• 대한화학회지
• /
• 제10권1호
• /
• pp.32-42
• /
• 1966

$CaCl_2$, CaO 및 $WO_3$로 構成되는 熔融鹽을 黑鉛 陽極과 鐵 陰極으로 電解하여 순수한 金屬텅스텐을 얻는 方法에 관하여 실험하였다. 電氣分解에 적합한 熔融浴을 選定하기 위하여 $CaCl_2$-CaO系와 $CaCl_2-CaWO_4$系에 관한 二相 狀態圖를 작성하였으며 同時에 $CaCl_2$와 $WO_3$와의 高溫下에서의 化學反應을 검토하여 安定한 電解浴을 얻기 위해서는 一定量의 CaO가 添加되어야 할 것임을 알 수 있었다. 炭素陽極을 사용하여 $WO_3$를 W와 CO로 분해시킬 때의 分解電壓은 -0.1 volt이었으며 熱力學的 計算에 의한 것은 -0.3 volt이었다. 熔融鹽을 電氣分解한 結果 金屬텅스텐이 100%에 가까운 電流效率로 電極에 析出되나 이는 陽極에서 二次的으로 발생하는 CO가스에 의하여 쉽게 WC등으로 변화하므로 순수한 텅스텐을 얻기 위해서는 電解浴의 溫度를 $1100^{\circ}C$이상으로 유지하여야 된다는 것을 알게 되었다. 電解浴의 組成은 可及的 低融點과 $WO_3$의 分解, $CaCl_2$의 蒸發 등을 억제하기 위해서는 $CaCl_2$ 100分에 대하여 CaO와 $WO_3$가 각 10 乃至 20分이 適切하였으며 CaO와 $WO_3$의 몰比率은 1이상이 요구되었다. 陰極 電流密度를 1~5 $amp/cm^2$의 範圍에서 變化시켜도 電流效率에 큰 影響이 없었다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 추계학술발표대회
• /
• pp.33.1-33.1
• /
• 2009

To date, nanostructured tungsten oxides with a variety of stoichiometries, such as WO3, WO2.9, W18O49, and WO2, have been prepared, because they are promising candidates for applications such as gas sensors, photocatalysts, electrochromic devices, and field emission devices. Among them, W18O49 and WO2 have been widely studied due to their outstanding chemical sensing, catalytic, and electron emissive properties. Here we report, for the first time, a one-pot solution-phase route to synthesizing a novel composite hierarchical hollow structure without adding catalysts, surfactants, or templates. The products, consisting of a WO2 hollow core sphere surrounded by a W18O49 nanorod shell (yielding a sea urchin-like structure), were generated as discrete structures via Ostwald ripening. To our knowledge, this type of composite hierarchical core/shell structure has not been reported previously. The morphological evolution and the detailed growth mechanism were carefully studied. We also demonstrate that the size of the hollow urchins is readily tunable by controlling the reactant concentrations.Interestingly, although bulk tungsten oxides are weakly paramagnetic or diamagnetic, the as-prepared products show unusual ferromagnetic behavior atroom temperature. The urchin structures also show a very high Brunauer-Emmet-Teller (BET) surface area, suggesting that they may potentially be applied to chemical sensor or effective catalyst technologies.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.239.2-239.2
• /
• 2016

Numerous studies and approaches have been performed for solar cells to improve their photoelectric conversion efficiencies. Among them, the study for electrode containing transparent conducting oxide (TCO) layers is one of issues as well as for the cell structure based on band theory. In this study, we focused on an interfacial layer between p-type silicon and indium tin oxide (ITO) well-known as TCO materials. According to current-voltage characteristics for the sample with the interfacial layers, the improvement of band alignment between p-type silicon and ITO was observed, and their ohmic properties were enhanced in the proper condition of deposition. To investigate cause of this improvement, spectroscopic ellipsometry and ultraviolet photoelectron spectroscopy were utilized. Using these techniques, band alignment and defect in the band gap were examined. The major materials of the interfacial layer are vanadium oxide and tungsten oxide, which are notable as a hole transfer layer in the organic solar cells. Finally, the interfacial layer was applied to silicon solar cells to see the actual behavior of carriers in the solar cells. In the case of vanadium oxide, we found 10% of improvement of photoelectric conversion efficiencies, compared to solar cells without interfacial layers.

• 한국세라믹학회지
• /
• 제51권4호
• /
• pp.260-264
• /
• 2014

We developed a novel double dopant bismuth oxide system with Tb and W. When Tb was doped as a single dopant, a Tb dopant concentration more than 20 mol% was required to stabilize bismuth oxides with a high conductivity cubic structure. High temperature XRD analysis of 25 mol% Tb-doped bismuth oxide (25TSB) confirmed that the cubic structure of 25TSB was retained from room temperature to $700^{\circ}C$ with increase in the lattice parameter. On the other hand, we achieved the stabilization of high temperature cubic phase with a total dopant concentration as low as ~12 mol% with 8 mol% Tb and 4 mol% W double dopants (8T4WSB). Moreover, the measured ionic conductivity of 10T5WSB was much higher than 25TSB, thus demonstrating the feasibility of the double dopant strategy to develop stabilized bismuth oxide systems with higher oxygen ion conductivity for the application of SOFC electrolytes at reduced temperature. In addition, we investigated the long-term stability of TSB and TWSB electrolytes.

• 대한기계학회논문집
• /
• 제6권2호
• /
• pp.113-120
• /
• 1982

In the previously reported Part I, the experimental results in frictional machining that finished medium carbon steel SM 50 C under 6 kinds of liquid atmospheres by using ceramic tip as a frictional tool was described. The present study reports the experimental results that all the machining conditions are same in the Part I except tool material changed ceramics into tungsten carbide. The ceramic tool material is a stable oxide and a non-metallic material, but the tungsten carbide has the metallic characteristics that adhere to carbon steel at about 750.deg.C. The present study shows th comparison of the experimental results for the above 2 kinds of frictional tool material.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2002년도 춘계학술강연 및 발표대회
• /
• pp.53-53
• /
• 2002

본 연구에서는 산화텅스텐($WO_3$) 분말을 이용하여 여러 금속 기판에 텅스텐 박막을 코팅하는 방법에 관한 연구를 수행하였다. 본 연구에서 언급되는 W 코팅은 Lee 등이 보고한 W, Cu 산화물을 이용하여 W-Cu 복합분말을 제조하는 것으로부터 아이디어가 출발되었으며, 본 연구의 결과는 기존의 6불화 텅스텐 가스($WF_6$) 를 열 분해하여 증착시키는 화학증착법(CVD: chemical vapor deposition)과 순수 텅스텐 target을 sputtering하여 증착시키는 물리증착법(PVD: physical vapor deposition)과 달리, 산화텅스텐 분말, 금속 기판, 및 수소 가스만을 사용하기 때문에 경제적으로 큰 장점이 있는 새로운 코팅법의 하나로 연구되었다. 본 연구에서는 새로운 코팅법의 기구와 여러 금속에서 코팅되는 W의 코팅 현상 등에 대해 간단히 언급하고자 하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제7권3호
• /
• pp.108-111
• /
• 2006

The oxidizer-induced corrosion state and microstructure of surface passive metal-oxide layer greatly influenced on the removal rate of tungsten film according to the slurry chemical composition of different mixed oxidizers. In this paper, the actual polishing mechanism and pH-potential equilibrium diagram obtained from potentiodynamic polarization curve were electrochemically compared. An electrochemical corrosion effect implies that slurries with the highest removal rate (RR) have the high dissolution rate.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.321-321
• /
• 2010

The PEDOT:PSS layer is usually used as hole transporting layer for the polymer bulk heterojunction solar cells. However, the interface between ITO and PEDOT:PSS is not stable and the chemical reaction between ITO and PEDOT can result in degraded device performance. We used the tungsten oxides as a hole transport layer by spin-coating. The $WO_3$ nanoparticles were well dispersed in ammonium hydroxide and deionized water and formed thin layer on the ITO anode. We found that $WO_3$ surface is more hydrophobic than the bare ITO or PEDOT:PSS-coated surfaces. The hydrophobic surfaces promote an ordered growth of P3HT films. A higher degree of P3HT ordering is expected to improve the hole mobility and the lifetime of the device using the tungsten oxide showed better stability compared to the device using the PEDOT:PSS.

• Bulletin of the Korean Chemical Society
• /
• 제12권1호
• /
• pp.80-85
• /
• 1991

Laser Raman spectroscopy has been used to study the tungsta catalyst supported on titania. The surface tungsten species which forms on titania after calcination appeared to possess a structure that is independent of the initial impregnation condition. The surface polytungstate seemed to be stable only at the interfacial region since the crystalline WO$_3$ phase was observed as long as the tungsta loading was in excess of monolayer coverage. The close intact and strong interaction between the polytungstate and the titania could be evidenced from the inhibition of the phase transition of TiO$_2$ from anatase to rutile.

• 한국재료학회지
• /
• 제26권12호
• /
• pp.751-756
• /
• 2016

Graphite was diffusion-bonded by hot-pressing to W-25Re alloy using a Ti interlayer. For the joining, a uniaxial pressure of 25 MPa was applied at $1600^{\circ}C$ for 2 hrs in an argon atmosphere with a heating rate of $10^{\circ}C\;min^{-1}$. The interfacial microstructure and elemental distribution of the W-25Re/Ti/Graphite joints were analyzed by scanning electron microscopy (SEM). Hot-pressed joints appeared to form a stable interlayer without any micro-cracking, pores, or defects. To investigate the high-temperature stability of the W-25Re/Ti/Graphite joint, an oxy-acetylene torch test was conducted for 30 seconds with oxygen and acetylene at a 1.3:1 ratio. Cross-sectional analysis of the joint was performed to compare the thickness of the oxide layer and its chemical composition. The thickness of W-25Re changed from 250 to $20{\mu}m$. In the elemental analysis, a high fraction of rhenium was detected at the surface oxidation layer of W-25Re, while the W-25Re matrix was found to maintain the initial weight ratio. Tungsten was first reacted with oxygen at a torch temperature over $2500^{\circ}C$ to form a tungsten oxide layer on the surface of W-25Re. Then, the remaining rhenium was subsequently reacted with oxygen to form rhenium oxide. The interfacial microstructure of the Ti-containing interlayer was stable after the torch test at a temperature over $2500^{\circ}C$.