• Advances in concrete construction
• /
• v.10 no.3
• /
• pp.257-269
• /
• 2020

The aim of this study is to investigate the flexural performance of hybrid fiber reinforced self-compacting concrete (HFRSCC) having different ratio of micro and macro steel fiber. A total of five mixtures are prepared. In all mixtures, the sum of the steel fiber content is 1% and also water/binder ratio is kept constant. The amount of high range water reducer admixture (HRWRA) is arranged to satisfy the workability criteria of self-compacting concrete. Four-point bending test is carried out to analyze the flexural performance of the mixtures at 28 and 56 curing days. From the obtained load-deflection curves, the load carrying capacity, deflection and toughness values are investigated according to ASTM C1609, ASTM C1018 and JSCE standards. The mixtures containing higher ratio of macro steel fiber exhibit numerous micro-cracks and, thus, deflection-hardening response is observed. The mixture containing 1% micro steel fiber shows worst performance in the view of all flexural parameters. An improvement is observed in the aspect of toughness and load carrying capacity as the macro steel fiber content increases. The test results based on the standards are also compared taking account of abovementioned standards.

• Structural Engineering and Mechanics
• /
• v.19 no.3
• /
• pp.337-346
• /
• 2005

The paper reports on a study of bond strength between reduced-water-content concrete and tensile reinforcement in spliced mode. Three different diameters (12, 16 and 22 mm) of tensile steel were spliced in the constant moment zone, where there were two bars of same size in tension. For each diameter of reinforcement, a total of nine beams ($1900{\times}270{\times}180mm$) were tested, of which three beams were with no axial force (positive bending) and the other six beams were with axial force (combined bending). The splice length was selected so that bars would fail in bond, splitting the concrete cover in the splice region, before reaching the yield point. It was found that there was a considerable size effect in the experimental results, i.e., as the diameter of the reinforcement reduced the bond strength and the deflection recorded at the midspan increased significantly, whilst the stiffness of the beams reduced. It was also found for all reinforcement sizes that higher bond strength and stiffness were obtained for beams tested in combined bending than that of the beams tested in positive bending only.

• Natural Product Sciences
• /
• v.27 no.4
• /
• pp.234-239
• /
• 2021

Masclura tricuspidata, also called as Cudrania tricuspidata, is one of the most common Moraceae family plants in East Asia. Its trivial name follows mulberry due to the similar morphology. Investigation of the bioactive constituents of M. tricuspidata leaves yielded a new xanthone derivative along with twenty known compounds through various chromatographic techniques. A new compound was defined as mascluraxanthone (3), a prenylated xanthone glucoside on the basis of 1D and 2D NMR and MS data. Twenty known compounds were identified as four xanthone derivatives (1-2 and 4-5), two flavans (6-7), six flavanol derivatives (8-13), a flavonone (14) and seven flavonol derivatives (15-21). Among the isolated compounds, flavanol and flavonoid derivatives with 3',4'-OH groups showed antioxidant and anti-tyrosinase activities. Conclusively, the leaves of M. tricuspidata are rich in aromatic compounds including xanthones and flavonoids. In addition, these constituents showed antioxidant and anti-tyrosinase potentials, which might be useful for oxidative stress related diseases.

• Safety and Health at Work
• /
• v.14 no.1
• /
• pp.131-134
• /
• 2023

The aim was to describe out-of-hospital cardiac arrest (OHCA) occurring in the workplace of a large emergency network, and compare the evolution of their management in the last 15 years. A retrospective study based on data from the Northern Alps Emergency Network compared characteristics of OHCA between cases in and out the workplace, and between cases occurring from January 2004 to December 2010 and from January 2011 to December 2017. Among the 15,320 OHCA cases included, 320 occurred in the workplace (2.1%). They were more often in younger men, and happened more frequently in an area with access to public defibrillation, had more often a shockable rhythm, had a cardiopulmonary resuscitation started by a bystander more frequently, and had a better outcome. Cardiopulmonary resuscitation started by a bystander was the only chain of survival link that improved for cases occurring after December 2010. Workplace OHCA seems to be managed more effectively than others; however, only a slight survival improvement was observed, suggesting that progress is still needed.

• Korean Journal of Pharmacognosy
• /
• v.54 no.2
• /
• pp.53-60
• /
• 2023

Athyrium acutipinnulum, called as Ulleungdo ladyfern (Seom-go-sa-ri), is a native plant of South Korea. A. acutipinnulum has been consumed as foods and also traditionally used for the treatment of epilepsy, gonorrhea and nerve disorder. The methanolic extract and EtOAc soluble fraction of A. acutipinnulum showed the antioxidant activity. Fractionation using various chromatographic techniques resulted in the isolation of 13 compounds. The structures were elucidated on the basis of spectroscopic methods as seven phenolic compounds, methyl 2-hydroxy-3-phenylpropanoate (1), protocatechualdehyde (2), caffeic acid (3), trans-p-coumaric acid (4), (-)-4-E-caffeoyl-L-threonic acid (5), 5-O-caffeoyl shikimic acid (6) and 5-O-caffeoyl quinic acid (7), three flavonoids, quercetin 3-O-β-glucoside (8), naringenin-7-O-β-glucoside (9) and sutchenoside A (10), two steroids, ponasterone A (11) and ecdysone (12) and a coumarin, esculetin (13). Among them, compounds 5 and 10 were first reported from Athyrium spp and compounds 2, 5, 6 and 7 showed the antioxidant activity.

• Advances in concrete construction
• /
• v.16 no.1
• /
• pp.1-20
• /
• 2023

This study presents the experimental results performed to evaluate the effects of Polyvinyl-alcohol (PVA) and Polypropylene (PP) fibers on the fresh and residual mechanical properties of the hybrid fiber reinforced SCC before and after the exposure of 250℃, 500℃ and 750℃ temperatures. The compressive and splitting tensile strength, modulus of rupture (MOR), ultrasonic pulse velocity (UPV) as well as toughness and weight loss were investigated at different temperatures. PVA and PP fibers were added into SCC mixtures having only macro steel fiber and also having binary hybridization of both macro and micro steel fiber. The results showed that the use of micro steel fiber replaced by macro steel fiber improved the fresh and hardened properties compared to the use of only macro steel fiber. Moreover, it was emphasized that PVA or PP enhanced the residual flexural performance of SCC, generally, while it negatively influenced the workability, weight loss, UPV and the residual strengths with regards to the use of single steel fiber and binary steel fiber hybridization. Compared to the effect of synthetic fibers, PP had slightly more positive effect in the view of workability while PVA enhanced the residual mechanical properties more.

• The Korean Journal of Franchise Management
• /
• v.15 no.3
• /
• pp.17-25
• /
• 2024

Purpose: Color induces psychological responses in consumers, and the importance of color in marketing strategies is continuously emphasized. In particular, color can significantly influence consumers' purchasing decisions, even for food products. In this context, this study aims to examine the role of color naming in affecting consumers' product evaluations and purchase intentions for food products, with a focus on how the times of consumption acts as a moderating variable. Research design, data and methodology: This study designed the experiment using the Qualtrics program and recruited a total of 206 participants residing in the Eastern United States through the Amazon Mechanical Turk. Result: The experimental results showed that the ambiguity of color naming had different effects on consumer product evaluation and purchase intention depending on the times of consumption. Specifically, during the daytime, ambiguous color naming led to more positive evaluations and higher purchase intentions for the product, whereas these effects diminished during the nighttime. Conclusions: Considering the time of consumption in marketing strategies is essential for applying color naming effectively.

• Structural Engineering and Mechanics
• /
• v.92 no.2
• /
• pp.207-226
• /
• 2024

Recently, the phenomenon of disproportionate structural failure caused by blast load has grown more common in the field of engineering design. Blast-resistant analyses and designs have been developed by many structural techniques and methodologies to forecast the loads produced by a high explosive charge on structures with complicated geometry. These techniques are based on a good understanding of blast phenomena to analyze structures exposed to blast load. This paper provides a current state-of-the-art review of blast prediction and simulation methods to predict the design blast loads that are used to assess the structural response and damage level to an existing or new building. The damage criteria from the general design approach relevant to civil design applications in forecasting blast loads as well as structural system responses will be provided. Identifying the structures' expected damage class would aid in providing extra reinforcing or strengthening for damaged elements to meet the acceptance criteria or minimize damage by a suitable blast mitigation strategy. Based on identifying the damage class expected of a structure subjected to an explosion, blast mitigation strategies could be used to minimize damage and maximize the ability of the structure to function even after the explosion.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.1
• /
• pp.315-318
• /
• 2012

Objective: Cyclooxygenase-2 (COX-2) has been claimed to play role in carcinogenesis and be related to a bad prognosis in tumours. The aim of this study was to investigate the relationship between COX-2 expression and clinical and pathological parameters in early and advanced stage lung cancer patients. Materials and Methods: A total of 73 patients with lung cancer (27 adenocarcinomas, 33 squamous cell carcinomas, 4 large cell carcinomas and 9 small cell cancer) were analysed retrospectively. COX-2 expression was evaluated by immunohistochemistry in resection materials or lung biopsies. Tumor cells demonstrating more intense staining than smooth muscle and endothelial cells were recorded as COX-2 positive. We investigated the correlation between increased COX-2 expression and histological type of the tumor, the stage of the disease and survival. Results: COX-2 expression was observed in 55% of the adenocarcinomas, 45% of the squamous cell carcinomas and 22% of the small cell carcinomas. No correlation was apparent between COX-2 expression and disease stage, histological type and the survival. Conclusion: The results of this study do not support COX-2 expression as an independent prognostic factor in lung cancer. However, since results of the literature are different, further studies made in larger series are needed.

• Journal of Korean Neurosurgical Society
• /
• v.61 no.2
• /
• pp.277-281
• /
• 2018

Objective : Craniovertebral junctional anomalies constitute a technical challenge. Surgical opening of atlantoaxial joint region is a complex procedure especially in patients with nuchal deformity like basilar invagination. This region has actually very complicated anatomical and functional characteristics, including multiple joints providing extension, flexion, and wide rotation. In fact, it is also a bottleneck region where bones, neural structures, and blood vessels are located. Stabilization surgery regarding this region should consider the fact that the area exposes excessive and life-long stress due to complex movements and human posture. Therefore, all options should be considered for surgical stabilization, and they could be interchanged during the surgery, if required. Methods : A 53-year-old male patient applied to outpatients' clinic with complaints of head and neck pain persisting for a long time. Physical examination was normal except increased deep tendon reflexes. The patient was on long-term corticosteroid due to an allergic disease. Magnetic resonance imaging and computed tomography findings indicated basilar invagination and atlantoaxial dislocation.The patient underwent C0-C3-C4 (lateral mass) and additional C0-C2 (translaminar) stabilization surgery. Results : In routine practice, the sites where rods are bound to occipital plates were placed as paramedian. Instead, we inserted lateral mass screw to the sites where occipital screws were inserted on the occipital plate, thereby creating a site where extra rod could be bound.When C2 translaminar screw is inserted, screw caps remain on the median plane, which makes them difficult to bind to contralateral system. These bind directly to occipital plate without any connection from this region to the contralateral system.Advantages of this technique include easy insertion of C2 translaminar screws, presence of increased screw sizes, and exclusion of pullout forces onto the screw from neck movements. Another advantage of the technique is the median placement of the rod; i.e., thick part of the occipital bone is in alignment with axial loading. Conclusion : We believe that this technique, which could be easily performed as adjuvant to classical stabilization surgery with no need for special screw and rod, may improve distraction force in patients with low bone density.