• 대한전자공학회논문지
• /
• 제18권5호
• /
• pp.22-29
• /
• 1981

게이트절연층을 위한 HCI 열처리법 텅그스텐 metallization 및 fumed silica epoxy를 쓴 다중층 encapsulation 기술을 감이온 전장효과 트랜지스터(ISFET) 제조에 활용하고 이의 동작특성을 조사하였다. 또 ISFET를 위한 이론적 모형을 제시하고 이 것이 실험사실과 잘 일치함을 보였다. 제조된 ISFET는 빠른 반응, 긴 수명 및 작은 이압특성을 나타내었는데, 특히 안정부는 크게 개선되었다.

• 전자공학회논문지D
• /
• 제34D권12호
• /
• pp.76-82
• /
• 1997

Chemical mechanical polishing (CMP) has become widely accepted for the planarization of multi-interconnect structures in semiconductor manufacturing. However, perfect planarization is not so easily ahieved because it depends on the pattern sensitivity, the large number of controllable process parameters, and the absence of a reliable process model, etc. In this paper, we realized the planarization of deposited oxide layers followed by metal (W) polishing as a replacement for tungsten etch-back process for via formation. Atomic force microscope (AFM) is used for the evaluation of pattern topography during CMP. As a result, AFM evaluation is very attractive compared to conventional methods for the measurment of planarity. mOreover, it will contribute to analyze planarization characteristics and establish CMP model.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1995년도 춘계학술발표회 초록집
• /
• pp.41-44
• /
• 1995

The electrochromic WO$_3$ thin films were prepared by using an electron - beam evaporation technique. The influence of the electron - beam evaporation conditions. especially the vacuum pressure, and resistance of ITO substrate on the structural and electrochromic properties of the investigated film was presented. This films showed electrochromic behavior in an aqueous electrolyte of 1 M H$_2$SO$_4$. Among these WO$_3$ thin films, films prepared at a vacuum pressure of 10$^{-4}$ mbar were found to be most stable in terms of cycling durability. The chemical stability of film against dissolution in the aqueous solution was also shown to depend on the quantity of water in the film.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2003년도 연료전지심포지움 2003논문집
• /
• pp.83-88
• /
• 2003

PtRu alloy and $PtRu-WO_3$ nanocomposite thin-film electrodes for methanol electrooxidation were fabricated by means of a sputtering method. The structural and electrochemical properties of well-defined PtRu alloy thin-film electrodes were characterized using X-ray diffraction, Rutherford backscattering spectroscopy. X-ray photoelectron spectroscopy, and electrochemical measurements. The alloy thin-film electrodes were classified as follows: Pt-based and Ru-based alloy structure. Based on structural and electrochemical understanding of the PtRu alloy thin-film electrodes, the well-controlled physical and (electro)chemical properties of $PtRu-WO_3$, showed superior specific current to that of a nanosized PtRu alloy catalyst, The homogeneous dispersion of alloy catalyst and well-formed nanophase structure would lead to an excellent catalytic electrode reaction for high-performance fuel cells. In addition, the enhanced catalytic activity in nanocomposite electrode was found to be closely related to proton transfer in tungsten oxide using in-situ electrochemical transmittance measurement.

• 태양에너지
• /
• 제19권1호
• /
• pp.1-8
• /
• 1999

Electrochromic $WO_3$ thin films were prepared by electron beam deposition. The transmission and durability of films were investigated. Coloring and bleaching experiments were repeated in an electrolyte of propylene carbonate with 0.6M of $LiClO_4$ by cyclic voltammetry. Spectrophotometer was used to measure the transmission in the degraded films. The 5000 ${\AA}$ thick film was found to be the stable after repeated cycles. The durability of the annealed film also showed improvements over unannealed samples. Tungsten oxide films with titanium content of about $10{\sim}15$ mol% was found to be most stable, undergoing the least degradation during the repeated cycles.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.83-84
• /
• 2006

Processing of W-Cu graded materials from attritor-milled W-CuO mixtures is described. The powder reduction steps are investigated by TG and XRD analyses and by microstructural observations (SEM, TEM). Sintering of reduced powder with different compositions is analysed by dilatometry. Sintering behaviour of the graded component processed by co-compaction of a 10/20/30wt%Cu multi-layer material is briefly discussed. Liquid Cu migration is observed and smooths the composition gradient. Perspectives to control this migration are discussed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.585-588
• /
• 2005

The dissolution characteristic of metal shows the different tendency according to the applied electrical potential, the kind of electrolyte and pH value, etc. In the micro electrochemical machining (ECM), unfavorable oxide/passive layer formation and overall corrosion of electrodes must be prevented. The anodic polarization curve of nickel has distinct three dissolution regions, i.e. two active regions and the transpassive dissolution region. In this paper, the stable electrode potentials of workpiece and tool were determined in sulfuric acid and hydrochloric acid solution, respectively. In each solution, different machining property was shown and possible electrochemical reactions were discussed. On the basis of this experiment, the methodology to obtain the proper electrode potential was suggested.

• 한국표면공학회지
• /
• 제20권2호
• /
• pp.60-73
• /
• 1987

For the purpose of improving the cyclic oxidation resistance of Ni-base superalloy, Inconel 600, aluminide coating methods are studied. The formation rate of aluminide coating layers is measured as a function of time and pack composition to find out the optimum coating condition. The evaluation of cyclic oxidation is established by the change in weight, the microphotography and EPMA of cross sectional area during $200^{\circ}C\;{\leftrightarrow}\;950^{\circ}C\;and\;200^{\circ}C\;{\leftrightarrow}\;1100^{\circ}C$, respectively. The thickness of coating layer and weight gains are parabolic behavior in propotion to time and Al contents. In pack of low aluminum contents, 2 wt%, however, weight gain is decreased when activator, $NH_4Cl$ is higher than 2 wt%. The cyclic oxidation resistance of the coating carried out at 1100$^{\circ}C$ are superior to those of the coating diffusion-treated after pack cementation at 800$^{\circ}C$. Aluminide oxide, which is formed in external scale, is barrier to the cyclic oxidation.

• 한국재료학회지
• /
• 제2권3호
• /
• pp.180-190
• /
• 1992

ZMR공정에서 발생하기 쉬운 폴리실리콘의 엉김현상(agglomeration), 슬림, 그리고 실리콘기판이 국부적으로 녹는 현상 등을 방지하기 위한 방법과 재결정화된 박막의 질을 향상시키기 위하여 폴리실리콘과 보호 산화막(capping oxide)두계를 변화시킨 실험 결과를 서술한다. 폴리실리콘의 엉김현상은 폴리실리콘과 보호 산화막 그리고 폴리실리콘과 매몰 산화막(buried oxide)의 계면에서의 wetting각과 관계되는데, 엉김현상을 방지하기 위해서는 암모니아 가스 분위기에서 $1100^{\circ}$C, 3시간 동안 열처리하여 폴리실리콘과 보호 산화막 그리고 폴리실리콘과 매몰 산화막의 계면에 질소를 주입시키면 된다. 실리콘 기판의 뒷면이 국부적으로 녹아 SOI구조가 파괴되는 현상과 슬립은 실리콘 기판의 뒷면을 모래타격(sandblast)하여 약 $20{\mu}m$의 거칠기를 가지도록 했을때 방지할 수 있었다. 재결정화된 폴리실리콘의 두께가 두꺼워짐에 따라 재결정화된 박막에서 subboundary의 간격은 넓어지고, 재결정화된 실리콘 두께의 균일성은 보호 산화막이 두꺼울수록 향상된다. 폴리실리콘의 두께를 $1{\mu}m$로 하였을때 subboundary의 간격은 약 $70-120{\mu}m$정도였고 폴리실리콘의 두께가 $1{\mu}m$이고 보호산화막의 두께가 $2.5{\mu}m$일때, 재결정화 후 실리콘의 두게 균일도는 약 ${\pm}200{\AA}$정도였다.

• 한국분말재료학회지
• /
• 제10권6호
• /
• pp.422-429
• /
• 2003

The reduction mechanism of the composite powders mixed with $WO_3$ and CuO has been studied by using thermogravimetry (TG), X-ray diffraction, and microstructure analyses. The composite powders were made by simple Turbula mixing, spray drying, and ball-milling in a stainless steel jar with the ball to powder ratio of 32 to 1 at 80 rpm for 1 h without process controlling agents. It is observed that all the oxide composite powders are converted to W-coated Cu composite powder after reducing treatment under hydrogen atmosphere. For the formation mechanism of W-coated Cu composite powder, the sequential reduction steps are proposed as follows: CuO contained in the ball-milled composite powder is initially reduced to Cu at the temperature range from 20$0^{\circ}C$ to 30$0^{\circ}C$. Then, $WO_3$ powder is reduced to W $O_2$ via W $O_{2.9}$ and W $O_{2.72}$ at higher temperature region. Finally, the gaseous phase of $WO_3(OH)_2$ formed by reaction of $WO_2$ with water vapour migrates to previously reduced Cu and deposits on it as W reduced by hydrogen. The proposed mechanism has been proved through the model experiment which was performed by using Cu plate and $WO_3$ powder.