• 한국융합학회논문지
• /
• 제10권12호
• /
• pp.287-292
• /
• 2019

본 논문은 자동차 제동성능에 대한 운전자의 요구에 따라 브레이크 디스크 튜닝이 많이 이루어지고 있어, 자동차에 사용되고 있는 순정 디스크와 튜닝제품으로 나오고 있는 디스크의 열적거동을 FEM해석을 통해 분석하였다. 순정 디스크 모델링 및 튜닝 디스크 Model-1, Model-2, Model-3로 모델링을 하고 디스크 회전속도를 1000rpm으로 설정하여 해석을 실시하였다. 브레이크를 작동하면 디스크와 패드 접촉에 의해 발생하는 작동시 온도와 디스크 정지 후 마찰면의 온도, 열 변형 등 디스크 표면의 열적거동에 대하여 분석하였다. 브레이크 작동시(0-4.5초) 온도는 순정 디스크보다 튜닝 디스크가 34℃높게 나타났고, 디스크 정지 후(40.5초) 온도는 튜닝 디스크가 18℃낮게 분석되었으며, 디스크 열에 의한 변형은 튜닝 디스크가 0.3mm정도 많이 변형되었다. 순정 디스크와 튜닝 디스크의 열적거동에 따른 페이드 현상 등을 줄일 수 있는 효과는 있으나, 튜닝 디스크의 홀 가공 및 디스크 면 가공에 따른 열적거동에는 크게 변화가 없음을 관찰할 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.211-217
• /
• 1998

A disk rotor dynamic analysis program called by DR. DAP is developed for disk drive spindle systems to analyze dynamic characteristics in operation and to estimate the effects of excitation sources. It is applicable to design for stabilization and to select parts of disk drive spindle systems. The disk drive spindle system in this program is modeled as a flexible shaft with multiple flexible disks, which is supported by bearings and driven by electric motor, and its complicated coupled vibration characteristics are analyzed by using a substructure synthesis technique with the assumed-modes method. All the coupled modes of interest can be well predicted by the example of a three disk hard disk drive with the three tuning parameters. It is also shown that, with the introduction of the excitation sources associated with the defects of ball bearing systems, the magnetic unbalance of spindle motor, the program can well predict the stability of the system, i.e., the possibility of resonance.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.1089-1094
• /
• 2003

A main vibration source in HDD is arisen from high rotating disk/spindle, and vibration suppression of the disk-spindle system becomes a critical issue and a major concern for high performance of the drive. In this paper, we study the feasibility of suppressing unwanted vibration of disk-spindle system of the HDD by external shock and excitation utilizing piezoelectric shunt damping methodology. By considering dynamic characteristics of the disk-spindle system through modal analysis, a target vibration mode is determined and then the piezoelectric material is carefully integrated to the modified drive. In order to maximize improvement of vibration characteristics of the proposed system, shunt circuit is optimally designed via tuning processes. Finally, the vibration characteristics of the high rotating disk-spindle system of the proposed drive is experimentally evaluated in frequency domain.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.474-478
• /
• 2006

It is becoming more significant to develop a rotary voice coil motor(VCM) type's actuator for small form factor (SFF) optical disk drive(ODD), as portables are getting more and more popularized nowadays. The actuator which is applicable to small-sized ODD with a compact flash(CF) II card size was developed and fabricated. The experimental results showed that the finite element(FE) model is different from the fabricated model. And so flexible mode frequencies did not satisfy specifications of small-sized ODD, and tuning. Tuning procedures were required to improve dynamic characteristics of the fabricated actuator through finite difference method(FDM). At first, design variables were extracted through parameter study and the tuned FE model was improved by design of experiment(DOE). Consequently, It was confirmed that the improved model was applicable to SFF ODD.

• 한국정보과학회논문지:데이타베이스
• /
• 제35권6호
• /
• pp.518-532
• /
• 2008

모바일 환경에서는 상향링크와 하향링크의 대역특이 비대칭적이며 전력이 한정되어 있기 때문에 보다 효율적인 데이타 전송기술인 브로드캐스팅 방법이 연구되어 왔다. 브로드캐스트에서 인덱스를 사용하면 원하는 데이타가 언제 방송되는지를 알 수 있어 튜닝 시간을 줄이고, 전력의 소비를 줄일 수 있다. 지금까지 연구된 싱글 채널 인덱스 기법들은 모든 데이타 아이템이 동일한 확률로 접근되는 flat 브로드캐스트에 적합한 인덱스 기법들이다. 데이타 아이템에 대한 접근 확률이 편향되는 경우에는 멀티디스크 방송기법을 사용해야 효과적인 전송이 가능하나, 기존의 인덱스 기법들은 인덱스가 한 방송 주기 내에서 반복되어 방송되는 데이타 아이템을 가리킬 수 없기 때문에 멀티디스크 방송 기법에는 효과적이지 않다. 본 논문에서는 싱글 채널 인덱스 기법으로서 멀티디스크 방송에 적용되는 인덱스 기법인 MDEI (Multi-disk Exponential Index) 기법을 제안한다. 본 논문에서 제안하는 MDEI 기법은 각 디스크 별로 인덱스를 구성하기 때문에, 데이타에 대한 접근확률이 편향되는 경우에 flat 브로드캐스트를 사용하는 다른 인덱스 기법들보다 평균 접근 지연시간 시간을 크게 줄일 수 있다. 실험 결과는 데이타에 대한 접근 확률이 편향된 환경에서 MDEI가 평균 접근 지연시간에 있어서 매우 좋은 성능을 갖는 것을 보여준다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.132-139
• /
• 2008

The blade vibration problem of bladed disk is the most critical subject to consider since it directly affects the stable performance of the engine as well as life of the engine. Especially, due to complicated vibration pattern of the bladed disk, more effort was required for vibration analysis and test. The research of measuring the vibration of the bladed disk, using NSMS(Non-intrusive stress measurement) instead of Aeromechanics testing method requiring slip ring or telemetry system with strain gauge, was successful. These testing can report the actual stresses seen on the blades; detect synchronous resonances that are the source of high cycle fatigue (HCF) in blades; measure individual blade mis-tuning and coupled resonances in bladed disks. In order to minimize the error being created due to heat expansion, the tip timing sensor is installed parallel to the blade trailing edge, yielding optimal result. Also, when working on finite element analysis, the whole bladed disk has gone through three-dimensional analysis, evaluating the family mode. The result of the analysis matched well with the test result.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.871-876
• /
• 2008

The blade vibration problem of bladed disk is the most critical subject to consider since it directly affects the stable performance of the engine as well as life of the engine. Especially, due to complicated vibration pattern of the bladed disk, more effort was required for vibration analysis and test. The research of measuring the vibration of the bladed disk, using NSMS(Non-intrusive stress measurement) instead of Aeromechanics testing method requiring slip ring or telemetry system with strain gauge, was successful. These testing can report the actual stresses seen on the blades; detect synchronous resonances that are the source of high cycle fatigue(HCF) in blades; measure individual blade mis-tuning and coupled resonances in bladed disks. In order to minimize the error being created due to heat expansion, the tip timing sensor is installed parallel to the blade trailing edge, yielding optimal result. Also, when working on finite element analysis, the whole bladed disk has gone through three-dimensional analysis, evaluating the family mode. The result of the analysis matched well with the test result.

• 자동차안전학회지
• /
• 제7권3호
• /
• pp.19-24
• /
• 2015

Brake pads are a component of disc brake system of automobile and consist of steel backing plates and friction material facing the disk brake rotor. Due to the repeated sliding forces and torque in vehicle braking, friction performance of brake pads are ensured. Futhermore, the brake pad is one of major tuning components in aftermarket, mechanical characteristics of the brake pad are necessary to evaluate for establishing the certification standards of tuning components. This study had performed the five specimen tests for friction coefficients and wear loss rates according to the SAE test specification. Using the instrumented indentation method, yield strength and tensile strength were measured. Friction coefficients, 0.386 - 0.489, and wear loss rates, 1.0% - 3.7% are obtained. The range of yield strength and tensile strength are 21.4 MPa - 105.3 MPa and 39.5 MPa - 176.4 MPa respectively.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권11호
• /
• pp.3619-3637
• /
• 2022

Big data analytics offers endless opportunities for operational enhancement by extracting valuable insights from complex voluminous data. Hadoop is a comprehensive technological suite which offers solutions for the large scale storage and computing needs of Big data. The performance of Hadoop is closely tied with its configuration settings which depends on the cluster capacity and the application profile. Since Hadoop has over 190 configuration parameters, tuning them to gain optimal application performance is a daunting challenge. Our approach is to extract a subset of impactful parameters from which the performance enhancing sub-optimal configuration is then narrowed down. This paper presents a statistical model to analyze the significance of the effect of Hadoop parameters on a variety of performance metrics. Our model decomposes the total observed performance variation and ascribes them to the main parameters, their interaction effects and noise factors. The method clearly segregates impactful parameters from the rest. The configuration setting determined by our methodology has reduced the Job completion time by 22%, resource utilization in terms of memory and CPU by 15% and 12% respectively, the number of killed Maps by 50% and Disk spillage by 23%. The proposed technique can be leveraged to ease the configuration tuning task of any Hadoop cluster despite the differences in the underlying infrastructure and the application running on it.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 D
• /
• pp.2179-2181
• /
• 2004

Model-free Method들 중에 반복 피트백 조절 알고리즘(Iterative Feedback Tuning, IFT)는 특정한 성능지수를 정의하고, 이를 최소화하도록 제어기의 게인들을 조절하는 방법을 제시하였다. PID와 같은 고전적인 제어이론에 근거한 제어기 설계 과정과는 달리, IFT 알고리즘은 반복 실험을 통해 성능지수의 Gradient를 구하여 이로부터 필터 게인들 조정하는 방법을 채택하고 있다. 수학적 증명과 실험적 실증을 통하여 IFT의 수렴성과 유용성이 보여짐에도 불구하고 IFT 알고리즘의 한계점은 단일 성능지수의 사용이라는데 있다. 이를 개선하기 위해서는 단일 제어 목적을 위한 단일 성능지수의 사용이 아닌 복수의 제어 목적을 위한 복수의 성능지수의 사용이 필요하다. 본 논문에서는 두 개의 성능지수를 가지는 IFT를 이용해서 위상 여유가 크고, 대역폭이 넓은 제어기를 설계하기 위해서 제어기 게인을 자동 조절하는 알고리즘을 제안하고 ODD에서 사용되는 플랜트에 적용한 모의실험을 통하여 그 유용성을 보였다.