sequence, turning pattern, and 2) to develop tillage path formation programs for autonomous tractor and evaluate the performance.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2000년도 춘계종합학술대회
• /
• pp.124-127
• /
• 2000

This paper describes the algorithm for more fast tracking by compensation of the staring angle of antenna to receive the satellite signal changed by the mobile vehicle direction. The staring angle is compensated by signal processing from the electronic compass which is called VECTOR2X, and a left-right tracking method. Especially, when mobile vehicle is turning with high speed, it is observed a result which has more fast tracking time by using angle tracking technique compensated by electronic compass than one by only left right tracking method.