• Corrosion Science and Technology
• /
• 제10권4호
• /
• pp.151-155
• /
• 2011

The iron oxide particles could be resulted from the corrosion of the circulating water system of a power plant. Because it may be one of the trouble materials which affect the power generation efficiency due to the deposition on steam generator tube and turbine blade, the continuous observation of its concentration is very important. The laser induced break-down detection (LIBD) technology was applied to monitor continuously the concentration of corrosion products with the detection limit of ppb level. The measurement system consists of a Nd:YAG pulsed laser, a polarizing beam splitter, a flow-type sample cell, an acoustic emission sensor, a high speed data acquisition board, a personal computer, etc.. The performance test results confirmed that this technology can be effective to monitor the corrosion product concentration of the circulating water system of a power plant.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.292-294
• /
• 2008

최근 환경 파괴와 에너지 고갈에 대한 문제들이 사회의 큰 문제로 대두 되면서 풍력발전의 중요성이 증가하고 있다. 본 논문에서는 LabVIEW를 이용하여 이더넷(Ethernet) 환경에서의 풍력발전 원격감시 제어시스템을 구현하였다. 제안된 원격감시 제어시스템은 풍력발전 시스템의 MCU와 W5100의 SPI(Serial Peripheral Interface)를 통한 이더넷 통신용 하드웨어를 구축하였으며, NI사의 LabVIEW를 이용하여 서버상의 HMI(Human Machine Interface) 소프트웨어를 구현하였다. 본 연구의 실험을 위해 영구자석형 동기 발전기(PMSG:Permanent Magnet Synchronous Generator)를 이용하여 풍력발전 시스템 모델을 구현하고 이를 이용하여 원격감시 제어시스템의 성능을 검증하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.521-526
• /
• 1997

The Spin Tester(High Speed Balancing and Overspeed Test Facility), which is designed for the quality control of turbine, generator, and rotors was supposed to be constructed with the use of Steel Fiber Reinforced Concrete(SERC) for reducing the risk of accident while operation. However, it was very existence of fiber concrete due to there are two major concern in the SFRC work: one is existence of fiber ball due to inhomogeneous mixing, the other is the segregation of the concrete materials. To avoid these possible problems, the S/a was controlled about 55% to reduce the segregation and the high range AE water reducing agent was used to maintain the slump over the value of 18cm. With these careful consideratons, the SFRC work was done successfully by only using regular equipments like pump car and vibrator.

• 전기학회논문지
• /
• 제62권3호
• /
• pp.312-321
• /
• 2013

In this study, we review the status of Southwest sea 2.5GW offshore wind project and expected various problems. And we suggest government policies for offshore wind industrialization. Especially, we would like to mention the necessity of offshore wind development in order to diversify power sources and guarantee energy security in Korea. And we would like to mention necessity and direction to make offshore wind into growth engine industry thorough fusion between industries and energization for the existing industry such as civil, shipbuilding, steel, etc. that was headed into downturn.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 전력전자학술대회 논문집
• /
• pp.238-239
• /
• 2013

It is a crucial requirement to utilize an economical battery capacity for the wind energy conversion system. In this paper, the optimal BESS capacity is determined for the wind farm whose dispatched power is assigned by the min-max dispatching method. Based on a lifetime cost function that indicates the BESS cost spent to dispatch 1kWh wind energy into grid, the battery capacity can be optimized so as to obtain the minimum system operation cost. Moreover, the battery state of charge (SOC) is also managed to be in a safe operating range to ensure the system undamaged. In order to clarify the proposed optimizing method, a 3MW permanent magnet synchronous generator (PMSG) wind turbine model and real wind speed data measured each minute are investigated.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 1999년도 추계학술대회 논문집
• /
• pp.176-180
• /
• 1999

미지 플랜트의 인식방법은 크게 두 가지로 나눌 수 있으며, 하나는 연역적 방법으로서 대상 플랜트에 대한 열적·유체 역학적 법칙을 사용하여 물리적으로 모델을 수식화하는 방식이고, 다른 하나는 귀납적 방법으로서 측정된 입출력데이터에 의해 역으로 구조를 찾아가는 방식이다. 본 논문에서는 후자의 방법으로 가스터빈 발전소의 배기가스 온도계통 모델을 구하기 위해 현장에서 운전 데이터를 취득하였다. 그리고 컴퓨터 시뮬레이션을 통해 경험적으로 구현한 모델이 실제 운전데이터와 유사한 특성을 보임을 알 수 있었다. 이렇게 구현된 모델은 향후 발전소용 가스터빈 제어시스템을 새로이 구축하거나 튜닝하고자 할 때 배기가스 온도제어계통을 설계하는데 기초자료로 활용할 수 있다.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 1999년도 추계학술대회 논문집
• /
• pp.170-175
• /
• 1999

본 논문에서는 국내에서 운전 중인 한 가스터빈 출력제어 회로의 구성을 살펴보고 현장에서 취득한 자료를 근거로 하여 가스터빈의 모델과 제어기의 조정, 그리고 MW 신호 피이드백 회로에 필터의 사용효과를 시뮬레이션을 통해 살펴보았다. 전력계통의 주파수가 가스터빈 출력제어계의 시상수에 비해 상당히 빠르게 변하므로 자동 주파수 추종을 할 경우 제어계가 쉽게 불안정해진다. 이 출력제어계의 MW 피이드백 회로의 1차지연 요소를 사용하면 안정성 향상에 좋은 효과가 있으며, 이 지연요소의 시상수를 크게 할수록 안정도는 더 향상되며 Open Loop의 특성을 보이게 된다. 그러나, 주파수 추종운전이 아닌 운전원의 출력 증감발 요구에는 시간지연 없이 응답을 하여야 하므로 적절한 설정을 할 필요가 있다. 가스터빈의 연료제어 계통을 포함한 출력제어계에 순수 시간지연 요소가 없으면 피이드백 회로에 1차지연 요소를 사용하지 않는 것이 더 좋은 출력제어 응답을 나타낸다. 그러나 실제 모들 가스터빈에는 다소 시간지연 요소를 포함하고 있으므로 일반적으로 피이드백 회로에 시간지연 요소를 사용하므로써 안정성을 향상시킬 수 있다.

• Advances in Energy Research
• /
• 제3권1호
• /
• pp.59-70
• /
• 2015

In India, continuous production of electricity and sweet/potable water from Solar power and desalination plant plays a major role in the industries. Particularly in Copper industry, Solar power adopts Solar field collector combined with thermal storage system and steam Boiler, Turbine & Generator (BTG) for electricity production and desalination plant adopts Reverse osmosis (RO) for sweet/potable water production which cannot be used for long hours of power generation and consistency of energy supply for industrial processes and power generation cannot be ensured. This paper presents an overview of enhanced technology for Solar power and Desalination plant for Copper industry making it continuous production of electricity and sweet/potable water. The conventional technology can be replaced with this proposed technique in the existing and upcoming industries.

• KIEE International Transactions on Power Engineering
• /
• 제4A권4호
• /
• pp.178-191
• /
• 2004

This paper presents a new approach to HVDC system control for damping subsynchronous oscillation (SSO) involving HVDC converters and turbine generator shaft systems. This requires a novel eigenvalue analysis (NEA) program, derivation of HVDC system modeling considering steady-state conditions and dynamic conditions in the combined AC/DC system, and an appropriate control scheme. The method suggested makes possible the design of a subsynchronous oscillation damping controller (SODC) to provide positive damping torque for the range of torsional modes in combined AC/DC systems. There are three steps involved in the design of a SODC； first the worst torsional mode is determined using the NEA program, next the SODC parameters are designed for the range of that torsional mode, and then finally an off-line simultaneous time domain program such as PSCAD/EMTDC is used to verify the parameters of the SODC. The suggested SODC design method is applied to two AC/DC systems, and its practicality is verified using the PSCAD/EMTDC simulation program.

• 전기학회논문지
• /
• 제59권11호
• /
• pp.2006-2011
• /
• 2010

The superheater in the thermal power plant makes the wet steam into the dry steam with high temperature and high pressure by using the boiler heat. The dry steam pressure rotates the turbine-generator system. The efficiency and life time of the boiler heavily depends on the steam temperature regulation. The steam temperature can be deviated from the reference by the MW demand of the power plant. It is therefore required that the PI(proportional-integral) controller should be robust against the disturbance such as the MW demand. In this paper, the PI controller with the integral state predictor is proposed and applied to regulate the steam temperature of the superheater, and it is compared with the conventional PI controller operated in the thermal power plant in view of control performance.