• Journal of Ocean Engineering and Technology
• /
• v.15 no.1
• /
• pp.57-66
• /
• 2001

In order to measure steel corrosion in mortar by a transient electro-magnetic (TEM) Method, the development of the sensors have been studied. The sensors were made of enamelled wire with diameter of 0.25mm and Acril. The sensor configuration was used as a coincident loop type. The secondary electro motive force(EMF) was measured with SIROTEM III. The accelerator was equipped with the SIROTEM III. The accelerator permits the transmitter to turn off approximately 10~15 times faster than normal. The high resolution time series used for very shallow or high resistivity investigation was selected. The steels were embedded in mortar which were made from sand : cement : water ratio of 2 : 1: 0.5. The mortar specimen was 50cm long, 20cm wide and 10cm thick. To investigate steel corrosion in mortar, the sensors used were with 2$\times$2$cm^2$(3, 6, 9$\Omega$), 3$\times$3$cm^2$(3, 6, 9$\Omega$) and 6$\times$6$cm^2$(3, 6, 9$\Omega$). The obtained result obtained showed that the sensor 8(6$\times$6$cm^2$, 6$\Omega$) was the proper sensor for the measurement of steel corrosion in mortar.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.520-524
• /
• 2001

Recently, the demand of large capacity SMPS for industrial area is increasing. Full-bridge dc-dc converter with IGBT is most widely used for large capacity SMPS because IGBT has a low-conduction loss and large current capacity, But most large capacity Full-bridge do-dc converter using IGBT has low operating frequency because of switching loss at IGBT especially at turn-off by current tail and it's cause of relatively big converter size. MOSFET has low switching losses has been widely used for high frequency SMPS but it has a problem to apply to large capacity SMPS because it has large conduction resistance causing large on-time losses. In this paper, for reduction losses at switching device, MOSFET is applied at parallel with IGBT in full-bridge dc/dc converter.

• English & American cultural studies
• /
• v.14 no.2
• /
• pp.77-96
• /
• 2014

As the cyberspace several decades ago created a cyber fiction fever, the augmented reality as the future of imagination can generate another kind of literary genre and new social ambiance where books tend to come to life more realistically. This newly created "smart fiction," "smart movies," and "smart environment" will be full of fun, hopes and conveniences. But addiction to smart kinds will create unwanted dangerous plethora like ghost-like avatars, wild animals and Farid due to the limitations of human control over hi-technology. If so, the adventures we plan to take will turn fantasy into horror in no time. Instead of loving new scientific things blindly, the emphasis hereafter must be put rather on the potentially negative aftermaths of the new innovative technology. Some viewers after watching the film Avatar are still suffering from the syndrome called "avatar blues," a homesick for Pandora. After their experiencing of the experimental 3D effects in books and media, audience and readers are required to actively deal with the increased lack of the darker cave which the comparatively unsatisfactory present can never fill with fixity and limit. Like the prevention against the addictive online game or the manual of 3D television or 3D printer, the extreme off-limits and safety zone for this virtually and expendably subverting technology must be seriously reviewed by community before using and adopting it. Also, these technologically expanded and augmented environments must be prudently criticized by the in-depth study of literature just as cyber space begun by Gibson's cyber fiction and its criticism.

• English & American cultural studies
• /
• v.13 no.1
• /
• pp.1-28
• /
• 2013

Edward Abbey is regarded as one of the most influential ecological or nature writers. He celebrates the American Southwestern desert, argues for wilderness preservation, and advocates politically-oriented environmental activism to defend wilderness. He, however, does not classify himself as a nature writer, but rather places himself in the tradition of a kind of autography. His books show his fascination with the delicate harmony of the desert, and at the same time his personal journey over the desert. That is, eco-centered, he keeps his journey into the heart of the desert. He finds the desert harsh, brutal, fatal, and most of all, indifferent. The desert reveals simplicity and mystery, silence and revelation, and emptiness and fulfillment. This mythical and paradoxical essence of the desert draws him into the place and inspires redemptive humility and beauty, which, in turn, peel off his old ego or self. During his journey, Abbey tries to immerge himself with the desert yet remains intact and individual. The desert serves for him as the bedrock which sustains him and offers an opportunity to gain a new whole perspective. Like a pocket hunter in the desert whom he characterizes himself, he sticks to the desert to dig out ground for his existence and survival. Pulling the energy and force of the desert into his soul, Abbey is free, or compelled to contemplate what is beyond the human. His experience in and of the desert leads to a discovery of self and initiates selfhood.

• Journal of Radiation Protection and Research
• /
• v.48 no.3
• /
• pp.124-130
• /
• 2023

Background: When bipolar junction transistors (BJTs) are used as switches, their switching characteristics can be deteriorated because the recombination time of the minority carriers is long during turn-off transient. When BJTs operate as low frequency switches, the power dissipation in the on-state is large. However, when BJTs operate as high frequency switches, the power dissipation during switching transients increases rapidly. Materials and Methods: When silicon (Si) BJTs are irradiated by fast neutrons, defects occur in the Si bulk, shortening the lifetime of the minority carriers. Fast neutron irradiation mainly creates displacement damage in the Si bulk rather than a total ionization dose effect. Defects caused by fast neutron irradiation shorten the lifetime of minority carriers of BJTs. Furthermore, these defects change the switching characteristics of BJTs. Results and Discussion: In this study, experimental results on the switching characteristics of a pnp Si BJT before and after fast neutron irradiation are presented. The results show that the switching characteristics are improved by fast neutron irradiation, but power dissipation in the on-state is large when the fast neutrons are irradiated excessively. Conclusion: The switching characteristics of a pnp Si BJT were improved by fast neutron irradiation.

• The Journal of Fisheries Business Administration
• /
• v.35 no.2
• /
• pp.91-115
• /
• 2004

The main purpose of this study is to analyze the cooperative squid fisheries problems surrounding the $E128^{\circ}$, established by the 1965 Korea - Japan Fisheries Agreement which banned Korean large trawlers' fishing east to the $E128^{\circ}$ In fact, the moratorium was put on by Japans request. However, such issue did not occur until the filefish stock in the southern Korean sea, which was a major target fish species of the large trawl fisheries, The filefish stock collapsed completely around 1991 and at the same time most of bottom fish stocks in the East China Sea began to show a symptom of over - exploitation. Thus, the off - shore large trawlers learned to have a little opportunity of finding out alternative fish stocks as well as fishing grounds. Fortunately, at that time squid resource stock and consumption were on the increasing trend. The large trawl fisheries were able to economically exploit squid stock east to the $E128^{\circ}$ through cooperative fishing with squid angling light boats in the East and East - South Sea, even though such cooperative fishing activities violate the existing fishery laws apparently. Some important reasons that the large trawlers have continued the cooperative fishing seem to be because (ⅰ) squid resource stock has been on the increasing state over time, (ⅱ) the trawl fisheries have made a significant contribution to meeting domestic and export demands and stabilizing squid prices, and (ⅲ) they have kept domestic squid market from foreign competition. However, the new Korea - Japan fisheries agreement in 1998 provided a momentum of questioning the effectiveness of the $E128^{\circ}$ by the squid - related fisheries other than the squid angling. Serious conflicts between squid - related fisheries began to emerge and to be much intensified. Squid angling industries in the East opposed to large trawlers's efforts to formalize such illegal cooperative squid fishing activities. Their main argument was that such formalizing would definitely make the East coast squid prices lower and in turn their business performance would be worse off. The results of quantitative analysis suggest that the trawlers' massive landing may have a significant influence on lowering the east coast squid prices. Now, an important issue that the squid - related fisheries and the government are facing is to solve such complex squid fishing problems through a multi - participatory negotiation process, including price stabilization, total allowable catch level and its operation schemes, $E128^{\circ}$ rearrangement, and so on.

• Journal of Family Resource Management and Policy Review
• /
• v.16 no.2
• /
• pp.187-210
• /
• 2012

Pumasi and Cooperative Child Care Sharing have had positive results among participants and show possibilities of spreading out to the community in general. However, performance was not proved where it is clarified, and the experience of 23 local Healthy Family Support Centers have that ran the demonstration project were unable to be collected. It is the point of time when the initial backing up is important but the centers do not have the systematic support. Therefore, this research presents an effective management plan through qualitative research involving Pumasi participants and person in charge. The operation strategies by the stage of the project were as follows: First, in the beginning stage, the person in charge establishes the target and vision of the project. Second, when comprising the Pumasi team, it was necessary to consider their characteristics according to the team organization subjects. Third, it is necessary to extend the turn-off time and provide many programs so that the various populations can participate. Fourth, in the advertising step, word of mouth and individual contact needs to be utilized. Fifth, in a medium or small city or an urban-rural complex area, the person in charge should support the participants' Pumasi activities. Sixth, various programs such as a passive and active parent education program and Pumasi education program for the leader needs to be provided for the activation of Pumasi activities. Lastly, a cooperative child care sharing location needs to be constructed by the duality system of the base space and outer space. In this location, the inside play space for the children is essential.

• Journal of Broadcast Engineering
• /
• v.22 no.6
• /
• pp.774-784
• /
• 2017

Occupancy sensors installed in buildings and households turn off the light if the space is vacant. Currently PIR (pyroelectric infra-red) motion sensors have been utilized. Recently, the researches using camera sensors have been carried out in order to overcome the demerit of PIR that can not detect static people. If the tradeoff of cost and performance is satisfied, the camera sensors are expected to replace the current PIRs. In this paper, we propose vision sensor-based occupancy detection being composed of tracking, recognition and detection. Our softeware is designed to meet the real-time processing. In experiments, 14.5fps is achieved at 15fps USB input. Also, the detection accuracy reached 82.0%.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.2 s.69
• /
• pp.59-65
• /
• 2006

Steel, as a reinforcing mechanism in concrete, provides the tensile strength that is lacking in concrete, alone, and the high alkaline environment (pH 12.5) in concrete offers satisfactory protection against most corrosion of the steel. However, the corrosion of reinforcing steel in concrete can occur by chloride attack or carbonation, and it can cause a loss of integrity a section and concrete failure through cracking and spalling. In this study, a transient electro magnetic method (TEM) of a nondestructive technique is adapted to study the measuring method of steel corrosion in mortar. The sensor was made of an enameled wire, with a diameter of 0.25mm and anacril. He sensor configuration used was a coincident loop type. The secondary electro motive force (2nd EMF) was measured with SIROTEMIII, which equipped the accelerator. The accelerator allowsthe transmitter to turn off approximately $10\sim15$ times faster than normal. The high-resolution time series, used for very shallow or a high resistivity investigation was selected. After steels were corroded by the salt spray, during 4, 8, 15 and 25 days, they were embedded in mortar. The content results acquired in this study are as follows. The variation of the secondary electro motive force (2nd EMF) was shown by the change of steel surface with different corrosion time steel. It was confirmed that measurement of steel corrosion in mortar by a transient electro-magnetic method (TEM) can be possible.

• Journal of Power Electronics
• /
• v.14 no.3
• /
• pp.444-457
• /
• 2014

This paper presents the design and realization of a digital PV simulator with a Push-Pull Forward (PPF) circuit based on the principle of modular hardware and configurable software. A PPF circuit is chosen as the main circuit to restrain the magnetic biasing of the core for a DC-DC converter and to reduce the spike of the turn-off voltage across every switch. Control and I/O interface based on a personal computer (PC) and multifunction data acquisition card, can conveniently achieve the data acquisition and configuration of the control algorithm and interface due to the abundant software resources of computers. In addition, the control program developed in Matlab/Simulink can conveniently construct and adjust both the models and parameters. It can also run in real-time under the external mode of Simulink by loading the modules of the Real-Time Windows Target. The mathematic models of the Push-Pull Forward circuit and the digital PV simulator are established in this paper by the state-space averaging method. The pole-zero cancellation technique is employed and then its controller parameters are systematically designed based on the performance analysis of the root loci of the closed current loop with $k_i$ and $R_L$ as variables. A fuzzy PI controller based on the Takagi-Sugeno fuzzy model is applied to regulate the controller parameters self-adaptively according to the change of $R_L$ and the operating point of the PV simulator to match the controller parameters with $R_L$. The stationary and dynamic performances of the PV simulator are tested by experiments, and the experimental results show that the PV simulator has the merits of a wide effective working range, high steady-state accuracy and good dynamic performances.