• 대한기계학회논문집
• /
• 제19권8호
• /
• pp.1927-1939
• /
• 1995

An experimental investigation is conducted to find out the large scale coherent structures in the intermediate wake past a rotating cylinder with a single tripping wire attached. Relation between the vortex shedding frequency and the spin rate of rotating cylinder and the effects of the tripping wire on the flow characteristics were studied by using spectral analysis and conditional phase average technique, respectively. It is found that the vortex shedding frequency is bound to a certain range and varies regularly as spin rate increases. The coherent structures are compared with those of the plain rotating cylinder in the case of spin rate of 1.0. Distance between the upper and lower center of vortices increase and the vortex shedding time is delayed, the velocity fluctuation energy decreases near the center line of vortices and it spreads out to the outer region. The Reynolds shear stress increases highly in the upper region and the turbulent wake width expands with strong entrainment process.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권1호
• /
• pp.124-135
• /
• 2004

An experimental study is performed turbulent flow behind a square cylinder by using 2-D PIV technique. The Reynolds number investigated are 10.000. 30.000 and 50,000. The mean velocity vector, time mean axial velocity turbulence intensity. kinetic energy and Reynolds shear stress behind the cylinder are measured, The numerical method used this study is a CFD code, STAR-CD. The numerical results are compared with these of experimental.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 춘계 학술대회논문집
• /
• pp.83-86
• /
• 2007

Turbulent flow analysis is conducted around the multi-stage launch vehicle including base region and detachment motion of strap-on boosters due to resultant aerodynamic forces and gravity is simulated. Aerodynamic solution procedure is coupled with rigid body dynamics for the prediction of separation behavior. An overset mesh technique is adopted to achieve maximum efficiency in simulating relative motion of bodies and various turbulence models are implemented on the flow solver to predict the aerodynamic forces accurately. At first, some preliminary studies are conducted to show the importance of base flow for the exact prediction of detachment motion and to find the most suitable turbulence model for the simulation of launch vehicle configurations. And then, developed solver is applied to the simulation of KSR-III, a three-stage sounding rocket researched in Korea. From the analyses, after-body flow field strongly affects the separation motions of strap-on boosters. Negative pitching moment at initial stage is gradually recovered and a strap-on finally results in a safe separation, while fore-body analysis shows collision phenomena between core rocket and booster. And a slight variation of motion is observed from the comparison between inviscid and turbulent analyses. Change of separation trajectory based on viscous effects is just a few percent and therefore, inviscid analysis is sufficient for the simulation of separation motion if the study is focused only on the movement of strap-ons.

• 한국항공우주학회지
• /
• 제31권7호
• /
• pp.32-40
• /
• 2003

공탄성 플랩을 이용한 충격파와 난류 경계층의 간섭유동 제어에서 유동가시화에 관한 실험적 연구가 수행되었다. 유동 가시화를 위하여 순간 쉐도우 영상, 등유와 흑색안료 혼합물을 이용한 유맥선, 간섭 유동 후방에 적용된 실리콘 오일막의 간섭 줄무늬 형상 등이 얻어졌다. 플랩의 형상과 두께 변화에 의한 영향이 평가되었고 그 결과는 제어되지 않은 일반 평판 위의 충격파 간섭유동의 경우와 비교되었다. 충격파 간섭유동 후방에 적용된 얇은 오일막 표면에 나타나는 간섭무늬로서 이 영역에서의 정성적인 전단응력분포 관찰이 이루어 졌고, 그 결과 간섭유동 후방 중심축 근처에 길고 좁은 박리현상을 동반한 유동의 강한 폭 방향 변화가 관찰되었으며, 이는 이러한 충격파 간섭유동의 강한 3차원 특성을 보여주고 있다. 또한 플랩 하부에 위치한 공동부 형상이 충격파 간섭유동에 미치는 영향도 평가되었고, 그 영향을 무시할 수 없음이 관찰되었다.

• 대한기계학회논문집B
• /
• 제39권11호
• /
• pp.905-911
• /
• 2015

본 연구에서는 하부지지구조물 바닥판의 외곽영역에 위치한 구멍의 크기 변경(구멍 직경 감소)이 노심 입구 유량분포에 미치는 영향을 조사하기 위해 상용 전산유체역학 소프트웨어인 ANSYS CFX R.15를 사용하여 계산을 수행하였고, 기존 바닥판 구멍 형태에 대한 계산 결과와 비교하였다. 결론적으로 하부지지구조물 바닥판의 외곽영역에 위치한 구멍의 직경 감소를 통해 노심 입구에서 보다 균일한 유량 분포를 얻을 수 있었다. 따라서 원자력 규제측면에서 볼 때 본 연구에서 제시한 하부지지구조물 바닥판의 외곽영역 구멍 형태의 설계 변경은 연료집합체의 기계적 건전성 및 노심 열적여유도를 향상시킬 수 있다는 측면에서 바람직할 것으로 판단된다.

• 공업화학
• /
• 제16권5호
• /
• pp.698-704
• /
• 2005

구형교반조 및 원통교반조에서 paddle 임펠러의 교반소요동력을 넓은 범위의 레이놀즈수 영역에서 측정하였다. 구형교반조는 교반조 높이가 직경과 같고, 구형교반조의 체적과 같은 원통교반조의 겉보기 직경을 이용하여 구형교반조 및 원통교반조 모두에 적용할 수 있는 교반소요동력 상관식을 구했다. 이 상관식은 Nagata 등 및 Hixson 등의 실험결과에도 양호하게 상관되었다. 또한 임계레이놀즈수는 본 상관식에서 얻은 층류영역에서 난류영역으로의 전이에 관한 계수 $C_{tr}$에 잘 상관되었다.

• 대한기계학회논문집B
• /
• 제22권1호
• /
• pp.93-103
• /
• 1998

The paper reports the outcome of a numerical study of flow over idealized L-shaped ribleted surfaces with two-equation turbulence models. In the present study, the Launder and Sharma's k-.epsilon. turbulence model (LS model) is basically N employed, but with a little modification of the additional .epsilon.-source term without affecting its level under 2-dimensional straining in which the term has been calibrated. Compared to the original LS model, the present model has predicted greatly improved drag reduction behavior for this geometry. As a drag reduction mechanism, it is found that the skin-friction in the riblet valleys might be sufficient to overcome the skin-friction increase near the riblet tip. The present predicted results are in good agreement with the recent DN S ones by Choi et al. (1993): differences in the mean velocity prof ile and turbulence quantities are found to be limited to the riblet cavity region. It is also found that turbulent kinetic energy and Reynolds shear stress above the riblets are also reduced in drag-reducing configurations.

• 대한조선학회논문집
• /
• 제37권1호
• /
• pp.91-98
• /
• 2000

본 논문은 수면하에서 정속으로 움직이는 원형실린더에 의하여 생성되는 강제쇄파에 대한 실험적연구의 제2부이다. 강제쇄파의 역학적 메카니즘을 규명하는 차원에서 쇄파주위 유동의 점성유동 특성을 조사하였다. 이를 위하여 물체와 쇄파영역 후류에서의 속도와 전수두손실 분포를 계측하였으며 쇄파내부의 난류특성을 보기 위하여 열선유속계를 이용하여 난류강도를 계측하였다. 그 결과 쇄파부근과 그 후류에서 경계층유동과 유사한 유속결손과 수두손실분포를 확인하였으며 쇄파와 몰수체 간의 상호작용을 볼 수 있었다. 또한 계측된 난류응력값은 쇄파영역의 난류유동특성을 잘 보여주었다.

• 대한기계학회논문집
• /
• 제3권4호
• /
• pp.151-157
• /
• 1979

An experomental study on drg reduction in the rough tubes is presunted using the drrective drag reducing proymer solutions. The friction factors of the rough tubes follow the maximum drag reduction asymptote for the lower Reynolds numbers in the turbulent flow. However, as the Reynols number is increased the rougher tube results deviate from the maximum drag rduction asymptote sooner than the less rough tube results. There appears a systematic deviation from the maximum drag reduction asymptote depending on the relative roughness just as friction factors for the Newtonian hluid inthe rough tubes exhibit in the turbulent region. The minor loss results inthe various fittings such as elbows, tees, and gate valves are presunted The fittings show higher values of the loss coefficient in the drag reducing polymer solutions than in the Newtonian fluid, which is quite contrary to the drag reduction phenomenon in the straight tubes. The eqivalent length of the fittings for the drag reducing polymer solutions is many times longer than that for Newtonian fluids due to the increase of the loss coefficient and the decrease of the friction factor. It is speculated that the solid-like behavior of the polymer solutions in the abruptly changing folw passage plays a significant role in increasing the loss coefficient.

• 대한기계학회논문집B
• /
• 제25권5호
• /
• pp.611-618
• /
• 2001

The flow characteristics of a turbulent buoyant jet were experimentally investigated using a single-frame PIV system. The Reynolds number based on the nozzle exit velocity and nozzle diameter was about Re=5$\times$10$^3$. The instantaneous velocity fields in the streamwise plane passing the jet axis were measured in the near field X/D <11 with and without the temperature gradient. By ensemble averaging the instantaneous velocity fields, the spatial distributions of mean velocity, vorticity, and higher-order statistics up to third order were obtained. The temperature difference of 10$\^{C}$ does not affect a significant influence to the flow structure in the near field, but the total entrainment rate is increased slightly. The entrainment rate shows a linear variation with the streamwise distance in the region after X/D=5.0.