• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.1038-1043
• /
• 2002

The floating ring journal bearing is attraction for high-speed turbo machinery applications, including turbochargers and aircraft accessory equipment, because it is not only simple and easy to make and to replace in the field but also it seems to have adequate high speed stability characteristics. Therefore, an analysis method of dynamic properties of floating ring journal bearing is presented. The static equilibrium locus of inner film and outer film are calculated by using the impedance description. The equivalent stiffness and damping coefficients of floating ring journal bearing are composed by using the equilibrium of torque between inner film and outer film. Then, a stability analysis of turbocharger shaft system supported with floating ring journal bearing has been performed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 추계학술대회 논문집
• /
• pp.51-52
• /
• 2010

• 한국음향학회지
• /
• 제37권4호
• /
• pp.242-247
• /
• 2018

지속적으로 강화되는 배기가스 및 연비 규제에 대응하기 위해 자동차 업계에서는 다양한 노력을 하고 있다. 하지만 이로 인해 NVH(Noise, Vibration, and Harshness) 성능이 악화되는 경우들이 많이 발생하고 있다. 사례로 가솔린 엔진의 고압 펌프 소음 및 MPI(Multi-Point Injection)와 GDI(Gasoline Direct Injection)의 듀얼 분사로 인한 가속 천이 소음, 가솔린 터보차저 소음, 디젤 엔진에서의 분사변수 캘리브레이션으로 인해 악화되는 연소음에 대한 원인 및 개선방향을 제시하였다. 이러한 소음들은 고주파 소음으로 운전자에게 거친 청감을 유발하기 때문에 적절한 NVH 대책으로 저감시키는 노력이 반드시 필요하다.

• 한국소음진동공학회논문집
• /
• 제21권6호
• /
• pp.562-569
• /
• 2011

In this study linear and nonlinear dynamic stability characteristics of a medium-size high-speed turbocharger, whose rotor is supported by two 3-lobe journal bearings, are analyzed to evaluate and identify the effects of its bearing design variables. The rotor has the rated speed of 40,500 rpm and maximum continuous speed of 45,000 rpm. At first, utilizing the linear stability analysis method, bearing designs of yielding stable or unstable LogDecs as small as possible are searched by manipulating with machined bearing clearances and preloads. As next, utilizing the nonlinear analysis method, limit cycles of the rotor responses at the rated and maximum continuous speeds are simulated to check their acceptances. Results have shown that for the turbocharger rotor-bearing system considered, the 3-lobe journal bearing design with a smaller machined clearance and a larger preload are preferred for the stable rotor responses. More importantly, since there exists a good correlation between the linear and nonlinear stability analysis results, it is concluded that firstly the linear stability analysis method may be applied to screen quickly the ranges of bearing designs for stable or least unstable solutions and then, lastly the nonlinear stability analysis method may be deployed to check an absolute motion stability in terms of the limit cycle.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 춘계학술대회 논문집
• /
• pp.229-230
• /
• 2010

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.880-885
• /
• 2007

Diesel engines have been widely used in ships and power plants because of its higher thermal efficiency, mobility and durability compared to other prime movers. Though these merits, diesel engine including main components are sometimes vibrated due to higher combustion pressure in cylinders. Especially torsional, axial and structural vibrations in propulsion shafting may be severely manifested by the malfunction of torsional and axial dampers and misfiring and unbalanced load in cylinder. The structural vibration of main body and turbocharger core hole are also occurred by the loosen top bracing and excess wear-out or failure of turbocharger's bearings. The marine diesel engine should be safely designed from these vibrations. This paper introduces experimental methods to develop the prototype of integrated vibration monitoring system for marine diesel engine.

• 한국음향학회지
• /
• 제26권7호
• /
• pp.361-365
• /
• 2007

터보차저가 장착된 승용디젤엔진차량의 주요 소음원 중 하나로 터보차저 회전체의 기하학적 불균형에 기인한 공기 맥동음을 들 수 있다. 이 소음의 주요 발생부는 일반적으로 터보차저의 컴프레서휠로서 소음기와 같은 후처리 장치에 의해 저감될 수 있지만, 제조비용을 증가시키는 요인이 될 수 있다. 보다 효과적인 방법은 전반적인 기하학적 대칭성을 개선하거나 문제가 될 수 있는 단품을 분별해냄으로써 단품 품질을 관리하는 것이다. 제조상의 문제나 기타 여러 관점에서 볼 때, 단품에 대한품질관리가 보다 효과적이고 적합하다고 할 수 있다. 이를 위해서는, 생산 라인상에서 공기맥동음의 수준을 평가할 수 있는 적절한 판별방법이 필요하다. 본 논문에서는 공기맥동음의 수준을 정확히 측정할수 있는 방법을 소개하고 그 판별기준도 제시하고자 한다. 또한 리그 측정시스템의 신뢰성 평가과 함께, 리그측정결과와 차량측정결과 간의 상관관계도 분석하였다. 25개 샘플에 대한 측정 재현성 검증을 위해 게이지 R&R 기법을 활용하였다. 이와같은 측정 및 분석 결과로부터, 공기맥동음 관점에서 단품의 우열을 판별할수 있는 표준관리값을 제시할 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권3호
• /
• pp.381-387
• /
• 2003

Engine noise consists of the noise radiated from an engine structure and noises from engine ancillaries such as a turbocharger fuel injection system, and alternator. The noise of these ancillaries might be incorrectly evaluated in the aspect of the noise contribution to engine noise because the noise reflection effect of their neighbor engine structure is easily ignored. Consequently, noise source identification should be misled. This study investigates the fact that the engine structure located around an alternator reflects alternator noise, and the reflected noise acts as another alternator noise source in a heavy-duty diesel engine. The result shows that the alternator noise can be correctly estimated in engine noise by properly including the noise reflection effect.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.214-216
• /
• 2012

This paper relates to the automotive silencers reduce noise generated from the actual vehicle for the activity is based on was worth. To do this, the noise from cars to distinguish them by category, characteristics of turbo charger was designed to reduce noise. In order for the design of acoustic modeling using line dynamics, was analyzed using In house & the commercial software programs. Silencers have about several basic elements. Expand, collapse, perforated plate, and the combination are the basic reactive or dissipative elements. Finally, DFSS(design for six sigma) method was designed. and it was verified in vehicle test. The new developed silencers showed good performance vehicle test results. also, the net cost also indicated excellent results compared with other company.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.476-477
• /
• 2014

This paper relates to the automotive silencers reduce noise generated from the actual vehicle for the activity is based on was worth. To do this, the noise from cars to distinguish them by category, characteristics of turbo charger was designed to reduce noise. In order for the design of acoustic modeling using line dynamics, was analyzed using In house & the commercial software programs. Silencers have about several basic elements. Expand, collapse, perforated plate, and the combination are the basic reactive or dissipative elements. Finally, DFSS(design for six sigma) method was designed. and it was verified in vehicle test. The new developed silencers showed good performance vehicle test results. also, the net cost also indicated excellent results compared with other company.